ABS intermediate wire.

Some dorks who worked on my 2001 years ago draped the ABS intermediate (middle) wire over the exhaust and fried it.

I obtained another from ebay awhile back. My new mechanic says that on the left, driver side the wire splits and should have another plug in addition to the one which goes forward, eventually to the brake controller.

Anyone got a pic or part number for this item? Pic included of the "wrong" one. The top is the driver side.

 

Front or rear harness?

 

It's the middle rear. The heat shielded part plugs into the right speed sensor. Plastic wedges attach it to the axle, and about 2ft from the end theres a plug for the left side speed sensor. Then this one terminates to a 5pin white locking plug. I'm told there should be another line on this end and another plug. That this wire is wrong.

 

I think this is it?

I can't really tell...
82164-3D870

https://partsouq.com/en/catalog/gen...=$&vid=0&cid=4&uid=328673&q=JT3HN86R329070393

 

If it were me, I'd order it from my local dealer and if it comes in and is wrong, I'd just not buy it. I hate to do it to the parts guy but sometimes it happens that they don't have a good diagram of what you need.