1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

What have you done to your 5th Gen 4Runner today?

Discussion in '5th Gen 4Runners (2010-2024)' started by Bob, Jul 24, 2016.

  1. Mar 8, 2026 at 7:21 PM
    Rocket-67

    Rocket-67 New Member

    Joined:
    Sep 8, 2025
    Member:
    #48912
    Messages:
    287
    Gender:
    Male
    First Name:
    Chris
    SE New Mexico
    Vehicle:
    '19 4 Runner TRD Off-road
    Ok, so I messed up with 1 door, apparently I missed the latch cable and can't open it from the inside or outside.
    Is there a way to access the cable to release the door to get it opened?

    Passenger Right Rear door
     
  2. Mar 8, 2026 at 7:47 PM
    BoiseG

    BoiseG New Member

    Joined:
    Mar 31, 2024
    Member:
    #39509
    Messages:
    318
    Gender:
    Male
    Vehicle:
    2024 ORP
    My 2 year anniversary with my 4R is March 30 and this is the first I'm hearing of this thing. What is it, and should I be lubing it? lol
     
    ualfltdispatch likes this.
  3. Mar 8, 2026 at 8:48 PM
    Gravel

    Gravel New Member

    Joined:
    Apr 9, 2024
    Member:
    #39722
    Messages:
    116
    Gender:
    Male
    Vehicle:
    SR5 4x4
    I did that on my Dodge 2500 quadcab, I had to pull the inner door panel partially off from inside the cab in order to reach the cable and pull it manually. It sucked, but it worked. You’re probably gonna have to do something similar.
     
    LCJ77 and Rocket-67[QUOTED] like this.
  4. Mar 9, 2026 at 6:36 AM
    HazOpRed

    HazOpRed 22' TRDOR

    Joined:
    Dec 28, 2022
    Member:
    #30288
    Messages:
    334
    Gender:
    Male
    Printed a grab handle for my Prinsu roof rack, since Prinsu thinks they can charge $130. This one was about $2. I don't think my Bambu P2s has the buildplate volume to design it to fit both bolt holes but I might prototype it. Might even add a spot for Prinsu's light

    s20260308_223909.jpg 20260308_223913.jpg
     
  5. Mar 9, 2026 at 8:08 AM
    4runningMan

    4runningMan New Member

    Joined:
    Sep 23, 2018
    Member:
    #7255
    Messages:
    2,923
    New Mexico
    Could you give us some more details on this?
     
  6. Mar 9, 2026 at 8:47 AM
    glwood54

    glwood54 Stop making me buy stuff!

    Joined:
    Aug 19, 2019
    Member:
    #10964
    Messages:
    8,388
    Gender:
    Male
    First Name:
    Gary
    Land of Enchantment
    Vehicle:
    2019 OR, KDSS, RSG sliders, Eibach shocks, 265/70 Falken Wildpeak AT4
  7. Mar 9, 2026 at 8:47 AM
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    6,471
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Jan. 2024: custom installed 2lb fire extinguisher between drivers seat and door -Feb. 2024: swapped interior lighting to diode dynamics led’s -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting -Feb. 13/2024: double ditch lights, on new Rago Fabrication Extension brackets. -3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Existing: 3inch EVERGEAR clear lens LED pods -May 2024: custom black aluminum grille mesh installed in front of factory plastic -June 2024: custom built powder coated dom sliders -Nov. 2024: thermo-plastic rear mudflaps -Dec. 2024: rear bumper cover clearance cut, sprayed newly exposed parts black -Jan. 2025: trailer hitch removal, relocation of rear led pods to crossmember New: -Exhaust pipe chop after axle -March 2025: new SPC upper control arms, bushings, balljoints. Raised front end 0.75” via Bilstein 5100 spring seat. -April 2025: Evergear bezel-less cube ditch lights 4 LEDs 40W 3.33A 4800Lm 328’ beam distance 30° 6000k beam angle shatter & crack resistant lens -April 2025: Evergear Ultra Series light bar 27-3/4” flood spot combo 60 LEDs 60W 5A 6000Lm 1227’ beam distance Dual row, dual beam angle 30°/60° April 2025: BULLY Rock Crawler Hi-Intensity LED Utility Lights, Pair 1260 lumens @ 15w (3 x 5w CREE) each 120° flood beam waterproof, dustproof. Under hood: -Blue Fire 6-Circuit Fuse Block w/ LED Indicator & Protection Cover -Blue Sea 100A Circuit Breaker w/ reset lever In progress/in the garage queue: ~ Wanted - 80% OFFROAD Hitch Replacement Recovery Point, PerryParts or Wheelers bump stops, 1" body lift, custom dom front bumper, winch, rear dom bumper with side hoops, kdss angle correction, C or D load 35’s, bolt on cat shields

