1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

What has made my 5th gen gear shifter super squeaky?

Discussion in '5th Gen 4Runners (2010-2024)' started by djwantke, May 16, 2023.

  1. May 16, 2023 at 1:19 PM
    #1
    djwantke

    djwantke [OP] New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    1,151
    Gender:
    Male
    First Name:
    Derek
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -K&N Engine Air Filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Wheel well hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity *new July/2023 - The Original Universal EZ Flares, 1" Bought, in the garage queue, Summer 2023: -Apex Overland 4runner KDSS recovery points -4th set of off road lights. EVERGEAR 1,350 lumens, 30w, 3-¾" round flood lights for roof rack scene lighting. Tieing to ditch lights dash switch -F1 smoked LED triangular chase light with lighting effects, rear roof rack mounted -POR15 rust proofing line-up, 3-step process -July/2023 - purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002. Installing myself Wanted - bolt on cat shields, Sumo Springs,
    My 5th gen gear shifter squeaks and squeals bad in both directions. Maybe started a year ago, bought new 2016. It's pretty annoying. Even more annoying my wife says it's my fault.
    Spray lube had no effect.
    Thanks for any guidance

    IMG_20230515_204030111.jpg
     
  2. May 16, 2023 at 2:16 PM
    #2
    Captain Spalding

    Captain Spalding Explorer

    Joined:
    Feb 4, 2022
    Member:
    #25492
    Messages:
    1,598
    Gender:
    Male
    Vehicle:
    ‘22 Army Green ORP
    RSG Sliders DrKDSS A-pillar Handle, GMRS Radio
    perhaps you’ve got some debris in there. Maybe take it apart and blow it out with some compressed air.
     
    Texrun50 likes this.
  3. May 16, 2023 at 2:34 PM
    #3
    Slopemaster

    Slopemaster Slope Survivalist

    Joined:
    Mar 20, 2021
    Member:
    #20442
    Messages:
    2,434
    Gender:
    Male
    Idaho
    Vehicle:
    2018 SR5
    265-70-17 Ridge Grapplers, TRD Pro rims, 3M precut bra, N-Fab nerf/steps
    Or spilled soda?
    Nothing will ruin an interior quicker than soda.
     
  4. May 16, 2023 at 7:08 PM
    #4
    djwantke

    djwantke [OP] New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    1,151
    Gender:
    Male
    First Name:
    Derek
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -K&N Engine Air Filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Wheel well hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity *new July/2023 - The Original Universal EZ Flares, 1" Bought, in the garage queue, Summer 2023: -Apex Overland 4runner KDSS recovery points -4th set of off road lights. EVERGEAR 1,350 lumens, 30w, 3-¾" round flood lights for roof rack scene lighting. Tieing to ditch lights dash switch -F1 smoked LED triangular chase light with lighting effects, rear roof rack mounted -POR15 rust proofing line-up, 3-step process -July/2023 - purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002. Installing myself Wanted - bolt on cat shields, Sumo Springs,
    There's certainly been little spills, probably coffee as well. Doesn't help it's the wife n babies weekday daily.
    YouTube knows all!
     
    Slopemaster likes this.
  5. May 16, 2023 at 7:21 PM
    #5
    EC15

    EC15 New Member

    Joined:
    May 10, 2022
    Member:
    #27013
    Messages:
    94
    Gender:
    Male
    Neutral safety switch is starting to go.
    It starts that way, then the gear indicator malfunction and dash lights will be next.
    Get underneath and start soaking it with penetrating fluid for the inevitable swap.
    Its on the passenger side of the transmission.


    https://youtu.be/R9FUgjwq1_o
     
  6. May 16, 2023 at 7:37 PM
    #6
    djwantke

    djwantke [OP] New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    1,151
    Gender:
    Male
    First Name:
    Derek
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -K&N Engine Air Filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Wheel well hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity *new July/2023 - The Original Universal EZ Flares, 1" Bought, in the garage queue, Summer 2023: -Apex Overland 4runner KDSS recovery points -4th set of off road lights. EVERGEAR 1,350 lumens, 30w, 3-¾" round flood lights for roof rack scene lighting. Tieing to ditch lights dash switch -F1 smoked LED triangular chase light with lighting effects, rear roof rack mounted -POR15 rust proofing line-up, 3-step process -July/2023 - purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002. Installing myself Wanted - bolt on cat shields, Sumo Springs,
  7. May 17, 2023 at 6:52 AM
    #7
    glwood54

    glwood54 Stop making me buy stuff!

