Bmc help

Just upgraded wheels and tires.
Black rhino arsenal wheels. Nitto g3 285/70/17.

3 in lift. RC- don't hate

Getting some rub, needing a bmc and need advice pic attached. Think i need lose from line? Possibly more?

 

For 33s you dont need a BMC, you need to adjust your UCA and trim up front a little and you should be done.
How much lift are you getting and what offset you getting the wheels?

 

Can't help you with the BMC question, but I sure am curious what that contraption is under your rocker panel...

 

@Pat23
Welcome here

I have 285/70’s on 9” wide 0 offset wheels, plus 1.25” spacers..so I luckily got a nice bmc done in a local guys home shop. There’s two types generally: bucked the end straight off like yours is marked for. Or, ripping the body mount lengthwise cutting off the inner face, like mine. And to finish you probably know a plate is welded over the cut area in both scenario.
Goodluck

 

@ChessGuy -12 on offset.

@glwood54 lol a hot mess. Scrap outta my bone yard so kids can climb in and out better, they have short legs.

1in Square tubing for steps. Something to hold over until I can work on rock slides.

New set to come.

 

We will get there. Still early on. Lots of things to get better!

 

Nice looking 4R @Pat23. I can't see your first pic, but here's what I used. https://www.4runnerlifestyle.com/products/total-chaos-fabrication-weld-on-body-mount-chop-plates
If you can weld, it will set you back $30 or so, plus paint. There is an install video out there for this kit if you're interested.