1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Anyone decide against Fumoto/Valvomax oil drain system?

Discussion in '5th Gen 4Runners (2010-2024)' started by legend1011, May 25, 2024.

  1. May 25, 2024 at 2:53 PM
    #1
    legend1011

    legend1011 [OP] New Member

    Joined:
    Apr 15, 2024
    Member:
    #39838
    Messages:
    195
    Gender:
    Male
    Vehicle:
    2024 White 4Runner TRD Offroad Premium (No KDSS)
    I've been on the fence about going with a Fumoto/Valvomax oil drain system on my new 2024 TRD ORP. I'm leaning more to the Valvomax because I'm a fan of the lower profile compared to the Fumoto and cap that will act a safe-guard against any failing seal it may have in the future.

    Pros:
    -Easier oil changes
    -Less chance for oil spills and messes
    -Less wear and tear on oil pan threads which could cause leaks (stripped threads)

    Cons:
    -Potential for a mechanic/ tech to not sure how to mess with it (I plan on doing my own oil changes so won't be an issue)
    -Slower flow-rate because of reduced hole size. Perhaps this won't get all of the sludge/dirt out?
    -Won't drain out all oil? It appears the threads on the Fumote/Valvomax will stay higher than the bottom of the oil pan. Could this also cause metal/wear fragments to not fully drain out at oil change time?
    -Corrosion by not removing plug from pan? I'm not sure how the brass/stainless steel will react with the oil pan long-term (especially that it isn't regularly being removed).

    I plan on keeping this truck as long as possible. I'd hate to introduce an issue that can be avoidable by sticking with the OEM plug. Especially since I'll most likely just be changing the oil 2x a year.

    I did buy the Motivx oil filter tool. Motivx oil filter drain tool, and Motivx funnel. I thought about buying the metal oil filter housing, but I am having similar concerns (if it's not broke, don't fix it). I am going to stick with Toyota OEM filter elements (04152-YZZA5)

    Thoughts?
     
  2. May 25, 2024 at 3:04 PM
    #2
    whippersnapper02

    whippersnapper02 New Member

    Joined:
    Feb 27, 2019
    Member:
    #8982
    Messages:
    3,036
    Gender:
    Male
    First Name:
    Christian
    Vehicle:
    2019 4Runner TRD Offroad Premium
    Toy4X4 likes this.
  3. May 25, 2024 at 4:52 PM
    #3
    kouack

    kouack New Member

    Joined:
    Mar 24, 2024
    Member:
    #39346
    Messages:
    16
    Gender:
    Male
    Vehicle:
    4Runner Limited 2024
    Bone stock
    I had a fumoto for 9 years on my subaru and 0 issue, sold the subaru for my brand new 4R. I just installed a fumoto on my 4R today.
     
    Toy4X4 and Bagman like this.
  4. May 25, 2024 at 5:08 PM
    #4
    rwturbo

    rwturbo New Member

    Joined:
    May 31, 2019
    Member:
    #10107
    Messages:
    25
    Gender:
    Male
    First Name:
    ronnie
    Vehicle:
    2006 4runner
    I am a mechanic and I see lots of vehicles with them and they all work well. They are nice for sure however I look at it as a way for someone to more quickly vandalize your vehicle. Easier access to draining some or all or your oil into a container. Yes the oil light would come on but so many people don’t even look at the dash. Just my thoughts.
     
  5. May 25, 2024 at 6:07 PM
    #5
    backpacker

    backpacker New Member

    Joined:
    Apr 22, 2023
    Member:
    #32515
    Messages:
    2,187
    Gender:
    Male
    Vehicle:
    2023 TRD ORP
    RSG sliders, Falken Wildpeak 265/70R/17 E
    That would be less easy with a Valvomax, unless they have the magic tube with them. In either case, they'd have to unbolt the cover, and they could just as well drain it from the standard bolt almost as fast.
     
    raimieb likes this.
  6. May 25, 2024 at 6:42 PM
    #6
    HuskyMike

    HuskyMike New Member

    Joined:
    Jan 23, 2023
    Member:
    #30835
    Messages:
    600
    San Diego
    Vehicle:
    2023 4Runner TRD Off Road Premium- Nautical Blue
    Just did my first oil change with the Valvomax. Very convenient way to drain, although I'm not sure it drained as completely as without the Valvomax. The oil on the dipstick was just brown enough to actually read it after re-filling the oil. Normally it's got that clear "new-oil-color" and you can hardly read it.

    I drilled a larger hole in my Flo-Tool drain pan. The hose from the Valvomax adapter fit right into the hole and the oil drained directly into the container. No more draining on the flat "pan" area first and then into the hole. Much easier clean up.
     
    steelevo likes this.
  7. May 25, 2024 at 8:03 PM
    #7
    icebear

    icebear Recovered Kia Owner

    Joined:
    Oct 10, 2023
    Member:
    #36091
    Messages:
    1,089
    Vehicle:
    2021 Toyota 4Runner SR5
    I wouldn’t be concerned much with bits at the bottom since it’ll likely be suspended in oil already or in the filter.