    Joined:
    Aug 19, 2019
    Member:
    #10964
    Messages:
    4,823
    Gender:
    Male
    First Name:
    Gary
    Albuquerque, NM
    Vehicle:
    2019 OR, KDSS, RSG sliders, Eibach shocks, 265/70 Falken Wildpeaks
    With the needle bearing soon to follow...:eek:
     
  8. May 17, 2023 at 11:44 AM
    #8
    djwantke

    djwantke [OP] New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    1,151
    Gender:
    Male
    First Name:
    Derek
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -K&N Engine Air Filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Wheel well hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity *new July/2023 - The Original Universal EZ Flares, 1" Bought, in the garage queue, Summer 2023: -Apex Overland 4runner KDSS recovery points -4th set of off road lights. EVERGEAR 1,350 lumens, 30w, 3-¾" round flood lights for roof rack scene lighting. Tieing to ditch lights dash switch -F1 smoked LED triangular chase light with lighting effects, rear roof rack mounted -POR15 rust proofing line-up, 3-step process -July/2023 - purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002. Installing myself Wanted - bolt on cat shields, Sumo Springs,
  9. May 17, 2023 at 11:45 AM
    #9
    djwantke

    djwantke [OP] New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    1,151
    Gender:
    Male
    First Name:
    Derek
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -K&N Engine Air Filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Wheel well hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity *new July/2023 - The Original Universal EZ Flares, 1" Bought, in the garage queue, Summer 2023: -Apex Overland 4runner KDSS recovery points -4th set of off road lights. EVERGEAR 1,350 lumens, 30w, 3-¾" round flood lights for roof rack scene lighting. Tieing to ditch lights dash switch -F1 smoked LED triangular chase light with lighting effects, rear roof rack mounted -POR15 rust proofing line-up, 3-step process -July/2023 - purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002. Installing myself Wanted - bolt on cat shields, Sumo Springs,
    @EC15 thank-you very much; penetrating fluid as in a lubricant?
     
  10. May 17, 2023 at 12:24 PM
    #10
    MartianArmada

    MartianArmada New Member

    Joined:
    Dec 19, 2022
    Member:
    #30147
    Messages:
    105
    Gender:
    Male
    First Name:
    Alex
    Harford County, MD
    Vehicle:
    2021 Venture
    Wildpeaks
    Penetrants are basically a lubricant that creep very well.

    If you don't have any, order a can of Kroil and spray a bit on every bolt you remove. I sprayed a bit on a ~120k mile turbo manifold on my Mazda a few times over the course of a couple days and was able to remove the turbo and manifold without snapping any studs - and was able to reuse all hardware.
     
  11. May 17, 2023 at 12:29 PM
    #11
    glwood54

    glwood54 Stop making me buy stuff!

    Joined:
    Aug 19, 2019
    Member:
    #10964
    Messages:
    4,823
    Gender:
    Male
    First Name:
    Gary
    Albuquerque, NM
    Vehicle:
    2019 OR, KDSS, RSG sliders, Eibach shocks, 265/70 Falken Wildpeaks
    Sorry, lousy joke. What @EC15 posted seemed completely unrelated to what you were asking about, so I threw something else also in to the mix...please ignore.
     
  12. May 17, 2023 at 12:58 PM
    #12
    EC15

    EC15 New Member

    Joined:
    May 10, 2022
    Member:
    #27013
    Messages:
    94
    Gender:
    Male
    Refer to what @MartianArmada said.
    Penetrating fluid like Kroil or PB Blaster can help.
    The NSS gets rusted to the shaft and can be a bitch to take out.