    @BoiseG
    @4runningMan



    of course (all the info is below, sorry you’ll have to read for a minute):



    https://youtube.com/shorts/wK82Pp5KW0E?si=NyPFCQ2XVl-TgBKp

    https://youtu.be/q34h9lqlqYE?si=TG3mOd5COUv_hizX
     
  8. Mar 9, 2026 at 8:54 AM
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    6,471
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Jan. 2024: custom installed 2lb fire extinguisher between drivers seat and door -Feb. 2024: swapped interior lighting to diode dynamics led’s -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting -Feb. 13/2024: double ditch lights, on new Rago Fabrication Extension brackets. -3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Existing: 3inch EVERGEAR clear lens LED pods -May 2024: custom black aluminum grille mesh installed in front of factory plastic -June 2024: custom built powder coated dom sliders -Nov. 2024: thermo-plastic rear mudflaps -Dec. 2024: rear bumper cover clearance cut, sprayed newly exposed parts black -Jan. 2025: trailer hitch removal, relocation of rear led pods to crossmember New: -Exhaust pipe chop after axle -March 2025: new SPC upper control arms, bushings, balljoints. Raised front end 0.75” via Bilstein 5100 spring seat. -April 2025: Evergear bezel-less cube ditch lights 4 LEDs 40W 3.33A 4800Lm 328’ beam distance 30° 6000k beam angle shatter & crack resistant lens -April 2025: Evergear Ultra Series light bar 27-3/4” flood spot combo 60 LEDs 60W 5A 6000Lm 1227’ beam distance Dual row, dual beam angle 30°/60° April 2025: BULLY Rock Crawler Hi-Intensity LED Utility Lights, Pair 1260 lumens @ 15w (3 x 5w CREE) each 120° flood beam waterproof, dustproof. Under hood: -Blue Fire 6-Circuit Fuse Block w/ LED Indicator & Protection Cover -Blue Sea 100A Circuit Breaker w/ reset lever In progress/in the garage queue: ~ Wanted - 80% OFFROAD Hitch Replacement Recovery Point, PerryParts or Wheelers bump stops, 1" body lift, custom dom front bumper, winch, rear dom bumper with side hoops, kdss angle correction, C or D load 35’s, bolt on cat shields
    BoiseG, NB4x4 and 4runningMan like this.
  9. Mar 9, 2026 at 10:02 AM
    MWinkTRD

    MWinkTRD Basically Stock

    Joined:
    Sep 10, 2023
    Member:
    #35614
    Messages:
    187
    Gender:
    Male
    First Name:
    Max
    Southeast Alabama
    Vehicle:
    2023 MGM TRD ORP
    1” Cornfed Level & 265/70/17 Cooper RTs
    Spring has sprung in Alabama. The yellow pollen is out in full force :confused:
    IMG_6787.jpg
     
  10. Mar 9, 2026 at 10:18 AM
    dgrenier15

    dgrenier15 New Member

    Joined:
    Feb 27, 2023
    Member:
    #31489
    Messages:
    323
    Gender:
    Male
    First Name:
    Dayne
    Oklahoma
    Vehicle:
    2022 AG TRD ORP
    Been quiet as of late. New home and renovations have taken over weekend time. Wife has a road trip coming up this weekend so tire rotation, oil change and new wiper blades.

    Don't read this and get too excited guys in other news she did say having an awning when we go camping would be a good idea...but I told her in order to have an awning we "need" a full length roof rack
     
