1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Rear Coil Options

Discussion in '3rd Gen 4Runners (1996-2002)' started by kkvf24, Jul 18, 2022.

  1. Jul 18, 2022 at 11:35 AM
    #1
    kkvf24

    kkvf24 [OP] New Member

    Joined:
    May 16, 2022
    Member:
    #27082
    Messages:
    15
    Gender:
    Male
    First Name:
    Kurt
    Vehicle:
    2001 4runner SR%
    Hey All -

    I replaced my front struts/coils with Detroit Axle and rear struts as well. Currently my rear is still saggy - about 1" less than front. Front - ground to fender is sitting at about 34.75". Rear is about 33.5". Should I want the rear up to the same height - should I replace with the 99' tall rear coil springs or with 2001 coil springs - I'm going OEM springs, not looking to lift - just want it even. I guess I was hoping replacing the coils would give it that extra lift in the back but I don't know which ones to get.

    My tires are 30" on 15" stock wheels.

    What are your thoughts?
     
  2. Jul 18, 2022 at 12:55 PM
    #2
    SR5 Limited

    SR5 Limited New Member

    Joined:
    Sep 18, 2018
    Member:
    #7180
    Messages:
    12,304
    Vehicle:
    1996 SR5 Limited
    So 15 inch wheels will clear a third gen’s brakes?
    The steel rims?
     
  3. Jul 18, 2022 at 12:56 PM
    #3
    kkvf24

    kkvf24 [OP] New Member

    Joined:
    May 16, 2022
    Member:
    #27082
    Messages:
    15
    Gender:
    Male
    First Name:
    Kurt
    Vehicle:
    2001 4runner SR%
    These are stock 15”wheels with 30” tires on them. Alloy not steel and clear just fine.
     
    SR5 Limited likes this.
  4. Jul 18, 2022 at 12:56 PM
    #4
    SR5 Limited

    SR5 Limited New Member

    Joined:
    Sep 18, 2018
    Member:
    #7180
    Messages:
    12,304
    Vehicle:
    1996 SR5 Limited
    They have those pucks to raise the rear little?
     
  5. Jul 18, 2022 at 1:01 PM
    #5
    kkvf24

    kkvf24 [OP] New Member

    Joined:
    May 16, 2022
    Member:
    #27082
    Messages:
    15
    Gender:
    Male
    First Name:
    Kurt
    Vehicle:
    2001 4runner SR%
    Not sure what you mean. My rear is sagging and Im going to replace springs now as the struts alone didn’t help. Im trying to figure out if the 99 springs would be better or just go with the OEM height for 2001 year.
     
  6. Jul 18, 2022 at 1:24 PM
    #6
    kmeeg

    kmeeg LionRunner

    Joined:
    Apr 18, 2018
    Member:
    #5853
    Messages:
    4,681
    Gender:
    Male
    I have these in CO which I would like to sell with local pickup. Looks like they fit 2003 and up 4Runners and you may be not local to CO. May not fit your 2001 I guess.

    upload_2022-7-18_14-21-59.jpg
     
  7. Jul 18, 2022 at 9:45 PM
    #7
    Kwikvette

    Kwikvette Kwik Fab

    Joined:
    Jun 25, 2020
    Member:
    #15120
    Messages:
    839
    Gender:
    Male
    559
    Vehicle:
    Multiple
    4Runners do not use struts, neither front or back.

    They also have nothing to do with supporting weight; coils do that.

    If you're carrying some extra weight, go for '99 coils otherwise go for OEM coils for your model year.

    Easy stuff.
     
  8. Jul 19, 2022 at 7:00 AM
    #8
    kkvf24

    kkvf24 [OP] New Member

    Joined:
    May 16, 2022
    Member:
    #27082
    Messages:
    15
    Gender:
    Male
    First Name:
    Kurt
    Vehicle:
    2001 4runner SR%
    gotcha - thanks! I said struts - I meant shocks. I will replace with the OEM rears - thanks!
     
    Kwikvette[QUOTED] likes this.

Products Discussed in

To Top