    Unrelated?
     
  13. May 17, 2023 at 1:51 PM
    #13
    djwantke

    djwantke [OP] New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    1,151
    Gender:
    Male
    First Name:
    Derek
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -K&N Engine Air Filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Wheel well hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity *new July/2023 - The Original Universal EZ Flares, 1" Bought, in the garage queue, Summer 2023: -Apex Overland 4runner KDSS recovery points -4th set of off road lights. EVERGEAR 1,350 lumens, 30w, 3-¾" round flood lights for roof rack scene lighting. Tieing to ditch lights dash switch -F1 smoked LED triangular chase light with lighting effects, rear roof rack mounted -POR15 rust proofing line-up, 3-step process -July/2023 - purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002. Installing myself Wanted - bolt on cat shields, Sumo Springs,
    I have the b'laster penetrating catalyst, it would be perfect no?

    download (3).jpg
     
  14. May 17, 2023 at 1:58 PM
    #14
    AuSeeker

    AuSeeker New Member

    Joined:
    Aug 4, 2018
    Member:
    #6604
    Messages:
    2,507
    Gender:
    Male
    If the squeak is coming directly from the shifter/console area I doubt it's a Neutral Safety Switch causing the noise, if the squeak seems to be coming from deep under the shifter/floor and more on the passenger's side then maybe it could the the switch.

    That being said it certainly wouldn't hurt to spray a little lube on the switch.
     
    djwantke[OP] likes this.
  15. May 17, 2023 at 2:55 PM
    #15
    EC15

    EC15 New Member

    Joined:
    May 10, 2022
    Member:
    #27013
    Messages:
    94
    Gender:
    Male
    That's it.
    Keep in mind, it is not intended to make your shifter feel better. It's mainly to aid with removing the old NSS.
     
  16. May 17, 2023 at 3:06 PM
    #16
    EC15

    EC15 New Member

    Joined:
    May 10, 2022
    Member:
    #27013
    Messages:
    94
    Gender:
    Male

    The squeaks do sound like it's coming from the shifter/console and the shifter feels gummed up but that's to Toyotas credit for making the linkages so smooth where a switch on the passenger side of the transmission feels like it's right there.

    Same symptoms OP described happen on my last 5th gen
     
    NOS4A2-1 and AuSeeker[QUOTED] like this.
  17. May 17, 2023 at 4:18 PM
    #17
    Captain Spalding

    Captain Spalding Explorer

    Joined:
    Feb 4, 2022
    Member:
    #25492
    Messages:
    1,598
    Gender:
    Male
    Vehicle:
    ‘22 Army Green ORP
    RSG Sliders DrKDSS A-pillar Handle, GMRS Radio
    As a young man when I was introduced to the concept of penetrating oil I ignored the part about applying it several times over the course of a couple of days, but that part is really important. Patience is key. Something I lacked as a young man. ;-)
     
  18. May 17, 2023 at 8:17 PM
    #18
    MartianArmada

    MartianArmada New Member

    Joined:
    Dec 19, 2022
    Member:
    #30147
    Messages:
    105
    Gender:
    Male
    First Name:
    Alex
    Harford County, MD
    Vehicle:
    2021 Venture
    Wildpeaks
    Nowadays I usually hit any bolt/nut on a car I'm about to remove to just avoid any risks of breakage or struggle.
     
    djwantke[OP] likes this.
  19. May 17, 2023 at 9:32 PM
    #19
    djwantke

    djwantke [OP] New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    1,151
    Gender:
    Male
    First Name:
    Derek
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -K&N Engine Air Filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Wheel well hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity *new July/2023 - The Original Universal EZ Flares, 1" Bought, in the garage queue, Summer 2023: -Apex Overland 4runner KDSS recovery points -4th set of off road lights. EVERGEAR 1,350 lumens, 30w, 3-¾" round flood lights for roof rack scene lighting. Tieing to ditch lights dash switch -F1 smoked LED triangular chase light with lighting effects, rear roof rack mounted -POR15 rust proofing line-up, 3-step process -July/2023 - purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002. Installing myself Wanted - bolt on cat shields, Sumo Springs,
    @Captain Spalding @MartianArmada wise advice, love that. It's like you could predict I definitely did not re-apply multiple times over multiple days, before deeming lube not working
     
