1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

What have you done to your 5th Gen 4Runner today?

Discussion in '5th Gen 4Runners (2010-2024)' started by Bob, Jul 24, 2016.

  1. Sep 11, 2025 at 9:22 AM
    Noveske8S6

    Noveske8S6 New Member

    Joined:
    Jul 12, 2025
    Member:
    #48012
    Messages:
    271
    Gender:
    Male
    VA
    Vehicle:
    2021 Nautical Blue TRD ORP
    Might be. My biggest issue is the letters don't work with the 40th Anniversary Bronze OEM overlays but the spray paint seems to have taken care of it well enough for my liking. $300 for just the part with the letters from Toyota is pretty crazy.
     
    This site contains affiliate links for which the site may be compensated.
    2016SR5P[QUOTED] likes this.
  2. Sep 11, 2025 at 9:25 AM
    2016SR5P

    2016SR5P New Member

    Joined:
    Aug 2, 2022
    Member:
    #28038
    Messages:
    225
    Gender:
    Male
    First Name:
    Jim
    Massachusetts
    Vehicle:
    2016 SR5P
    Absolutely agree. When I wash the car I like to spray the black cover piece with ceramic wax spray to keep it from fading in the sun. Mine looks like new still.
     
    Noveske8S6[QUOTED] likes this.
  3. Sep 11, 2025 at 2:38 PM
    Tooly

    Tooly New Member

    Joined:
    Mar 1, 2021
    Member:
    #20051
    Messages:
    482
    Okanagan, BC Canada
    Vehicle:
    2024 4Runner Off Road Solar Octane / 2024 GR Corolla Circuit
    I had the opposite experience. I originally had the Cartrimhome grill and the fit was crappy and the finish started peeing after a couple years. Bit the bullet for the OEM piece and the quality was much better.
     
    This site contains affiliate links for which the site may be compensated.
    2016SR5P[QUOTED] likes this.
  4. Sep 11, 2025 at 3:46 PM
    Charlievee

    Charlievee Not new member.

    Joined:
    Dec 20, 2018
    Member:
    #8149
    Messages:
    1,752
    Vehicle:
    2018 ORP
    Eibach stage 2, load lifter kit, Maggie w/ OTT tune... Other stuff.
    I must have looked at the plastic gauge cover wrong when i was figuring out where to mount the wideband a/f gauge. 2nd time replacing this ultra soft plastic part. Playing with 3M clear protection film but can't get it installed without glue lines.

    20250911_173859_resized.jpg
    20250911_173642_resized.jpg
     
  5. Sep 11, 2025 at 5:54 PM
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    5,008
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Jan. 2024: custom installed 2lb fire extinguisher between drivers seat and door -Feb. 2024: swapped interior lighting to diode dynamics led’s -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting -Feb. 13/2024: double ditch lights, on new Rago Fabrication Extension brackets. -3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Existing: 3inch EVERGEAR clear lens LED pods -May 2024: custom black aluminum grille mesh installed in front of factory plastic -June 2024: custom built powder coated dom sliders -Nov. 2024: thermo-plastic rear mudflaps -Dec. 2024: rear bumper cover clearance cut, sprayed newly exposed parts black -Jan. 2025: trailer hitch removal, relocation of rear led pods to crossmember New: -Exhaust pipe chop after axle -March 2025: new SPC upper control arms, bushings, balljoints. Raised front end 0.75” via Bilstein 5100 spring seat. -April 2025: Evergear bezel-less cube ditch lights 4 LEDs 40W 3.33A 4800Lm 328’ beam distance 30° 6000k beam angle shatter & crack resistant lens -April 2025: Evergear Ultra Series light bar 27-3/4” flood spot combo 60 LEDs 60W 5A 6000Lm 1227’ beam distance Dual row, dual beam angle 30°/60° April 2025: BULLY Rock Crawler Hi-Intensity LED Utility Lights, Pair 1260 lumens @ 15w (3 x 5w CREE) each 120° flood beam waterproof, dustproof. Under hood: -Blue Fire 6-Circuit Fuse Block w/ LED Indicator & Protection Cover -Blue Sea 100A Circuit Breaker w/ reset lever In progress/in the garage queue: ~ Wanted - 80% OFFROAD Hitch Replacement Recovery Point, PerryParts or Wheelers bump stops, 1" body lift, custom dom front bumper, winch, rear dom bumper with side hoops, kdss angle correction, C or D load 35’s, bolt on cat shields
    link pls
     