    Gman2530 and Rocket-67 like this.
  11. Mar 9, 2026 at 12:08 PM
    Oscar

    Oscar New Member

    Joined:
    Mar 10, 2025
    Member:
    #45968
    Messages:
    328
    Arizona
    Vehicle:
    2022 Lime Rush TRD Pro
    Falken Wildpeak A/T4W 285/70/17 D2 Off-Road sliders Talon Garage skid plates AVS 322025 bug guard DD Audio doors & sub; Kicker amp interior LEDs
    Yazzman, nimby, BoiseG and 6 others like this.
  12. Mar 9, 2026 at 1:43 PM
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    6,471
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Jan. 2024: custom installed 2lb fire extinguisher between drivers seat and door -Feb. 2024: swapped interior lighting to diode dynamics led’s -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting -Feb. 13/2024: double ditch lights, on new Rago Fabrication Extension brackets. -3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Existing: 3inch EVERGEAR clear lens LED pods -May 2024: custom black aluminum grille mesh installed in front of factory plastic -June 2024: custom built powder coated dom sliders -Nov. 2024: thermo-plastic rear mudflaps -Dec. 2024: rear bumper cover clearance cut, sprayed newly exposed parts black -Jan. 2025: trailer hitch removal, relocation of rear led pods to crossmember New: -Exhaust pipe chop after axle -March 2025: new SPC upper control arms, bushings, balljoints. Raised front end 0.75” via Bilstein 5100 spring seat. -April 2025: Evergear bezel-less cube ditch lights 4 LEDs 40W 3.33A 4800Lm 328’ beam distance 30° 6000k beam angle shatter & crack resistant lens -April 2025: Evergear Ultra Series light bar 27-3/4” flood spot combo 60 LEDs 60W 5A 6000Lm 1227’ beam distance Dual row, dual beam angle 30°/60° April 2025: BULLY Rock Crawler Hi-Intensity LED Utility Lights, Pair 1260 lumens @ 15w (3 x 5w CREE) each 120° flood beam waterproof, dustproof. Under hood: -Blue Fire 6-Circuit Fuse Block w/ LED Indicator & Protection Cover -Blue Sea 100A Circuit Breaker w/ reset lever In progress/in the garage queue: ~ Wanted - 80% OFFROAD Hitch Replacement Recovery Point, PerryParts or Wheelers bump stops, 1" body lift, custom dom front bumper, winch, rear dom bumper with side hoops, kdss angle correction, C or D load 35’s, bolt on cat shields
  13. Mar 9, 2026 at 2:12 PM
    Tooly

    Tooly New Member

    Joined:
    Mar 1, 2021
    Member:
    #20051
    Messages:
    532
    Okanagan, BC Canada
    Vehicle:
    2024 4Runner Off Road Solar Octane / 2024 GR Corolla Circuit
    Well you don't "need" a full rack to mount an awning (I have one with the factory rails) but I get where you're coming from lol
     
    Gman2530 likes this.
  14. Mar 9, 2026 at 2:23 PM
    LCJ77

    LCJ77 New Member

    Joined:
    Jul 12, 2022
    Member:
    #27794
    Messages:
    1,636
    Gender:
    Male
    First Name:
    Kevin
    Gilbertsville,Pa.
    Vehicle:
    2023 TRD Pro Ice Cap
    Ceramic Tint, D/S grab Handle, waiting for Brite Box Anytime, may add Raptor lights
    I think he's wants one & that's the reason he's telling the Mrs. if she was an awning they'll "Need" full roof rack:notsure:
     
    dgrenier15 and Stoney Ranger like this.
  15. Mar 9, 2026 at 2:42 PM
    wingo

    wingo *****

    Joined:
    Nov 15, 2022
    Member:
    #29635
    Messages:
    429
    Gender:
    Male
    Vehicle:
    2020 Venture
    Looks like the hande I got from Amazon, https://www.amazon.com/dp/B07QN3YRDS?th=1
     
    Oscar likes this.
  16. Mar 9, 2026 at 3:22 PM
    jwctaco

    jwctaco Retired , driving slow in the fast lane

    Joined:
    Apr 19, 2024
    Member:
    #39916
    Messages:
    901
    Gender:
    Male
    First Name:
    Jim
    S.W. Michigan
    Vehicle:
    23’ T4R
    The hinged Plano , $40 each
     
  17. Mar 9, 2026 at 5:15 PM
    das goot

    das goot New Member

    Joined:
    Nov 18, 2023
    Member:
    #36792
    Messages:
    42
    Gender:
    Male
    Portland, Maine
    Vehicle:
    2015 SR5 4runner
    lots of heavy stuff that might rust.
    finally finish wired new winch and installed 4 HF pod lights on winch bumper. I also took fresh hub to fender measurements so I can order a new suspension. I am currently way below factory ride height front and rear with all of the weight I have. I waited 3 years to be as close as possible to the final version before I even thought about struts/shocks and spring...the time has come, hooray!
     