    Reduced flow rate is real but being able to tube the oil directly into a container with much reduced spill-risk is a big plus.

    Not worried about vandalism in my application since they’d still need to unbolt the door on the skid and it’s easy to do either way.

    I haven’t done it personally to my 4Runner but I’ve equipped my SO’s Honda. Biggest obstacle for me is just the cost of buying.
     
    Last edited: May 25, 2024
    scottiezilla and Toy4X4 like this.
  8. May 25, 2024 at 8:04 PM
    #8
    Slopemaster

    Slopemaster Slope Survivalist

    Joined:
    Mar 20, 2021
    Member:
    #20442
    Messages:
    3,093
    Gender:
    Male
    Idaho
    Vehicle:
    2018 SR5
    265-70-17 Ridge Grapplers, TRD Pro rims, 3M precut bra, N-Fab nerf/steps
    Yes
     
    glwood54 likes this.
  9. May 25, 2024 at 9:44 PM
    #9
    glwood54

    glwood54 Stop making me buy stuff!

    Joined:
    Aug 19, 2019
    Member:
    #10964
    Messages:
    6,699
    Gender:
    Male
    First Name:
    Gary
    Albuquerque, NM
    Vehicle:
    2019 OR, KDSS, RSG sliders, Eibach shocks, 265/70 Falken Wildpeak AT4
  10. May 26, 2024 at 4:24 AM
    #10
    Toy4X4

    Toy4X4 New Member

    Joined:
    Jul 18, 2020
    Member:
    #15580
    Messages:
    7,899
    Gender:
    Male
    First Name:
    Jeff
    Vehicle:
    2020 Offroad Prem. 4-runner
    RevTek 3" front- 2" rear leveling, JBA uca's, LED interior lights, Cooper 275-70-17 AT3 LT
    Fumoto valves come as standard equipment on some of the excavators, dozers, etc. Some of these pieces of equipment have 20k + hrs of operating time. I do not know how many miles that could come out to be, but these pieces of equipment get alot more abuse and oil changes than our 4Runners. We have a Fumoto on our 4Runner, but have not ruled out trying different kinds of valves for draining oil, it's just that Fumoto was the valve I've seen the most and thought to try them. BTW, I've never seen a Fumoto go 'bad' on construction equipment.
     
    Last edited: May 27, 2024
    Bagman, icebear and BS67 like this.
  11. May 26, 2024 at 4:49 AM
    #11
    Spare Parts

    Spare Parts New Member

    Joined:
    May 13, 2020
    Member:
    #14274
    Messages:
    2,831
    Gender:
    Male
    Southern Maine
    Vehicle:
    22 LR ORP
    Sherpa Crestone. 4X Innovations Sliders
    Do I need to change the gas cap so no one vandalizes my runner by putting shit in the tank? If vandalism is a reason not to buy and install a tool to assist with oil changes, then I think there are bigger concerns.
     
    Toy4X4, Bagman and LCJ77 like this.
  12. May 26, 2024 at 5:01 AM
    #12
    kouack

    kouack New Member

    Joined:
    Mar 24, 2024
    Member:
    #39346
    Messages:
    16
    Gender:
    Male
    Vehicle:
    4Runner Limited 2024
    Bone stock
    To do extra miles with Toy4x4 comment, I use to work on Helicopters and on the engines, transmission, RGB and oil coolers we’re equipped with drain valves also! Never seen a single failure in 30 years! Obviously not fumoto for FAA reasons, but work exactly the same with an aviation price tag!
     
    Toy4X4 and Bagman like this.
  13. May 26, 2024 at 6:32 AM
    #13
    ljerr2

    ljerr2 New Member

    Joined:
    Jul 29, 2022
    Member:
    #28006
    Messages:
    79
    Gender:
    Male
    IOWA
    Vehicle:
    2023 T4R Pro
    I was curious about this, too and installed one on my Tacoma to check to see how much was left in the pan after draining with a ValvoMax. I installed the valve and then next oil change I drained it, then pulled the valve and let the remaining oil drain out. Wasn't a lot - I can't recall exactly how much but you won't get all of it off the bottom of the pan. I ended up just staying with an OE drain plug but my primary concern was likely unwarranted but has to do with torque on the valve upon installation. For the Fumoto valve, I couldn't get past the idea of tightening a brass valve into my steel pan. OE spec is like 30 lb/ft. Don't know what Fumoto is but maybe half that? ValvoMax was a little sketchy giving me the torque spec and what it would handle but would seem much more robust being stainless v. brass. I liked everything else about the ValvoMax product.
    My oil change setup now involves a bucket with filter media in the bottom to prevent splashing like this:
    https://www.amazon.com/Lisle-38750-Round-No-Splatter-Pad/dp/B0051ACYA8.
    Works great and only real opportunity for me to make a mess is upon initial removal of the drain plug.
     
