Black paint polishing

Does anyone have experience with polishing black paint? My clearcoat has the typical oxidation, but the paint looks to be in great shape. I have a few orbital polishers and want to give it a shot. Tips and advice on what pads and products would be helpful.

 

I do on a Honda Accord. I did the following
1. Decontaminated the paint with Adam's Iron remover. I don't think it really did much but there were a few spots that turned purple indicating fallout. If you live near industrial areas or a railroad, definitely do this step.
2. Clay bar. Take your time and get all the junk out of the clearcoat. After doing this rhe paint will look better but will still have quite a bit of oxidation
3. Mechanical polish with a polishing compound with no fillers. I used another Adam's product here and an Adam's rotary polisher. You can use a buffer but results won't be as good. Make sure to do a small section ar a time and don't linger or you can burn the clearcoat. It's easier than it sounds. Lots of good videos on YouTube.
4. Wax, ceramic, graphene top coating of your choice. I used Adam's graphene.

Paint still looks great after 1.5 years. Really flattens out the clearcoat. You may want to use a water spot remover between steps 1 and 2 above if you have hard water mineral deposits in the clear.

 

Perfect instructions. All those steps are critical to a nice looking detail.