    NB4x4 and TrailSpecial22 like this.
  18. Mar 9, 2026 at 5:48 PM
    replica9000

    replica9000 New Member

    Joined:
    Sep 7, 2019
    Member:
    #11179
    Messages:
    619
    First Name:
    Jason
    New Vertiform City
    Vehicle:
    2019 TRD OR Premium
    Dobinsons 2.5" lift. Cooper AT3 XLT 295/70R17.
    Took advantage of the warm weather and extra daylight to change my oil, filled up the gas tank before the next price jump and went for a short joy ride.
     
  19. Mar 9, 2026 at 6:00 PM
    themcnertney

    themcnertney New Member

    Joined:
    Jul 7, 2025
    Member:
    #47942
    Messages:
    179
    Gender:
    Male
    Canal Fulton, OH
    Vehicle:
    2019 SR5 Premium
    Broke loose the heat shield above the muffler on the way to cincy. This is the second one now. Anf burnt my forearm on the muffler.

    IMG_0910.jpg
     
    BoiseG, Gman2530, djwantke and 4 others like this.
  20. Mar 9, 2026 at 7:42 PM
    dgrenier15

    dgrenier15 New Member

    Joined:
    Feb 27, 2023
    Member:
    #31489
    Messages:
    323
    Gender:
    Male
    First Name:
    Dayne
    Oklahoma
    Vehicle:
    2022 AG TRD ORP
    Precisely. Haha its the first "needed" domino to fall to get the awning domino to fall :dancingbacon:
     
    LCJ77[QUOTED] likes this.
  21. Mar 9, 2026 at 8:57 PM
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    6,471
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Jan. 2024: custom installed 2lb fire extinguisher between drivers seat and door -Feb. 2024: swapped interior lighting to diode dynamics led’s -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting -Feb. 13/2024: double ditch lights, on new Rago Fabrication Extension brackets. -3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Existing: 3inch EVERGEAR clear lens LED pods -May 2024: custom black aluminum grille mesh installed in front of factory plastic -June 2024: custom built powder coated dom sliders -Nov. 2024: thermo-plastic rear mudflaps -Dec. 2024: rear bumper cover clearance cut, sprayed newly exposed parts black -Jan. 2025: trailer hitch removal, relocation of rear led pods to crossmember New: -Exhaust pipe chop after axle -March 2025: new SPC upper control arms, bushings, balljoints. Raised front end 0.75” via Bilstein 5100 spring seat. -April 2025: Evergear bezel-less cube ditch lights 4 LEDs 40W 3.33A 4800Lm 328’ beam distance 30° 6000k beam angle shatter & crack resistant lens -April 2025: Evergear Ultra Series light bar 27-3/4” flood spot combo 60 LEDs 60W 5A 6000Lm 1227’ beam distance Dual row, dual beam angle 30°/60° April 2025: BULLY Rock Crawler Hi-Intensity LED Utility Lights, Pair 1260 lumens @ 15w (3 x 5w CREE) each 120° flood beam waterproof, dustproof. Under hood: -Blue Fire 6-Circuit Fuse Block w/ LED Indicator & Protection Cover -Blue Sea 100A Circuit Breaker w/ reset lever In progress/in the garage queue: ~ Wanted - 80% OFFROAD Hitch Replacement Recovery Point, PerryParts or Wheelers bump stops, 1" body lift, custom dom front bumper, winch, rear dom bumper with side hoops, kdss angle correction, C or D load 35’s, bolt on cat shields
    i like the boots though
     
    themcnertney[QUOTED] likes this.
  22. Mar 9, 2026 at 9:09 PM
    Gman2530

    Gman2530 New Member

    Joined:
    Mar 23, 2023
    Member:
    #31923
    Messages:
    444
    Gender:
    Male
    First Name:
    Gary
    Vehicle:
    2018 SR5 4wd 4Runner
    just want to share I am also running the Lasfit low beams and recently installed the high beams quantum Leap difference from my 2018 lights. They’re freaking amazing. also did the Lasfit turn signals the fronts are switchbacks amber/White also did the rears and the driving/fog lights with Lasfits
    Used yellow film on the lenses .. I don’t have any pics of them all on, but I’ll take a few soon and post them up. I’m in Southern California. The weather is mild but I’ve driven in rain heavy rain snow a lot of desert camping so far so good.IMG_0856.jpg
     
