1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

95 knock sensor replacement confusion

Discussion in '2nd Gen 4Runners (1990-1995)' started by Misnewrunner, Feb 12, 2025.

  1. Feb 12, 2025 at 11:48 AM
    #1
    Misnewrunner

    Misnewrunner [OP] New Member

    Joined:
    Feb 12, 2025
    Member:
    #45488
    Messages:
    1
    Gender:
    Female
    First Name:
    Melissa
    Vehicle:
    95 4runner 3.0l 4x4
    So I have a 95 with the 3vze. I have the knock sensor changed and I am putting everything back together. I labeled all the lines and hoses but am at a loss right now and could use some help. I can't figure out what or where the hose is for this port....
    Then in the other picture I dont know if I mislabeled something or if I'm missing something....I'm at a loss and hella frustrated. Does the tube that is disconnected to the left go into the bottom little port on the right?? Ahhh If anyone could help me that would be amazing. 20250212_114718.jpg 20250212_114625.jpg
     

Products Discussed in

To Top