1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

2006 4Runner Low Beam Not Working

Discussion in '4th Gen 4Runners (2003-2009)' started by CrazyCowPie, Nov 29, 2024 at 4:02 PM.

  1. Nov 29, 2024 at 4:02 PM
    #1
    CrazyCowPie

    #1
    CrazyCowPie [OP] New Member

    Joined:
    Friday
    Member:
    #44239
    Messages:
    1
    So, low beam was working fine..then one day, it would turn on and off as I on/off the light switch. Now, low beam not turning on at all. High beam works fine.

    I've replace the light switch stock, replace the relay at the fuse box. Check the relay at the bundle where it split to the far side. Replace new light bulbs. Check voltage at the connector to the light (has 12v as the switch turns on/off). Measured resistance Ground (black wire) wire and has 1 ohm

    Any help would be appreciated.

    thanks,
     
    CrazyCowPie, Nov 29, 2024 at 4:02 PM
    #1
Register FREE to Reply!
To Top