1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Brand New 5th Gen Clunk

Discussion in '5th Gen 4Runners (2010-2024)' started by 8Runr, Jul 4, 2025 at 7:23 AM.

  1. Jul 4, 2025 at 7:23 AM
    #1
    8Runr

    8Runr [OP] New Member

    Joined:
    Yesterday
    Member:
    #47893
    Messages:
    1
    Hey guys,

    Bought a brand new fifth gen ORP w/ KDSS a few months back. Love the truck! However, when I first begin driving the car and go over my first bump (over a slightly raised sidewalk past my driveway) I feel and hear a distinct clunk underneath me. This is strange cause if I drive over it again, it won’t make the clunk. I can drive over it over and over after that point and it’ll rarely do it.

    I get the same thing at times if I make a sudden k-turn, when I cut the wheels and reverse after a forward acceleration. Again, it doesn’t do it every time, usually only once and then not again if I try to repeat the same action soon after. Sometimes it’ll also do it during a very hard brake. Truck has been doing it since new and still only has 5k miles. Dealer says can’t replicate.

    Both driveshafts are properly greased at all zerk fittings. I can feel the clunk underneath me in the driver seat and slightly through the steering wheel.

    Any thoughts??

    here is a video showing the clunk:
    https://limewire.com/d/ThhI7#WAsDI69xlj
     
    Last edited: Jul 4, 2025 at 7:29 AM
  2. Jul 4, 2025 at 8:29 AM
    #2
    JET4

    JET4 Old Member

    Joined:
    Dec 20, 2018
    Member:
    #8147
    Messages:
    5,887
    Gender:
    Male
    Southeast, Va.
  3. Jul 4, 2025 at 8:29 AM
    #3
    BS67

    BS67 8404 USMC Doc

    Joined:
    Jan 26, 2024
    Member:
    #38143
    Messages:
    9,729
    Gender:
    Male
    CC Ne
    Vehicle:
    2023 SR5 Premium
  4. Jul 4, 2025 at 8:37 AM
    #4
    Lc200

    Lc200 New Member

    Joined:
    Jun 16, 2023
    Member:
    #33430
    Messages:
    1,144
    Gender:
    Male
    Vehicle:
    Pre Facelift SR5P
    You could start with checking your skid plates and see if they are properly tight. Bang on them with your hand to see if it makes the same noise you hear.
    LCA bolts, sway bar links, basically cross check to see the suspension components are torqued to spec.
     
  5. Jul 4, 2025 at 8:49 AM
    #5
    BoiseG

    BoiseG New Member

    Joined:
    Mar 31, 2024
    Member:
    #39509
    Messages:
    157
    Gender:
    Male
    Vehicle:
    2024 ORP
    It sounds like your rear driveshaft is binding. Only suggestion I have is to get under there with a creeper and a flashlight and have a good look around. Look for any wear marks on metal, grab things and make sure they're tight. Are you still under factory warranty? Keep pressuring the dealer to figure it out.
     
    Saker likes this.

Products Discussed in

To Top