1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

So I have 2k to spend on my 89 I just picked up....

Discussion in '1st Gen 4Runners (1984-1989)' started by Jeeprunner90, Oct 6, 2018.

  1. Oct 6, 2018 at 8:49 AM
    #1
    Jeeprunner90

    #1
    Jeeprunner90 [OP] New Member

    Joined:
    Sep 30, 2018
    Member:
    #7326
    Messages:
    10
    Gender:
    Male
    First Name:
    Kellen
    Vehicle:
    1987 4runner
    So I picked up this 89 with a 3.0 and 5speed trans. Inside is immaculate and there is zero rust on this thing. I have to do a head gasket of course. Aside from the obvious gaskets, new water pump, and radiator, I have about 2k to spend on it. What would you guys recommend? I have a 22re I am rebuilding that will go in when the 3.0 takes a dump so I’m not spending anything on the motor. What do you guys think I should spend my money on? I also have 33’s in my garage im putting on.

    B5DA1333-F354-424D-9629-1AB679477F78.jpg
    75B17E20-E101-41E6-A4AE-65DF746698E6.jpg
     
    Jeeprunner90, Oct 6, 2018
    #1
    Pushyguy and Backslider like this.
  2. Oct 6, 2018 at 1:11 PM
    #2
    BestGen

    #2
    BestGen Member #57

    Joined:
    Apr 12, 2014
    Member:
    #57
    Messages:
    954
    Gender:
    Male
    First Name:
    Paul
    Haunted Turnbull Canyon, CA
    Vehicle:
    1988 4Runner XTE 22RE/W56, '93 G144 4.88s, Spartan Locker, AllPro Sliders, OEM 15x6" rims, BFG KM2 33/10.5s, 4Crawler 1.5" BJS, OME 2" Dakar springs, TG rear bumper.
    33"KM2s, 4.88s, Spartan Locker, TG rear bumper, AllPro Kickout sliders, 4Crawler 1.5" BJS, OME 2" Dakar springs.
    3.4 swap which is much easier to do than the 22RE swap.
     
    BestGen, Oct 6, 2018
    #2
  3. Oct 6, 2018 at 1:22 PM
    #3
    Dark Knight

    #3
    Dark Knight Get off my lawn

    Joined:
    Sep 18, 2016
    Member:
    #2681
    Messages:
    1,096
    Gender:
    Male
    First Name:
    Jeff
    Agreed with above.
     
    Dark Knight, Oct 6, 2018
    #3
  4. Oct 6, 2018 at 1:33 PM
    #4
    Jeeprunner90

    #4
    Jeeprunner90 [OP] New Member

    Joined:
    Sep 30, 2018
    Member:
    #7326
    Messages:
    10
    Gender:
    Male
    First Name:
    Kellen
    Vehicle:
    1987 4runner
    I have a 87 with a good trans and I’m rebuilding my 22re now. I’m looking to spend it else where than the engine
     
    Jeeprunner90, Oct 6, 2018
    #4
  5. Oct 6, 2018 at 1:34 PM
    #5
    Jeeprunner90

    #5
    Jeeprunner90 [OP] New Member

    Joined:
    Sep 30, 2018
    Member:
    #7326
    Messages:
    10
    Gender:
    Male
    First Name:
    Kellen
    Vehicle:
    1987 4runner
    This is basically a parts truck

    22741491-FD62-4D19-B112-317489351E91.jpg
     
    Jeeprunner90, Oct 6, 2018
    #5
  6. Oct 6, 2018 at 2:39 PM
    #6
    BestGen

    #6
    BestGen Member #57

    Joined:
    Apr 12, 2014
    Member:
    #57
    Messages:
    954
    Gender:
    Male
    First Name:
    Paul
    Haunted Turnbull Canyon, CA
    Vehicle:
    1988 4Runner XTE 22RE/W56, '93 G144 4.88s, Spartan Locker, AllPro Sliders, OEM 15x6" rims, BFG KM2 33/10.5s, 4Crawler 1.5" BJS, OME 2" Dakar springs, TG rear bumper.
    33"KM2s, 4.88s, Spartan Locker, TG rear bumper, AllPro Kickout sliders, 4Crawler 1.5" BJS, OME 2" Dakar springs.
    What are you planning on doing with it? Just a camping/hunting rig, mild trail runner, or hardcore rockcrawler?
    Also check the sheet metal around the windshield frame. This is where these trucks get cancer/rot.
     
