Opinion on Icon UCAs

I have been trying to figure out which arms to get and I finally decided I would go with Icon because they are sealed and require less maintenance. Then I started reading bad reviews about Icon in general. Most, if not all, the reviews were about their shocks so I was wondering if anybody can tell me whether or not their arms are still good despite their bad track record with their other products?

My other choice for arms would be MCM Fab via SRQ fabrications, or Camburg. I was seriously considering the Camburgs because I know they are reputable but those arms have an exposed uniball and that's really all that's stopping from pulling the trigger on them.

 

^Icon's shocks have been great in my experience over 13 years on three vehicles, but that's beside the point. Icon's Delta Joint is proprietary. You want an off the shelf ball joint, e.g. https://caliraisedoffroad.com/products/front-upper-control-arms-for-2-4-lift-fo-t705fu-fo-t705fu

 

https://youtu.be/InQnp42pfts?si=daFFFjivbKAtLpK6

 

I've seen this video and many like it. I've done my research and everything points to me getting the Icons but I'm just having doubts about Icons rep.

If anybody here has run their UCAs and can give me their opinion on them, that would be the most helpful thing for me.

 

Stock arms will suffice even for some serious off-roading if you stick with a mid-travel setup.

It's only when you go long travel that you'll need different arms anyway, and it'll be sold as an entire kit.