Bolts needed to reattach rear seats?

So I am looking to put the rear seats back on my 2016 SR5, but I'm an idiot and lost the bolts. Does anyone know the size/specs of the bolts I need so I can reattach the seat bottoms?

Thanks in advance!

 

dont worry, you will find the bolts AFTER you went out bought new ones and installed it. Never fails for me. Have you had your wife look for them? Thats another thing I do and she always finds them

 

Haha, sadly I know I left them at my old storage facility when I moved my stuff out... and when I realized it a day later the staff told me they didn't find anything

 

Welcome

 

Maybe pull a front seat bolt out and see if it fits? If so, there's what you gotta take to the hardware store.

 

They are M10, maybe by 40mm?

 

Middle or Third row?


M10 1.5

 

10 x 1.25 possibly 25-40 mm for length

 

Awesome, I'll try out the size you all suggested. Thanks gents!!

 

This tool is priceless:

$30 Nut and Bolt Thread Checker - (Red & Blue 44 Gauges) Aluminum Bolt and Nut Identifier Gauge - SAE and Metric Nut Bolt Size Gauge - Nut and Bolt Measurement Tool with Engraved Identification

https://www.amazon.com/Nut-Bolt-Thr...8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&th=1



There is a matching threaded stud on each one.

 

If you buy hardware store bolts, make sure to get the correct depth! Too long and you might hit the bottom of the bolt hole pocket.

 

Also spend a few cents more, and get high strength bolts.

 

Pretty overkill compared to the smaller bolt gauges: https://belmetric.com/metric-inch-pitch-gauges/?sku=SMPITCHGAUGEMM



They threw one in for free when I bought a set of smooth shank lower shock bolts for my Tacoma, because the OEM bolts had a stepped shank that cracked coilover bushings.