    BestGen, Oct 6, 2018
    #6
  7. Oct 7, 2018 at 5:43 AM
    #7
    Jeeprunner90

    #7
    Jeeprunner90 [OP] New Member

    Joined:
    Sep 30, 2018
    Member:
    #7326
    Messages:
    10
    Gender:
    Male
    First Name:
    Kellen
    Vehicle:
    1987 4runner
    It will be for mild trail riding, camping and beach cruising. We don’t have anything hardcore out here so a sas would be pointless. The frame is actually is great condition and the body has almost 0 rust on it.
     
    Jeeprunner90, Oct 7, 2018
    #7
    Pushyguy likes this.
  8. Oct 8, 2018 at 5:25 AM
    #8
    fatherdaddy

    #8
    fatherdaddy New Member

    Joined:
    Sep 26, 2018
    Member:
    #7299
    Messages:
    6
    Gender:
    Male
    Central California
    Vehicle:
    1987 4Runner SR5
    Don't rush me
    What are you doing with the seats in your parts truck?
     
    fatherdaddy, Oct 8, 2018
    #8
  9. Oct 8, 2018 at 6:44 AM
    #9
    Jeeprunner90

    #9
    Jeeprunner90 [OP] New Member

    Joined:
    Sep 30, 2018
    Member:
    #7326
    Messages:
    10
    Gender:
    Male
    First Name:
    Kellen
    Vehicle:
    1987 4runner
    Not really sure
     
    Jeeprunner90, Oct 8, 2018
    #9
  10. Oct 9, 2018 at 8:09 PM
    #10
    fatherdaddy

    #10
    fatherdaddy New Member

    Joined:
    Sep 26, 2018
    Member:
    #7299
    Messages:
    6
    Gender:
    Male
    Central California
    Vehicle:
    1987 4Runner SR5
    Don't rush me
    Have you considered selling them? I'm particularly interested in acquiring some back seats.
     
    fatherdaddy, Oct 9, 2018
    #10
  11. Oct 10, 2018 at 5:23 PM
    #11
    pmac1

    #11
    pmac1 New Member

    Joined:
    Oct 10, 2018
    Member:
    #7426
    Messages:
    1
    Gender:
    Male
    I am also very interested in the rear seats. Thank in advance.
     
    pmac1, Oct 10, 2018
    #11
  12. Oct 11, 2018 at 2:48 AM
    #12
    Jeeprunner90

    #12
    Jeeprunner90 [OP] New Member

    Joined:
    Sep 30, 2018
    Member:
    #7326
    Messages:
    10
    Gender:
    Male
    First Name:
    Kellen
    Vehicle:
    1987 4runner
    Bidding war! PM me a offer
     
    Jeeprunner90, Oct 11, 2018
    #12
  13. Oct 11, 2018 at 12:42 PM
    #13
    fatherdaddy

    #13
    fatherdaddy New Member

    Joined:
    Sep 26, 2018
    Member:
    #7299
    Messages:
    6
    Gender:
    Male
    Central California
    Vehicle:
    1987 4Runner SR5
    Don't rush me
    Back to your original question. If you are talking mild trails and the beach, it seems you wouldn't need much. Winches and rock bumpers would seem unnecessary. You might want to invest in some recovery equipment, to get yourself out of deep sand. Maybe a receiver to pull a trailer or hold a carrier for camping trips? If you don't plan on getting crazy, and everything is mechanically sound, you don't really need anything. I've been reading that 33's might rub without some minimal lift. I read somewhere else that a 1" lift with a 1" body lift will get you enough space for the bigger tires without having to redo brake lines and such. Having just gotten started on cleaning up my recently acquired 87, I would take anything I say with a grain of salt.
     
    fatherdaddy, Oct 11, 2018
    #13
  14. Nov 14, 2018 at 11:00 PM
    #14
    tngo23

    #14
    tngo23 New Member

    Joined:
    Dec 5, 2016
    Member:
    #3141
    Messages:
    140
    Gender:
    Male
    First Name:
    Tony
    Vehicle:
    OG White
    Custom JL Subwoofer, TRD Wheels, Custom front grill/Led's, Blacked out emblems
    Who in CA can do a 3.4 Motor swap in a 1989 V6 3.0?
    Thinking ahead as I want a lil more power on her
    08F0CEF0-2071-4AD8-AF9F-0328241DEFDD.jpg
     
    tngo23, Nov 14, 2018
    #14
  15. Nov 16, 2018 at 1:27 AM
    #15
    Dark Knight

    #15
    Dark Knight Get off my lawn

    Joined:
    Sep 18, 2016
    Member:
    #2681
    Messages:
    1,096
    Gender:
    Male
    First Name:
    Jeff
    contact yota masters.
     
    Dark Knight, Nov 16, 2018
    #15
Register FREE to Reply!
To Top