1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Turn signal assembly replacement

Discussion in '1st Gen 4Runners (1984-1989)' started by EP4R, Apr 27, 2022.

  1. Apr 27, 2022 at 10:40 AM
    #1
    EP4R

    #1
    EP4R [OP] New Member

    Joined:
    Apr 22, 2021
    Member:
    #21088
    Messages:
    3
    Gender:
    Male
    First Name:
    Dino
    Vehicle:
    1988 Gray 4Runner
    header, upgraded intake
    Folks:
    I need to replace the turn signal assembly in my 1988 4Runner. It's the assembly that has turn signals on one end and the cruise control and wipers the other end. I'm replacing it because the cruise control button broke off.
    I have such an assembly, but the part numbers don't match the part numbers for the assembly for an '88. It must be from another year. Are the parts interchangeable from one year to another?
    There are subtle cosmetic differences among the years, but are there electronic differences? Can I install the assembly I have and expect for it to work properly, or just be safe and get that year's part?
    Any help would be appreciated.
    Thanks.
     
    EP4R, Apr 27, 2022
    #1
  2. Apr 28, 2022 at 6:38 AM
    #2
    se7enine

    #2
    se7enine New Member

    Joined:
    Dec 11, 2019
    Member:
    #12287
    Messages:
    132
    Gender:
    Male
    Vehicle:
    1984 4Runner
    3RZ
    I thought the cruise control was just a button on the dash?
    [​IMG]
     
    se7enine, Apr 28, 2022
    #2
  3. Apr 28, 2022 at 11:05 AM
    #3
    PhantomTweak

    #3
    PhantomTweak New Member

    Joined:
    Dec 20, 2019
    Member:
    #12402
    Messages:
    1,206
    Gender:
    Male
    First Name:
    Patrick
    OREGON
    Vehicle:
    1999 4Runner, bone stock
    None. Bone Stock. EXCEPT: Brushguard, tow hitch, both welded to the frame. It's good to have friends and a fully equipped garage!
    It depends on the year, model, and so forth.

    It's entirely possible the switch and other controls are mounted on te turn signal stalk.

    Pat☺
     
    PhantomTweak, Apr 28, 2022
    #3
Register FREE to Reply!
To Top