  6. Sep 11, 2025 at 6:10 PM
    Stoney Ranger

    Stoney Ranger Lockers? Pffft. Pizza Cutters baby

    Joined:
    Mar 19, 2021
    Member:
    #20419
    Messages:
    1,193
    Gender:
    Male
    First Name:
    Dave
    Driftless Area
    Vehicle:
    '18 SR5 Nauti Blue
    4x Rockers/Skids-Dobi-255's-F/R Bpr-Winch-Stickers-ALF
  7. Sep 11, 2025 at 6:48 PM
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    5,008
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Jan. 2024: custom installed 2lb fire extinguisher between drivers seat and door -Feb. 2024: swapped interior lighting to diode dynamics led’s -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting -Feb. 13/2024: double ditch lights, on new Rago Fabrication Extension brackets. -3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Existing: 3inch EVERGEAR clear lens LED pods -May 2024: custom black aluminum grille mesh installed in front of factory plastic -June 2024: custom built powder coated dom sliders -Nov. 2024: thermo-plastic rear mudflaps -Dec. 2024: rear bumper cover clearance cut, sprayed newly exposed parts black -Jan. 2025: trailer hitch removal, relocation of rear led pods to crossmember New: -Exhaust pipe chop after axle -March 2025: new SPC upper control arms, bushings, balljoints. Raised front end 0.75” via Bilstein 5100 spring seat. -April 2025: Evergear bezel-less cube ditch lights 4 LEDs 40W 3.33A 4800Lm 328’ beam distance 30° 6000k beam angle shatter & crack resistant lens -April 2025: Evergear Ultra Series light bar 27-3/4” flood spot combo 60 LEDs 60W 5A 6000Lm 1227’ beam distance Dual row, dual beam angle 30°/60° April 2025: BULLY Rock Crawler Hi-Intensity LED Utility Lights, Pair 1260 lumens @ 15w (3 x 5w CREE) each 120° flood beam waterproof, dustproof. Under hood: -Blue Fire 6-Circuit Fuse Block w/ LED Indicator & Protection Cover -Blue Sea 100A Circuit Breaker w/ reset lever In progress/in the garage queue: ~ Wanted - 80% OFFROAD Hitch Replacement Recovery Point, PerryParts or Wheelers bump stops, 1" body lift, custom dom front bumper, winch, rear dom bumper with side hoops, kdss angle correction, C or D load 35’s, bolt on cat shields
  8. Sep 11, 2025 at 6:54 PM
    dan777

    dan777 New Member

    Joined:
    Dec 29, 2024
    Member:
    #44714
    Messages:
    100
    Gender:
    Male
    First Name:
    Dan
    South Jersey
    Vehicle:
    19 ORP
    Link worked on my end. Maybe try searching the product brand name?IMG_0881.png
     
  9. Sep 11, 2025 at 7:08 PM
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    5,008
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Jan. 2024: custom installed 2lb fire extinguisher between drivers seat and door -Feb. 2024: swapped interior lighting to diode dynamics led’s -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting -Feb. 13/2024: double ditch lights, on new Rago Fabrication Extension brackets. -3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Existing: 3inch EVERGEAR clear lens LED pods -May 2024: custom black aluminum grille mesh installed in front of factory plastic -June 2024: custom built powder coated dom sliders -Nov. 2024: thermo-plastic rear mudflaps -Dec. 2024: rear bumper cover clearance cut, sprayed newly exposed parts black -Jan. 2025: trailer hitch removal, relocation of rear led pods to crossmember New: -Exhaust pipe chop after axle -March 2025: new SPC upper control arms, bushings, balljoints. Raised front end 0.75” via Bilstein 5100 spring seat. -April 2025: Evergear bezel-less cube ditch lights 4 LEDs 40W 3.33A 4800Lm 328’ beam distance 30° 6000k beam angle shatter & crack resistant lens -April 2025: Evergear Ultra Series light bar 27-3/4” flood spot combo 60 LEDs 60W 5A 6000Lm 1227’ beam distance Dual row, dual beam angle 30°/60° April 2025: BULLY Rock Crawler Hi-Intensity LED Utility Lights, Pair 1260 lumens @ 15w (3 x 5w CREE) each 120° flood beam waterproof, dustproof. Under hood: -Blue Fire 6-Circuit Fuse Block w/ LED Indicator & Protection Cover -Blue Sea 100A Circuit Breaker w/ reset lever In progress/in the garage queue: ~ Wanted - 80% OFFROAD Hitch Replacement Recovery Point, PerryParts or Wheelers bump stops, 1" body lift, custom dom front bumper, winch, rear dom bumper with side hoops, kdss angle correction, C or D load 35’s, bolt on cat shields
    Interesting. Thank-you!
    Also interesting…I still don’t see it after searching. And there’s only 3 products that come up under this brand (bumpers), but they all say sold out when you click.
    Maybe being located in Canada is a problem. Friggin Canada.

