1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Leveling question?

Discussion in '3rd Gen 4Runners (1996-2002)' started by SR5 Limited, Sep 8, 2019.

  1. Sep 8, 2019 at 11:37 AM
    #1
    SR5 Limited

    SR5 Limited [OP] New Member

    Joined:
    Sep 18, 2018
    Member:
    #7180
    Messages:
    12,327
    Vehicle:
    1996 SR5 Limited
    OK peeps, I know you have noticed my rear end sagging? So, what’s the easiest way to raise an inch or two. Cheapest too. Like a spacer or something? 0C601400-430B-4866-9585-7904369E971F.jpg
     
  2. Sep 8, 2019 at 11:39 AM
    #2
    SlvrSlug

    SlvrSlug Slightly bent.

    Joined:
    Jun 3, 2018
    Member:
    #6172
    Messages:
    7,611
    Gender:
    Male
    First Name:
    John
    Ramona Ca.
    Vehicle:
    2017 4-Runner SR-5 P. Kings, Built Right uca’s, Durabumps, RSG sliders
    You could probably do spacers, but i would go with springs, thats my h.o.
     
  3. Sep 8, 2019 at 11:43 AM
    #3
    SR5 Limited

    SR5 Limited [OP] New Member

    Joined:
    Sep 18, 2018
    Member:
    #7180
    Messages:
    12,327
    Vehicle:
    1996 SR5 Limited
    Well I did have my rear springs replaced under a recall. I only want like an inch and don’t want to change the ergonomics of the suspension because I tow a boat....
     
  4. Sep 8, 2019 at 11:45 AM
    #4
    4scooter19

    4scooter19 New Member

    Joined:
    Feb 23, 2019
    Member:
    #8920
    Messages:
    1,323
    Gender:
    Male
    Oregon
    Vehicle:
    98 and 86 4Runners
    If you tow a boat I would add some airbags.
     
  5. Sep 8, 2019 at 12:17 PM
    #5
    SR5 Limited

    SR5 Limited [OP] New Member

    Joined:
    Sep 18, 2018
    Member:
    #7180
    Messages:
    12,327
    Vehicle:
    1996 SR5 Limited
    I only need an inch. So I’m getting aluminum 1.5 inch spacers for fiftey bucks.....
     

Products Discussed in

To Top