1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Bracket on driver side

Discussion in '5th Gen 4Runners (2010-2024)' started by imkincaid, Apr 6, 2025.

  1. Apr 6, 2025 at 8:33 PM
    #1
    imkincaid

    imkincaid [OP] New Member

    Joined:
    Apr 6, 2025
    Member:
    #46439
    Messages:
    1
    Gender:
    Male
    Vehicle:
    2023 4 Runner TRD Pro
    Just bought a used 2023 4Runner and noticed this strange bracket bolted to the two mounting bolts for the driver side seat. Does anyone know what this bracket is for? I've never seen a bracket like this before and have no idea what its for.

    20250406_201640.jpg
    20250406_201632.jpg
     
  2. Apr 6, 2025 at 9:15 PM
    #2
    andrewtheadventurer

    andrewtheadventurer New Member

    Joined:
    Oct 24, 2022
    Member:
    #29238
    Messages:
    120
    Fire extinguisher or really anything you may want. It’s aftermarket
     
    djwantke likes this.
  3. Apr 6, 2025 at 9:26 PM
    #3
    glwood54

    glwood54 Stop making me buy stuff!

    Joined:
    Aug 19, 2019
    Member:
    #10964
    Messages:
    7,098
    Gender:
    Male
    First Name:
    Gary
    Land of Enchantment
    Vehicle:
    2019 OR, KDSS, RSG sliders, Eibach shocks, 265/70 Falken Wildpeak AT4
    Might be a mounting bracket for a fire extinguisher. There's several versions of those.
     
    Captain Spalding likes this.
  4. Apr 6, 2025 at 9:29 PM
    #4
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    4,435
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Jan. 2024: custom installed 2lb fire extinguisher between drivers seat and door -Feb. 2024: swapped interior lighting to diode dynamics led’s -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting -Feb. 13/2024: double ditch lights, on new Rago Fabrication Extension brackets. -3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Existing: 3inch EVERGEAR clear lens LED pods -May 2024: custom black aluminum grille mesh installed in front of factory plastic -June 2024: custom built powder coated dom sliders -Nov. 2024: thermo-plastic rear mudflaps -Dec. 2024: rear bumper cover clearance cut, sprayed newly exposed parts black -Jan. 2025: trailer hitch removal, relocation of rear led pods to crossmember New: -Exhaust pipe chop after axle -March 2025: new SPC upper control arms, bushings, balljoints. Raised front end 0.75” via Bilstein 5100 spring seat. -April 2025: Evergear bezel-less cube ditch lights 4 LEDs 40W 3.33A 4800Lm 328’ beam distance 30° 6000k beam angle shatter & crack resistant lens -April 2025: Evergear Ultra Series light bar 27-3/4” flood spot combo 60 LEDs 60W 5A 6000Lm 1227’ beam distance Dual row, dual beam angle 30°/60° April 2025: BULLY Rock Crawler Hi-Intensity LED Utility Lights, Pair 1260 lumens @ 15w (3 x 5w CREE) each 120° flood beam waterproof, dustproof. Under hood: -Blue Fire 6-Circuit Fuse Block w/ LED Indicator & Protection Cover -Blue Sea 100A Circuit Breaker w/ reset lever In progress/in the garage queue: ~ Wanted - 80% OFFROAD Hitch Replacement Recovery Point, PerryParts or Wheelers bump stops, 1" body lift, custom dom front bumper, winch, rear dom bumper with side hoops, kdss angle correction, C or D load 35’s, bolt on cat shields
  5. Apr 7, 2025 at 5:09 AM
    #5
    JET4

    JET4 Old Member

    Joined:
    Dec 20, 2018
    Member:
    #8147
    Messages:
    5,165
    Gender:
    Male
    Southeast, Va.
    welcome
     
  6. Apr 7, 2025 at 5:26 AM
    #6
    RumHamRunner73

    RumHamRunner73 Dead on with a zero

    Joined:
    Nov 24, 2022
    Member:
    #29771
    Messages:
    3,285
    Gender:
    Male
    First Name:
    Philip
    Stanly County, N.C
    Vehicle:
    2022 4 Runner Limited. Blizzard Pearl
    Welcome to the forum from North Carolina.
     
  7. Apr 7, 2025 at 6:10 AM
    #7
    Charlievee

    Charlievee Not new member.

    Joined:
    Dec 20, 2018
    Member:
    #8149
    Messages:
    1,555
    Vehicle:
    2018 ORP
    Eibach stage 2, load lifter kit, Maggie w/ OTT tune... Other stuff.
    Looks like the Witts End fire extinguisher mount.

    20231014_134331_resized.jpg
     
    Captain Spalding likes this.
  8. Apr 7, 2025 at 6:24 AM
    #8
    BS67

    BS67 8404 USMC Doc

    Joined:
    Jan 26, 2024
    Member:
    #38143
    Messages:
    8,544
    Gender:
    Male
    CC Ne
    Vehicle:
    2023 SR5 Premium
    Welcome
     

Products Discussed in

To Top