1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

4runner Headlight Assembly (Poor Night Vision)

Discussion in '4th Gen 4Runners (2003-2009)' started by darth_caedus, Sep 17, 2018.

  1. Sep 17, 2018 at 2:50 PM
    #1
    darth_caedus

    darth_caedus [OP] New Member

    Joined:
    Sep 13, 2018
    Member:
    #7114
    Messages:
    1
    Gender:
    Male
    Vehicle:
    2003 SR5 4.7
    Hey Folks!

    I am new to these forums, but have been driving my 2003 4runner SR5 for almost a decade now. It is my favorite vehicle I have ever owned hands down.

    I recently read on the forums that it might be possible with some slight modifications to get head and tail light assemblies from a 2006-2009 4runner to fit my vehicle. Does anyone have any ideas as to where I might be able to find a set inexpensively?

    My brother and I own a 3d Printing shop and so if they are not an exact fit, it is likely we will be able to print a fitment solution.

    As I get older my night vision is deteriorating at an alarming rate and I have already done just about all I can do in terms of refurbishing my old headlights and would very much like to upgrade to LED or HID projector style lights, not just for the aesthetics. Does anyone on the forum have a similar issue with their night vision? Any recommendations on what is the best light hue or intensity for helping with this?

    I also plan to get fog lights installed in the blank spots that came from the factory with no lights installed.

    Anyways, been following these boards for a minute but this is my first post! I hope you all can give me a hand!
     
  2. Oct 27, 2018 at 6:04 PM
    #2
    DIRTBIKEDAVE

    DIRTBIKEDAVE 2nd 4Runner even better than the 1st one I had.

    Joined:
    Oct 25, 2018
    Member:
    #7578
    Messages:
    43
    Gender:
    Male
    First Name:
    Dave
    St. Louis, MO.
    Vehicle:
    My 2nd 03' 4th GEN. even better than the 1st. V8 SPORT
    VOLANT cold air intake, LED's inside, rear, and front. tinted window shades.
    guess by now you've put some lights upgrade . If not, I got the whole LED assembly for my 03. off eBay. very easy plug n play. i've tried led headlights (that light up everything) off eBay and really easy to plug in. So for nights. I use ZXE silver star from Advanced auto #9006, they are bright and show good aiming. If needed can raise the aiming too. I have the projector fog lights and trying the LED's in them. don't work as well as aftermarket led's. you can tell which is the LED on high beam :)IMG_2953.jpgIMG_3022.jpg
     
    This site contains affiliate links for which the site may be compensated.
    #2
  3. Dec 4, 2018 at 10:30 AM
    #3
    Batmango66

    Batmango66 New Member

    Joined:
    Aug 11, 2017
    Member:
    #4558
    Messages:
    29
    Gender:
    Male
    First Name:
    Tye
    N.E. Hoosier Land
    Vehicle:
    2006 Limited
    '06 Limited V8 Shadow Mica | USB Charger | OCD Console Organizer| Int. LEDs | Always on Fogs Mod | added LED strip light foot well | Smokers kit | Always on 115v | Always on 12v Cig. Lighter Mod | By-passed TPS | Wind Deflectors | 3/2 Corn Fed | 18" Moto Metal MO962 0 offset with General Grabber AT2 275/65's | Bilstein 5100's | 15% tint min. | 22" LED Light Bar Behind lower Grill | TINMANS Awesome Front Cup Holder. Yeah, I know it's mostly convenience and looks...
    I have a set of OEM headlights from my '06 that you could have if you pay for shipping. The passenger has a condensation issue but I would imagine that it could be taken care of with some silicone. I also have a set of blacked out that I am no longer in need of but they had very poor light throw so I took them off and put a set of black bezel ones on. Both sets of headlights are projector and are still clear. I'm in Fort Wayne, IN if you're close, we could meet up.
     
  4. Dec 4, 2018 at 3:30 PM
    #4
    Hyper15125

    Hyper15125 Headlight Retrofitting Hobbyist

    Joined:
    Apr 15, 2018
    Member:
    #5839
    Messages:
    168
    NJ (609)
    Vehicle:
    ‘14 SR5 T4R, ‘13 Taco TRD Sport DCLB, ‘02 SC430
    I had an ‘04 and had 35w 4300k HID bulbs in the low beams and they actually worked very well. The design of the reflector for those years produced a decent beam with minimal scatter.
     

Products Discussed in

To Top