No throttle after passenger side collision

I have no throttle response after a passenger side collision. Showing codes P2123 and P2127 I believe also camshaft ps code and crankshaft ps code. Replaced throttle and accelerator pedal. Still nothing. Any help greatly appreciated.. computer? Wiring?

 

Check your wiring under your airbox...

 

Brother I certainly appreciate your reply I have replaced the throttle body and replace the accelerator pedal I will check the wiring under the airbox again and since then I have replaced the computer but stupid me won't stay crank without the key registration however same throttle codes were there tried to clear them but came back. I noticed some leaking in the passenger side possibly from the accident of course in the floorboard passenger side. I'm going to put the old computer back in and start trying to trace the wiring if I can find a diagram and go from there any more thoughts would be greatly appreciated.

 

I'm sure you've likely sorted this, but have you check the fuse for the throttle body (ETCS fuse)? I had something similar happen where the car would idle, but there was no throttle response. Turns out the fuse was blown.