Measurements for stock

Hello all, new to this forum coming from a 3rd gen taco, now own a 4th gen 4Runner. If anyone could help me out on some measurements from center of hub to the top of fender for front a rear on a stock 4th gen v6 4wd. Just trying to get a basic idea of starting and ending point as I picked this 4Runner up used and it has a spacer lift and 5100s and not sure how far it’s lifted. I’m going to install 6112 and 5160s. I’m not getting definite answer on the clip placement. I see everything but a v6 4wd. I read on Amazon comment a guy placed it on 10/8 for 2.5 in. Then I saw another listing to place it on 5/3. My goal is to get 2.5in in the front. Thank you,

 

Whatever additional height more than stock at the strut assembly, multiply by 2.2. Each groove above stock on the 5100 adds 0.39" (10 mm) plus whatever spacer height. 1" of lift at the strut adds about 2.2" of lift at the wheel.