  20. May 17, 2023 at 9:37 PM
    #20
    djwantke

    djwantke [OP] New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    1,151
    Gender:
    Male
    First Name:
    Derek
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -K&N Engine Air Filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Wheel well hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity *new July/2023 - The Original Universal EZ Flares, 1" Bought, in the garage queue, Summer 2023: -Apex Overland 4runner KDSS recovery points -4th set of off road lights. EVERGEAR 1,350 lumens, 30w, 3-¾" round flood lights for roof rack scene lighting. Tieing to ditch lights dash switch -F1 smoked LED triangular chase light with lighting effects, rear roof rack mounted -POR15 rust proofing line-up, 3-step process -July/2023 - purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002. Installing myself Wanted - bolt on cat shields, Sumo Springs,
    @EC15 thank you!
    Do ya'll know if I can post short smart phone videos on here? To hear the sound
     
  21. May 18, 2023 at 8:26 AM
    #21
    MartianArmada

    MartianArmada New Member

    Joined:
    Dec 19, 2022
    Member:
    #30147
    Messages:
    105
    Gender:
    Male
    First Name:
    Alex
    Harford County, MD
    Vehicle:
    2021 Venture
    Wildpeaks
    It might be easiest to upload to YouTube as an unlisted video and share the link here.
     
    djwantke[QUOTED][OP] likes this.
  22. May 18, 2023 at 6:26 PM
    #22
    NOS4A2-1

    NOS4A2-1 New Member

    Joined:
    Jul 23, 2020
    Member:
    #15686
    Messages:
    176
    Gender:
    Male
    NY
    Vehicle:
    2020 Venture
    My gear shift has recently started squeaking when shifting in and out of park . It kind of sounds like a mouse, and it definitely sounds like it’s coming from the console area. Did your sound start like this also?
    A few months back I was getting a hard shift and I sprayed some lubricant on the linkage on the drivers side and on the neutral safety switch (passenger side) and that solved the problem, smooth as butter. But I don’t think this squeaking sound is coming from underneath the vehicle.
     
    djwantke[QUOTED][OP] likes this.
  23. May 18, 2023 at 7:23 PM
    #23
    djwantke

    djwantke [OP] New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    1,151
    Gender:
    Male
    First Name:
    Derek
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -K&N Engine Air Filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Wheel well hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity *new July/2023 - The Original Universal EZ Flares, 1" Bought, in the garage queue, Summer 2023: -Apex Overland 4runner KDSS recovery points -4th set of off road lights. EVERGEAR 1,350 lumens, 30w, 3-¾" round flood lights for roof rack scene lighting. Tieing to ditch lights dash switch -F1 smoked LED triangular chase light with lighting effects, rear roof rack mounted -POR15 rust proofing line-up, 3-step process -July/2023 - purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002. Installing myself Wanted - bolt on cat shields, Sumo Springs,
    Mine sounds like a mouse just like that, yes.
    I mean my sound didn't 'start like this', it just is this; a squeaky shifter. So you're saying you solved the hard shift but your squeak is new?
     
  24. May 18, 2023 at 8:32 PM
    #24
    NOS4A2-1

    NOS4A2-1 New Member

    Joined:
    Jul 23, 2020
    Member:
    #15686
    Messages:
    176
    Gender:
    Male
    NY
    Vehicle:
    2020 Venture
    Exactly, I solved the hard shifting several months ago and all was good. The squeaking started a few weeks ago. I think I’ll get under the truck and give everything a good spray again and see if that has any effect on the squeaking. If not I’ll have to open the console and check it out. I mean it really does sound like it’s coming from the console, but maybe not.
     
