1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Death wobble suggestions

Discussion in '1st Gen 4Runners (1984-1989)' started by topstreet85, Jan 3, 2019.

  1. Jan 3, 2019 at 5:48 PM
    #1
    topstreet85

    topstreet85 [OP] New Member

    Joined:
    Jan 3, 2019
    Member:
    #8324
    Messages:
    1
    Gender:
    Male
    First Name:
    kobe
    Vehicle:
    lifted 85 22re 4runner
    35's, rear leafs up front, marlin trans, axle 2in forward.
    Hi guys im new to the forum and have a question. I have a 85 4runner and i am having some issues with death wobble when i hit a decent sized bump with one tire, looking for suggestions on where to start, ive heard steering stabilizer? thanks!
     
    Strandskov likes this.
  2. Jan 3, 2019 at 5:54 PM
    #2
    Firefly21

    Firefly21 New Member

    Joined:
    Sep 10, 2018
    Member:
    #7073
    Messages:
    337
    Gender:
    Male
    First Name:
    Duane Frazier
    Vehicle:
    18 off road premium trd
    Hid lows 3500 drl / high Led interior Led reverse Led oem fogs Sequential blinker Trd intake Unifilter pump mod Apex recover points BF Goodrich KO2 (matching trd spare) Kicker front tweeters Tvd overlays S2 yellow wide fogs Apex black sequential rear tails Cartrim home blue convex mirriors
    Get under it and have someone steer it left and right while u look at each linkage conection and see if anything is loose or doesnt move as it should. Also could be a tire out of balance. You can try and rotate it out and see if that helps

    https://youtu.be/IVN7ANLN6F0

    Similar set up on jeep but test is the same
     
    Strandskov likes this.
  3. Jan 3, 2019 at 5:58 PM
    #3
    Dark Knight

    Dark Knight Get off my lawn

    Joined:
    Sep 18, 2016
    Member:
    #2681
    Messages:
    1,096
    Gender:
    Male
    First Name:
    Jeff
    Not even close to the same set up.

    There is no trac-bar which is where 95% of the issue lies in a TJ.

    Jack it up from the front diff and check trunion bearings for wear and proper preload, check u bolts tight, check tie rod.

    Watch this video, https://www.youtube.com/watch?v=t0z-GZLq0mM&list=PLe7MiOkiiAJwzBP7LoQpyrlyqum6rH5Ab&index=6
    The important part is at about 7:08 talking about setting preload with the shims.

    Does it have factory push-pull steering still?
     
    Last edited: Jan 7, 2019
    Strandskov likes this.
  4. Jan 4, 2019 at 9:21 AM
    #4
    DGP1961

    DGP1961 New Member

    Joined:
    Sep 17, 2018
    Member:
    #7154
    Messages:
    983
    Gender:
    Male
    Vehicle:
    2018 SR5 Premium
    What the heck's death wobble?
     
  5. Jan 4, 2019 at 10:14 AM
    #5
    Dillusion

    Dillusion New Member

    Joined:
    Dec 10, 2018
    Member:
    #7998
    Messages:
    2,687
    Gender:
    Male
    First Name:
    KYle
    Vehicle:
    2018 TRD OR
    When your shit goes crazy and you can't stop it. Kinda like a tank slapper on a bike.
     
To Top