Suspension Compatibility - 21 Venture to 22 TRD OR

Does anyone know if the stock suspension (front coilovers, rear springs, rear shocks) from a 2021 Venture are the same (or compatible) with a 2022 TRD OR?

 

If both have KDSS you should have no problems like lean.

If Venture has no KDSS you can install that to any 5th gen 4runner without KDSS. From SR5 to TRD Pro to Limited. KDSS suspension to a non KDSS could potentially cause leaning issues.

But curious, suspension like Bilstien5100 are pretty cheap. Why try to put used factory suspension?

 

All 4runners (besides the limited xreas, and trd pro fox ) share the same shocks and springs.

If your looking for a oem upgrade the only upgrade would be trd pro fox shocks. But unless you get them dirt cheap. I look into aftermarket shocks.

 

Got a full set of stock suspension(coilovers, rear shocks, rear coils, UCAs) from a nice guy for $90. Only 15k miles on them. Didn’t like the 3” lifted springs w/ stock shocks that came with my used 4runner. So putting it back to stock while I save up for a proper 2” lift.

 

^Stock front spring rate is too soft and will sag in less than a year. Not worth the trouble. Just drive it as-is until you install your 2" lift.