    IMG_9438.png
    IMG_9439.png
    IMG_9440.png
     
  10. Sep 12, 2025 at 6:07 AM
    Oscar

    Oscar New Member

    Joined:
    Mar 10, 2025
    Member:
    #45968
    Messages:
    126
    Arizona
    Vehicle:
    2022 Lime Rush TRD Pro
    interior LEDs
  11. Sep 12, 2025 at 6:33 AM
    nimby

    nimby in the drink

    Joined:
    Mar 27, 2017
    Member:
    #3777
    Messages:
    5,005
    First Name:
    Jake
    California
    Vehicle:
    2018 SR5P
    I would be weary of these cheap roof racks.

    Look at the space between the wind faring and the roof. Too much gap.

    Well designed roof racks have very minimal or no gap between the roof and the wind faring.
     
    RusPro17 and Turd Ferguson like this.
  12. Sep 12, 2025 at 6:55 AM
    themcnertney

    themcnertney New Member

    Joined:
    Jul 7, 2025
    Member:
    #47942
    Messages:
    47
    Gender:
    Male
    Akron, OH
    Vehicle:
    2019 SR5 Limited
    I agree. Mine comes today.
     
    This site contains affiliate links for which the site may be compensated.
    2016SR5P[QUOTED] likes this.
  13. Sep 12, 2025 at 6:55 AM
    Turd Ferguson

    Turd Ferguson New Member

    Joined:
    Jun 4, 2017
    Member:
    #4146
    Messages:
    1,774
    Gender:
    Male
    MA
    Vehicle:
    2017 TRD Offroad Premium
    Why are you guys buying trucks parts or anything at all from Temu?
     
    vthoky likes this.
  14. Sep 12, 2025 at 7:02 AM
    Oscar

    Oscar New Member

    Joined:
    Mar 10, 2025
    Member:
    #45968
    Messages:
    126
    Arizona
    Vehicle:
    2022 Lime Rush TRD Pro
    interior LEDs
    For future readers .. there are at least two well known discussions about these racks as mentioned here:
    https://old.reddit.com/r/4Runner/comments/1l1y43g/i_bought_it_so_you_didnt_have_to_temu_250_roof/

    when you dig down through the conversation .. you see a few points
    https://old.reddit.com/r/4Runner/co...t_so_you_didnt_have_to_temu_250_roof/mvos497/
    "If you do purchase, you need to also do two things:
    1. Buy some silicone and silicone seal the mounting points. I elected to reuse the factory hardware and rubber washers, but just to be safe, seal it.
    2. Buy some clear 3M wrap, or something similar so that the front coping doesn’t get dirt between itself and the paint, sanding it off over time. I actually bought a 4’ plastic home corner guard (thanks for the idea Ace Hardware man), and cut it in half down the middle, then to length. Works like a charm."
    and later
    https://old.reddit.com/r/4Runner/co...t_so_you_didnt_have_to_temu_250_roof/mvp6otj/
    "Commenter below you is absolutely right! With the plate up front, I hear no difference at all, actually provides a wee bit of (possibly imaginary) downforce at speed that feels like it lessens my body roll."

    another conversation around this Temu/Amazon/Generic rack:
    https://old.reddit.com/r/4Runner/comments/1lfo04a/i_too_bought_the_temu_roof_rack_so_you_dont_have/

    like so many things, do your own research.. weigh the cost, risk and use for you and then decide if a $1000 choice or $300 rack is right for you.
    The rack these alternatives are modeled after: https://prinsu.com/product/t4r5-prinsu-roofrack-full-no-drill-2/
     
  15. Sep 12, 2025 at 7:59 AM
    legend1011

    legend1011 New Member

    Joined:
    Apr 15, 2024
    Member:
    #39838
    Messages:
    340
    Gender:
    Male
    Vehicle:
    2024 White 4Runner TRD Offroad Premium
    Installed 2 rear interior molle panels (Cali-Raised). Now it looks like my 62 lb Golden Retriever is a Velociraptor.
     
    captrussia253 likes this.
  16. Sep 12, 2025 at 8:02 AM
    vthoky

    vthoky A mighty curious fellow

    Joined:
    Aug 6, 2024
    Member:
    #42053
    Messages:
    848
    Gender:
    Male
    Virginia
    Vehicle:
    2024 TRD ORP
    Trailer connector relocate, tint, work lights, Pro wheels.
    Chinesium. Ugh. :annoyed:
     

Products Discussed in

To Top