1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Glove box part #

Discussion in '4th Gen 4Runners (2003-2009)' started by 4runningMan, Jan 17, 2019.

  1. Jan 17, 2019 at 4:11 PM
    #1
    4runningMan

    4runningMan [OP] New Member

    Joined:
    Sep 23, 2018
    Member:
    #7255
    Messages:
    602
    I'm looking for the part number for this little piece that slows down the glove box door when opening. Instead of just dropping fast, the box opens slowly when you open it. It's almost like a little hydraulic cylinder.

    The parts diagram (below, #7) is labeled as a "lock stopper" (55054-35010). Can someone confirm that this is the correct part?

    433F9340-020F-4D29-A454-BC8485BD46B2.jpg 33349259-5393-4CD4-B95F-307DB8EAAB8B.jpg
     
  2. Feb 6, 2019 at 11:53 AM
    #2
    MP21

    MP21 New Member

    Joined:
    Feb 23, 2017
    Member:
    #3591
    Messages:
    25
    Gender:
    Male
    Vehicle:
    1998 T4R 4x4 V-6 & 2007 T4R 4x4 V-8
    98 T4R 2" lift 235/85r16 Hankook Dynapro M/T 07 T4R 3" RevTech Lift with Bilstein 5100 front and rear 255/70R18 BFG A/T Ko2
    That part number fits 03-09 4runners and other models.
     
  3. Feb 6, 2019 at 8:07 PM
    #3
    4runningMan

    4runningMan [OP] New Member

    Joined:
    Sep 23, 2018
    Member:
    #7255
    Messages:
    602
    I should have specified. Yep, it's a 2008. The picture in the schematic just didn't quite look the same so I wasn't sure. But that must be it.
     

Products Discussed in

To Top