1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Pedal Commander potential issues

Discussion in '5th Gen 4Runners (2010-2024)' started by IggyLites, Jul 20, 2020.

  1. Jul 20, 2020 at 10:33 AM
    #1
    IggyLites

    IggyLites [OP] New Member

    Joined:
    Jul 3, 2020
    Member:
    #15296
    Messages:
    18
    Gender:
    Male
    First Name:
    Ignacio
    Vehicle:
    2016 4Runner Limited
    Alpine Halo9
    Hola;

    I’m considering getting one of these doodads, but I have seen a few posts about Check Engine lights popping on on some cases.
    Does anyone have experience with this and can tell me if this is an existing problem, if there is a fix, etc?
    I’m ok disconnecting it and driving around to clear the codes, but I’m worried about my wife having this happen on a drive by herself.
    Thanks!
     
  2. Jul 20, 2020 at 5:54 PM
    #2
    Doglover2003

    Doglover2003 New Member

    Joined:
    Sep 12, 2016
    Member:
    #2655
    Messages:
    445
    Gender:
    Male
    First Name:
    Nick
    SoCal
    Vehicle:
    '18 ORP w/KDSS
    If the connectors are not fully seated and you don't hear it click in, it cause the CEL to goes off and you go into limp mode. That's my experience with the Pedal Commander. It happen once. No issues after that.
     
    IggyLites[OP] likes this.
  3. Jul 20, 2020 at 6:24 PM
    #3
    IggyLites

    IggyLites [OP] New Member

    Joined:
    Jul 3, 2020
    Member:
    #15296
    Messages:
    18
    Gender:
    Male
    First Name:
    Ignacio
    Vehicle:
    2016 4Runner Limited
    Alpine Halo9
    Doglover2003 likes this.
  4. Jul 20, 2020 at 7:32 PM
    #4
    Doglover2003

    Doglover2003 New Member

    Joined:
    Sep 12, 2016
    Member:
    #2655
    Messages:
    445
    Gender:
    Male
    First Name:
    Nick
    SoCal
    Vehicle:
    '18 ORP w/KDSS
    No problem :thumbsup:
     
  5. Jul 20, 2020 at 8:16 PM
    #5
    IggyLites

    IggyLites [OP] New Member

    Joined:
    Jul 3, 2020
    Member:
    #15296
    Messages:
    18
    Gender:
    Male
    First Name:
    Ignacio
    Vehicle:
    2016 4Runner Limited
    Alpine Halo9
    Actually, could you show me the cable path and location you picked for it? I ordered one and running cables behind a panel is still new to me
     

Products Discussed in

To Top