What have you done to your 5th Gen 4Runner today?

What’s up everyone! I am currently in the market for a 5th gen, found one at a local dealer. 2014 Silver SR5 base with 81k miles for $24,888. Is this a good deal? It looks really clean and completely bone stock. Any advice would be appreciated.

 

Green auto body tape. Blue painters tape can pull up paint off plastic pretty easily. Green auto body tape is a little easier on paint when you pull it off. It also will help the paint and plastic not gum up and chip as you cut it. Measure twice and cut once FOR SURE! Post it when you are done! Ive cut in a handful of bumpers and it never gets easier! Triple check any directions and resources you have before cutting.

 

https://www.4runners.com/threads/accessory-meter-display-harness.18163/page-9#post-585020

 

Are your Toyo's factory size or larger? Looks good.

 

What type of rubbing do you have when you are off-road? Make any trims or cuts?

 

I installed an "Automatic Light Control Sensor For Lexus Toyota Highlander RAV4

$65 89121-30020 Automatic Light Control Sensor Headlight Sensor Replacement for Toyota 4Runner Corolla RAV4 2019-2021 Highlander for Lexus IS250 IS300 IS350 RC300 RC350 LC500 LC500h

89121-30020" that I found on ebay for $16.10 I installed it in my 2023 SR5 Premium. Works perfectly. Seller: partszhangus



PS: ebay confirm fit says it won't work...

 

PS: ebay confirm fit says it won't work...[/QUOTE]

For what it is worth:

installed the Genuine TOYOTA Lexus HIGHLANDER NAP Automatic Light Control Sensor

$65 89121-30020 Automatic Light Control Sensor Headlight Sensor Replacement for Toyota 4Runner Corolla RAV4 2019-2021 Highlander for Lexus IS250 IS300 IS350 RC300 RC350 LC500 LC500h

89121-30020

eBay Seller: General Auto Parts Dealer

Also works just fine.

 

Installed GOBI gas rear hatch struts/shocks. Much better than factory. They work perfect and easy instal.

SKU: GT4RRGS5GENX2 (Purchased directly from GOBI)

 

Little more than 2 weeks in. Ceramic 5%tint, remote start, rb20 slim steps, eibach suspension (just struts and shocks) no serious off roading, and trd pro grille treatment. Thinking head unit and speakers next or a set of 285s, suspension guy said they'll fit now

 

Put on some emblem overlays. I think the c-pillar emblems and the "4Runner" look great. I'm not 100% on the red Toyota logos though.

 

Sweet looking stance and overall rig! I'm with you on maybe not digging the red stuff though, I'd go black (or dark gray - whatever the other emblem color is)- that looks so great with your primary paint color.

 

I agree with your observation.

I'd appreciate info on the wheels you're running. They look great. Thanks

 

The wheels are Fuel Shok Anthracite 17x9 -12

 

Got tinted with 3M ceramic... tried to stay legal but I think I might bite the bullet and go darker.

Went with 30 front, 50 rears

Debating on getting 70 front and darkening the rear to 20 throughout... keep the fronts at 30

Definitely much cooler in the car now...

 

Go darker. I did. Sure, I'm rolling illegal as hell, but in Texas I need it to block the heat. The summers last 6 months here!

 

I am thinking of going 20% on top of my ceramic lol.. so I'll have to talk to the guy at the tint shop .. most of all is I want to keep it consistent between all windows whereas right now I am notice that my fronts are lighter ..

I am going to be in Nevada for the next year so definitely wanna go darker but I don't want to be like my friend who has to roll down his window to make a turn

 

I have to roll mine down, but only at night on streets that are not well light. During the summer time, it doesn't get dark until almost 8:30-ish PM. My old ass is in inside by then so I don't worry. But in the winter months when it gets dark by 5pm, then yeah, it can suck...sort of.

But you'll adjust and figure it out. The upside is: I have tons of privacy and my truck stays A LOT cooler when it's 109 degree's outside. Plus, it makes the truck look really freak'n cool.

 

Just installed the black rear valence since I did the front a while back to match the look.

 

leave it and add antlers in December

 

That's one of the first thoughts that came to mind. If the Toyota logo was lower on the front, it might not remind me of Rudolph.

 

Brightened up my cargo area/interior. I don’t like the blue white LED look so I finally got some warm whites and the cargo area + center dome are significantly better now. However the non-overhead cargo area light still bothered me and I’ve been thinking lots about wiring a light in there as others have done… but at Walmart today there was a very small warm white led light bar for $6 that caught my eye for simple battery power push button operation Velcro’d to the headliner. Easy peasy, looks well enough, very practical, I’m happy.

 

40AE in Barcelona red looks absolutely fantastic

 

I like the C pillars. Front one kinda reminds me of Rudolph the Rednosed Reindeer.

 

Put on the Weathertech side window deflectors.

 

@replica9000 where did you get the grey fender flares?

 

Finally got to hang some stuff from the inside window molle panels.

 

I had them painted while it was the body shop. Someone rear-ended me a few months ago.

 

What size tires & lift? Also, if 285, what rubbing do you have off-road. TIA.

 

The lift is 2.5". The tires are 295/70R17. I had to push back the front of the fender liner and trim the bumper a bit. I also cut out a section of the mudflaps where the body mount is. For light off-roading, I slightly rub the body mount.

 

The changed the Toyota logos from red to grey. I think it looks better.