1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Fender, bumper gap (again)

Discussion in '5th Gen 4Runners (2010-2024)' started by Xombie2000, Sep 21, 2021.

  1. Sep 21, 2021 at 1:12 PM
    #1
    Xombie2000

    Xombie2000 [OP] New Member

    Joined:
    Aug 29, 2021
    Member:
    #23069
    Messages:
    126
    Vehicle:
    2016 4RUNNER trail
    I’ve search a lot for an answer. Something hit my fog light housing pretty hard and I got “the gap”. I tried the Toyota solution with 3m “Velcro” tape and it didn’t work. Replaced the L shaped bracket under the headlight as well. Did anyone find a solution to this? I pulled the front bumper cover off and wasn’t sure exactly what I was looking for.

    A62F49CD-C911-4315-9FE5-E1165E8E3B23.jpg

    36D986C1-4E02-40F1-8116-A99D2B8F454E.jpg
     
    Last edited: Sep 21, 2021
  2. Sep 21, 2021 at 5:34 PM
    #2
    Daytonaviolet

    Daytonaviolet TRD Bro

    Joined:
    Mar 13, 2019
    Member:
    #9167
    Messages:
    1,639
    Gender:
    Male
    Bay Area, CA
    Vehicle:
    Blizzard Pearl TRD Bro
    When removing and reinstalling the bumper, align the square bumper guide into the square hole in the headlight L bracket.
    If this is not seated correctly, bumper gaps may occur.
     
    DrewMan and Xombie2000[OP] like this.
  3. Sep 21, 2021 at 5:47 PM
    #3
    Xombie2000

    Xombie2000 [OP] New Member

    Joined:
    Aug 29, 2021
    Member:
    #23069
    Messages:
    126
    Vehicle:
    2016 4RUNNER trail
    thanks for the tip. Maybe it was damaged. Is there a way to repair it?
     
  4. Sep 21, 2021 at 5:50 PM
    #4
    Daytonaviolet

    Daytonaviolet TRD Bro

    Joined:
    Mar 13, 2019
    Member:
    #9167
    Messages:
    1,639
    Gender:
    Male
    Bay Area, CA
    Vehicle:
    Blizzard Pearl TRD Bro
    Not sure about damage repair. Just make sure both bumper guides are seated al the way. This will take stress off the gap
     
  5. Sep 22, 2021 at 5:53 PM
    #5
    Xombie2000

    Xombie2000 [OP] New Member

    Joined:
    Aug 29, 2021
    Member:
    #23069
    Messages:
    126
    Vehicle:
    2016 4RUNNER trail
    What I found after disassembling it last night was the bracket is missing a tab. I couldn’t take a cleat picture but here is a new one.

    B5A5C5F8-8D55-4ADB-B410-469C4821B0FC.jpg
     
  6. Sep 22, 2021 at 6:03 PM
    #6
    Daytonaviolet

    Daytonaviolet TRD Bro

    Joined:
    Mar 13, 2019
    Member:
    #9167
    Messages:
    1,639
    Gender:
    Male
    Bay Area, CA
    Vehicle:
    Blizzard Pearl TRD Bro
    Which tab was missing
     
  7. Sep 22, 2021 at 6:17 PM
    #7
    Xombie2000

    Xombie2000 [OP] New Member

    Joined:
    Aug 29, 2021
    Member:
    #23069
    Messages:
    126
    Vehicle:
    2016 4RUNNER trail
    It’s under the passenger headlight where the square post goes into to headlight bracket. There is one on the drivers side is why I suspect this. Looks like a tab that would hold on to a slot.
     
  8. Sep 22, 2021 at 6:27 PM
    #8
    Daytonaviolet

    Daytonaviolet TRD Bro

    Joined:
    Mar 13, 2019
    Member:
    #9167
    Messages:
    1,639
    Gender:
    Male
    Bay Area, CA
    Vehicle:
    Blizzard Pearl TRD Bro
    I know those brackets are screwed down on the sides. But anything loose will effect the bumper
     
  9. Sep 22, 2021 at 6:33 PM
    #9
    Xombie2000

    Xombie2000 [OP] New Member

    Joined:
    Aug 29, 2021
    Member:
    #23069
    Messages:
    126
    Vehicle:
    2016 4RUNNER trail
    When I replaced the headlight(had moisture in it), I don’t recall noticing it there. I keep seeing people taking about replacing the retaining clips, which ones? I know there are some around the bumper in the wheel well attached to the bumper and splash guards.
     
    Last edited: Sep 22, 2021
  10. Sep 23, 2021 at 6:37 PM
    #10
    Xombie2000

    Xombie2000 [OP] New Member

    Joined:
    Aug 29, 2021
    Member:
    #23069
    Messages:
    126
    Vehicle:
    2016 4RUNNER trail
    The bumper retainer wasn’t tight. In fact it popped off, I think I got the two screws near the fender well reversed by the looks of it. It’s back together but I ordered another it’s not tight.
     
  11. Sep 24, 2021 at 5:13 AM
    #11
    Charlievee

    Charlievee New Member

    Joined:
    Dec 20, 2018
    Member:
    #8149
    Messages:
    1,288
    Part number?
     
  12. Sep 24, 2021 at 8:30 AM
    #12
    Xombie2000

    Xombie2000 [OP] New Member

    Joined:
    Aug 29, 2021
    Member:
    #23069
    Messages:
    126
    Vehicle:
    2016 4RUNNER trail
    137588-04170361
     
  13. Sep 24, 2021 at 8:46 AM
    #13
    Charlievee

    Charlievee New Member

    Joined:
    Dec 20, 2018
    Member:
    #8149
    Messages:
    1,288
    No results found for "137588-04170361"
     
  14. Sep 24, 2021 at 9:11 AM
    #14
    Xombie2000

    Xombie2000 [OP] New Member

    Joined:
    Aug 29, 2021
    Member:
    #23069
    Messages:
    126
    Vehicle:
    2016 4RUNNER trail
    This

    3FC1A245-1172-46BE-B2A7-6012334CF166.jpg
     
    Daytonaviolet likes this.
  15. Sep 24, 2021 at 9:31 AM
    #15
    Charlievee

    Charlievee New Member

    Joined:
    Dec 20, 2018
    Member:
    #8149
    Messages:
    1,288

Products Discussed in

To Top