Show us your wheel and tire setup

what is the actual height of the BFG's on the wheels all aired up ? I have had many different sizes of the BFG's and they have never been the advertised height . (285x70x17=32.8" tall)

 

Yokohama Geolander X-AT, 265/70r17 load range C...

 

was going to put my winter package on today - nomads and blizzaks but found out stock lug nuts won’t work with them

 

2023 ORP with OEM 17"x7.5" off-road wheels in charcoal gray that only came on the 2021-22 Trail Special Edition

 

Winter mode 265 blizzaks wirh 17x8.5 et 0 nomad wheels and summer mode 17x7 TrD wheels with 285 K02s

 

New to me T4R RWC 20 x 9 +18 245/55/20
Going to switch out to the TRD OEM running boards when it warms up here.
Looking for 9" wide by -25 or more o/s rim upgrade.

Not decided on diameter yet but love this look and poke. Someone here perhaps chime in please..plate is from New York.


Would love to see pics of Limited's with SCS 9" with -38.

 

Rev 2 : 285/70/17 BFG KO2's considerably better that the 265 street tires.

 

Absolutely !
Slick 4R

 

@2chains
hah your 4R. com account name is great.
as for your post, for what it's worth here's a photo of the poke on my 9" wheels at -32mm offset. (except 4R is Offroad trim, and 17" wheels, plus a 3/2 suspension lift)

 

Thank you sir

 

Yokohama Geolander X-AT, 265/70's, load rating C...

 

seen this Jeep at the No Frills grocery store
kinda like it, and the wheels
unique
anyone heard of the brand "Dirty Life"?

 

What’s the make of your rear bumper? Looks sick dude

 

No need to thank me for the speedy response *rolls eyes* LOL

JCR OFFROAD/VICTORY 4x4

 

Nice ride.
I kinda was looking forward to the polar bear family, until I scrolled down and was disappointed, but then chuckled

 

RRW 17x8.5 -12
Nitto Ridge Grappler 285/70/17
OME 3" lift
(Soon to move down to a 2.5" lift to gain better articulation and improve CV angles)

 

Just picked up a 2018 4Runner. Love it. Got some new wheels on it today.

DX4 Rhino
17x8.5 with -18 offset
265/70/17 BFG Trail Terrains

Absolutely love the stance. Just the perfect amount of poke.
It does slightly rub only on one side in full lock reverse. Easy to remedy.

 

Stock trail rims with Falken 285/70/17

 

The bottom one looks like Ron Perlman

 

New TRD pro w stock Dunlops

Still waiting on center caps

 

Very nice.

Resurrecting your old post @Yotaholic, but I'm curious about how much it took to fit those. That's what I'm putting on this week. I expect to drive a hammer for a while and BMC, but was there anything else?

 

Stock wheels can take 285/75/R17s. To have no rubbing, you need BMC, mud flaps removed, and Viper cut.

 

Sweet. Thank you! I got Method 703's, 0 offset. Already removed flaps, will do my own BMC, and was planning the viper cut in the future anyway. And the 3" lift is going in first. I do wonder if I'll need to consider adjusting the top of the well or put in an extended bumpstop. We shall see. Thanks again!

 

You absolutely need the Viper cut to be able to turn at full flex. It is cheap, removes rubbing, lets you put a foot on the boulders, and makes your truck look awesome.

 

Nice. You're on path to success if your willing to do those things. I recommend chopping your fender liner too when viper cutting. I sprayed my pink washer fluid black, and a tank skid plate (or relocation kit) are options too. I have 3' lift too, extended bump stops is something that should def be high on our list to save the strut and such.
Good luck

 

Ok just gunna leave a photo of my wheels and tires here, for like the 3rd time. It's ok, it's a fresh photo

 

MTs?

 

Yes sir
Mickey Thompson on Mickey Thompson's
I'm the one and only !

 

My phone background...LOL