Kit for switches in the center dash cubby?

Anyone know a kit or switch bracket that fits in the little cubby in the center dash?

 

I've never seen a kit for that but it wouldn't be too hard to DIY. I have seen an ad for a small drawer to fit that place. If you're slightly handy, you could make a cutout in the front of that to accept any small switch you choose.

$13 TEYOUYI Storage Box for Toyota 4Runner 2014,Accessory for 5th Gen Toyota 4Runner,Center Dashboard Upper Cubby Drawer Accessories, Coin Cubby Drawer-Interior Upgrade, Contains Three Stickers

https://www.amazon.com/TEYOUYI-Acce...s=4runner+cubby+drawers&qid=1717418538&sr=8-3



(Use the back of the drawer for the front since the back does not have a notch.)

 

S-Tech has a couple different styles: https://stechswitch.com/4runner-photos/
Scroll through the pictures - maybe halfway through.

 

stechswitch.com has one that goes in the space below there

 

Jinx!

Edit: interesting, they don't show that version on the order page. Their website is so badly organized.

 

Hence why I only linked the photos

 

https://teamtechoffroad.com/search?q=4runner

 

Boom! thanks everyone!!!!

 

Not sure if it matters to you just I ordered it and I'll have to dremel out some material to fit Toyota sized switches.

 

I was thinking you'd definitely have to cut the back out. You should post some pics when you do it. I'd like to see how it goes.

 

It's just sitting in the box in storage for now but I bought a KDSS bypass, ABS bypass and TPMS readout that I want to put in there. They are all standard Toyota sized switches which I think is 22mm tall.

 

They have like 4 different layouts he will print for different switches so I'd drop him an email. The print quality was very good as was installation with the included template but I ended up using the lower pocket bracket instead for 6 Carling switches in my setup.

 

Haha I clicked on the site and ended up looking at the 355 one.. hmm this is wayyy more than 40!! I wish I could see what the carbon style One looked like it'd be a neat addition

 

Same area, different question. I have a 23 ORP and have relocated my USB/data port to the glovebox to keep a wireless CarPlay adapter out of the way. I'm trying to find a switch to fill the hole where the USB/data port used to be but haven't been able to find anything that fits there. Does anyone make a switch that will fit there (circled in green in the picture)? Thanks

 

Welcome to the forum. There's others out there like below and not limited to.

 

There is also MinWin

https://minwin3d.com/products/control-panel-insert-mount

 

I bought this fully customizable switch panel from S-Tech. Pardon the dust.
It does light up when the ignition is on.

 

Looks good!