1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

2006 4Runner Stalling in Gear

Discussion in '4th Gen 4Runners (2003-2009)' started by Stew5125, Apr 18, 2025.

  1. Apr 18, 2025 at 12:49 PM
    #1
    Stew5125

    Stew5125 [OP] New Member

    Joined:
    Apr 18, 2025
    Member:
    #46626
    Messages:
    1
    Vehicle:
    2006 4Runner 2WD 4.0L V6
    I replaced the valve cover gaskets and spark plug tube seals in my 2006 4Runner 2WD V6 4.0L after an oil leak and misfiring. Repair went well and reset ECU but now it stalls while in gear immediately upon pressing gas pedal. It idles fine with no problem, but when pressing gas pedal in park RPMs fluctuate between 1.5-2k never going above 2k. All lines and wires connected. Not throwing any codes
     

Products Discussed in

To Top