    Last edited: Mar 9, 2026
    alittleoff and Rocket-67 like this.
  23. Mar 9, 2026 at 11:50 PM
    FoxVonTrap

    FoxVonTrap Fox

    Joined:
    Sep 4, 2025
    Member:
    #48852
    Messages:
    9
    Gender:
    Female
    First Name:
    Fox
    Reno
    Vehicle:
    2016 magnetic grey 4R
    Bilstein 4600s and a 3/2 leveling kit ❤️dfuns 2026-03-09 153038BC3124F28C3E.jpg nt16 2026-03-09 1528384B4B31CACAC5.jpg

    hoga 2026-03-09 1532302BEBE28CF46F.jpg
    hoga 2026-03-09 2352239A1F40A3D5A8.jpg
     
  24. Mar 10, 2026 at 6:46 AM
    NB4x4

    NB4x4 New Member

    Joined:
    Dec 25, 2025
    Member:
    #50653
    Messages:
    1,040
    Gender:
    Male
    Illinois
    Vehicle:
    2003 v8 sr5 4wd
    How'd it turn out?
     
  25. Mar 10, 2026 at 6:47 AM
    NB4x4

    NB4x4 New Member

    Joined:
    Dec 25, 2025
    Member:
    #50653
    Messages:
    1,040
    Gender:
    Male
    Illinois
    Vehicle:
    2003 v8 sr5 4wd
    Toyota 82712-04081 Yes? No?

    Found it!!! I think. https://www.toyotapartsdeal.com/oem/toyota~support~wiring~harn~82712-60840.html
     
    Last edited: Mar 10, 2026
  26. Mar 10, 2026 at 6:57 AM
    Turd Ferguson

    Turd Ferguson New Member

    Joined:
    Jun 4, 2017
    Member:
    #4146
    Messages:
    2,750
    Gender:
    Male
    MA
    Vehicle:
    2017 TRD Offroad Premium
    If Toyota would use big fender washers on the heat shields they wouldn’t fall off so easily.
     
    themcnertney[QUOTED] and NB4x4 like this.
  27. Mar 10, 2026 at 8:19 AM
    replica9000

    replica9000 New Member

    Joined:
    Sep 7, 2019
    Member:
    #11179
    Messages:
    619
    First Name:
    Jason
    New Vertiform City
    Vehicle:
    2019 TRD OR Premium
    Dobinsons 2.5" lift. Cooper AT3 XLT 295/70R17.
    Mine is barely hanging on by s bolt, rattling on the muffler. I'll probably take it off today I think the bolts that hold it on are too rusty to fix it.
     
    NB4x4 likes this.
  28. Mar 10, 2026 at 10:44 AM
    Tooly

    Tooly New Member

    Joined:
    Mar 1, 2021
    Member:
    #20051
    Messages:
    532
    Okanagan, BC Canada
    Vehicle:
    2024 4Runner Off Road Solar Octane / 2024 GR Corolla Circuit
    Is this a rust belt thing?
     
  29. Mar 10, 2026 at 11:19 AM
    FatChance

    FatChance Calculated risk or forbidden fruit?

    Joined:
    Nov 30, 2024
    Member:
    #44253
    Messages:
    124
    Gender:
    Male
    Sedona
    Vehicle:
    2024 4Runner Limited
    You have more daylight now? Interesting. Here in Arizona we have the same amount of daylight as we had about a week ago... ;)
     
  30. Mar 10, 2026 at 11:25 AM
    Oscar

    Oscar New Member

    Joined:
    Mar 10, 2025
    Member:
    #45968
    Messages:
    328
    Arizona
    Vehicle:
    2022 Lime Rush TRD Pro
    Falken Wildpeak A/T4W 285/70/17 D2 Off-Road sliders Talon Garage skid plates AVS 322025 bug guard DD Audio doors & sub; Kicker amp interior LEDs
    Well.. I mean technically this week our daylight hours are longer...
    https://www.timeanddate.com/sun/@5434451

    upload_2026-3-10_11-24-48.png

    As of March 2026,there is no federal law in the U.S. ending daylight saving time (DST) for good, despite the Senate passing the Sunshine Protection Act in 2022. While many states support making DST permanent, the House has not passed it, and biannual clock changes remain in effect.
     
    acet7, photo8, Nick B and 8 others like this.

Products Discussed in

To Top