  14. May 26, 2024 at 6:43 AM
    #14
    semprenissart

    semprenissart Mèfi

    Joined:
    Dec 22, 2021
    Member:
    #24758
    Messages:
    886
    Arizona
    Vehicle:
    2022 4Runner TRD Pro (MGM)
    Westcott Sliders. Gobi no rise
    Never had any issues changing the oil the normal way.

    would the fumoto valve risk doing some damages if a big hit against a rock pushes it into the oil pan?
     
    usfbulls likes this.
  15. May 26, 2024 at 8:18 AM
    #15
    Yamahamer

    Yamahamer New Member

    Joined:
    Feb 10, 2023
    Member:
    #31183
    Messages:
    210
    Gender:
    Male
    Nevada
    Vehicle:
    2022 4Runner Off Road
    I installed EZ drain (Fumoto clone) valves on two of my vehicles several years ago. Love them. Push a hose onto the drain nipple, turn on the valve and every drop of oil going down into a 5 gallon bucket. Not a drop spilled. I haven't installed one on the 4R yet...not sure if it's worth it, considering the silly cartridge oil filter setup. Don't know of any way to change that filter without at least a few drops of oil spilled.
     
  16. May 26, 2024 at 8:22 AM
    #16
    Kfish

    Kfish New Member

    Joined:
    Jun 30, 2020
    Member:
    #15244
    Messages:
    179
    Gender:
    Male
    Vehicle:
    2020 4Runner SR5
    I installed a Fumoto on the first oil change on my 2020 and not a single problem or leak. I've had Fumoto on previous car and my wife's Highlander as well. 4runner skid plate cover and protects the Fumoto with a circle opening big enough for easy oil drain.
     
  17. May 26, 2024 at 9:53 AM
    #17
    TRDSD

    TRDSD Warrior of the Wasteland

    Joined:
    May 6, 2022
    Member:
    #26967
    Messages:
    152
    San Diego
    Vehicle:
    2019 TRD Off Road Premium
    That's what a good skid plate is for.
     
    5thToy likes this.
  18. May 26, 2024 at 11:07 AM
    #18
    semprenissart

    semprenissart Mèfi

    Joined:
    Dec 22, 2021
    Member:
    #24758
    Messages:
    886
    Arizona
    Vehicle:
    2022 4Runner TRD Pro (MGM)
    Westcott Sliders. Gobi no rise
    Yes a decent aftermarket skid plate would solve this but the OEM small cover doesn’t protect much from a big hit
     
  19. May 26, 2024 at 1:31 PM
    #19
    TRDSD

    TRDSD Warrior of the Wasteland

    Joined:
    May 6, 2022
    Member:
    #26967
    Messages:
    152
    San Diego
    Vehicle:
    2019 TRD Off Road Premium
    Well, you shouldn't be playing in the rocks and risking "a big hit against a rock" in the first place with an OEM skid plate, right? If that's the case, you're better off keeping the drain bolt, too.
     
    Old Tanker likes this.
  20. May 27, 2024 at 9:33 AM
    #20
    legend1011

    legend1011 [OP] New Member

    Joined:
    Apr 15, 2024
    Member:
    #39838
    Messages:
    195
    Gender:
    Male
    Vehicle:
    2024 White 4Runner TRD Offroad Premium (No KDSS)
    This will be a good option for me for now. My wife and I have plenty of the oem Toyota crush washers already because I change the oil on her Lexus. I'm going to invest in a good torque wrench (considering buying the HF Icon torque wrench for these types of jobs). I have always done it by "feel", but want to be more official about this with the new truck.
     
  21. May 27, 2024 at 10:21 AM
    #21
    Tama1968

    Tama1968 New Member

    Joined:
    Jan 2, 2016
    Member:
    #1353
    Messages:
    715
    Gender:
    Male
    Florida
    Vehicle:
    T4R SR5 in Classic Silver
    I'm not militant pro or con on the Fumotos, but I've used them on almost all of our vehicles for 20+ years with no issues whatsoever. we had a couple Camry's where I was worried about clearance but no issues on the SUV's especially my 4Runner
     
    Toy4X4 likes this.
  22. May 27, 2024 at 12:33 PM
    #22
    AuSeeker

    AuSeeker Old As Dirt

    Joined:
    Aug 4, 2018
    Member:
    #6604
    Messages:
    9,334
    Gender:
    Male
    First Name:
    Skip
    South Carolina
    Vehicle:
    2004 Limited
    Unless you're getting the 3/8" drive the 1/2" drive Icon torque wrench doesn't go down low enough for the drain plug, it's minimum torque is 50 lbs. I believe the drain plug is way less than that, around 27 to 30 lbs I'm not mistaken.
     

Products Discussed in

To Top