  25. May 18, 2023 at 8:47 PM
    #25
    djwantke

    djwantke [OP] New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    1,151
    Gender:
    Male
    First Name:
    Derek
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -K&N Engine Air Filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Wheel well hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity *new July/2023 - The Original Universal EZ Flares, 1" Bought, in the garage queue, Summer 2023: -Apex Overland 4runner KDSS recovery points -4th set of off road lights. EVERGEAR 1,350 lumens, 30w, 3-¾" round flood lights for roof rack scene lighting. Tieing to ditch lights dash switch -F1 smoked LED triangular chase light with lighting effects, rear roof rack mounted -POR15 rust proofing line-up, 3-step process -July/2023 - purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002. Installing myself Wanted - bolt on cat shields, Sumo Springs,
    Ah I hear ya, thank-you. I must take apart the console and investigate, perhaps tnite. It's bloody hot out haha
     
  26. May 18, 2023 at 8:50 PM
    #26
    djwantke

    djwantke [OP] New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    1,151
    Gender:
    Male
    First Name:
    Derek
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -K&N Engine Air Filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Wheel well hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity *new July/2023 - The Original Universal EZ Flares, 1" Bought, in the garage queue, Summer 2023: -Apex Overland 4runner KDSS recovery points -4th set of off road lights. EVERGEAR 1,350 lumens, 30w, 3-¾" round flood lights for roof rack scene lighting. Tieing to ditch lights dash switch -F1 smoked LED triangular chase light with lighting effects, rear roof rack mounted -POR15 rust proofing line-up, 3-step process -July/2023 - purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002. Installing myself Wanted - bolt on cat shields, Sumo Springs,
    I'll have to YouTube what exactly I'm looking for :cheers:
     
  27. May 20, 2023 at 5:56 PM
    #27
    djwantke

    djwantke [OP] New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    1,151
    Gender:
    Male
    First Name:
    Derek
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -K&N Engine Air Filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Wheel well hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity *new July/2023 - The Original Universal EZ Flares, 1" Bought, in the garage queue, Summer 2023: -Apex Overland 4runner KDSS recovery points -4th set of off road lights. EVERGEAR 1,350 lumens, 30w, 3-¾" round flood lights for roof rack scene lighting. Tieing to ditch lights dash switch -F1 smoked LED triangular chase light with lighting effects, rear roof rack mounted -POR15 rust proofing line-up, 3-step process -July/2023 - purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002. Installing myself Wanted - bolt on cat shields, Sumo Springs,
  28. May 20, 2023 at 6:16 PM
    #28
    NOS4A2-1

    NOS4A2-1 New Member

    Joined:
    Jul 23, 2020
    Member:
    #15686
    Messages:
    176
    Gender:
    Male
    NY
    Vehicle:
    2020 Venture
  29. May 21, 2023 at 6:55 AM
    #29
    EC15

    EC15 New Member

    Joined:
    May 10, 2022
    Member:
    #27013
    Messages:
    94
    Gender:
    Male
    Sounds like what happened to mine.
    Looks like the shifter is not as smooth either right?
     
  30. May 21, 2023 at 8:34 AM
    #30
    djwantke

    djwantke [OP] New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    1,151
    Gender:
    Male
    First Name:
    Derek
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -K&N Engine Air Filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Wheel well hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity *new July/2023 - The Original Universal EZ Flares, 1" Bought, in the garage queue, Summer 2023: -Apex Overland 4runner KDSS recovery points -4th set of off road lights. EVERGEAR 1,350 lumens, 30w, 3-¾" round flood lights for roof rack scene lighting. Tieing to ditch lights dash switch -F1 smoked LED triangular chase light with lighting effects, rear roof rack mounted -POR15 rust proofing line-up, 3-step process -July/2023 - purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002. Installing myself Wanted - bolt on cat shields, Sumo Springs,
    Shifter seems the same, I haven't noticed it necessarily less smooth. Just squeaks, and the noise sounds close by. But like ya'll have said, could be deceiving, and could be irrelevant where it sounds like it's coming from and I indeed do have bigger problem... Or it's a 7 year old Runner with a console I've never cleaned or lubed :D
     

Products Discussed in

To Top