The foolproof way to program a FOB

Typical instructions suggest using the lock/unlock button inside the car. Do not use the button.
Use the key in the door. This addresses the issue of those who have older actuators that can't quite make it through the lock/unlock cycle resulting in NOT going into programming mode.

I figured it out!!! Do not use the lock/unlock button inside the car--use the key in the door:

1. Unlock all doors and open the driver's door. Leave open.
2. Insert key into ignition, remove it
3. While still open, insert key into driver's door and Lock/Unlock 5 times
4. Close door and reopen
5. While open, insert key into driver's door and Lock/Unlock 5 times
6. Inset key into ignition and turn to "on (do not start) then off.

The car is now in programming mode and ready to pair the FOB

7. On the FOB, press Lock and Unlock simultaneously
8. Locks will cycle.
9. On the FOB, press Unlock
10. Completed

 

great tip.