1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Front sits slightly higher than rear after replacing suspension

Discussion in '3rd Gen 4Runners (1996-2002)' started by Mikey#48, Feb 19, 2018.

  1. Feb 19, 2018 at 5:50 PM
    #1
    Mikey#48

    Mikey#48 [OP] New Member

    Joined:
    Feb 19, 2018
    Member:
    #5517
    Messages:
    2
    Gender:
    Male
    Vehicle:
    97 4Runner 2wd
    I have a 97 2wd limited 4Runner that I recently replaced the ball joints, struts, rear shocks/springs, etc..
    I used the recommended replacement parts but now the front end sits slightly higher than the rear. I have driven the car for about s month hoping the front end would settle and lower but it didn’t.
    Any recommendations on how to make it level?
     
  2. Feb 20, 2018 at 8:04 AM
    #2
    Caltech90

    Caltech90 New Member

    Joined:
    Aug 24, 2017
    Member:
    #4637
    Messages:
    127
    Gender:
    Male
    Vehicle:
    '19 TRD OR
    Sounds like the rear suspension is tired. You might want to look at replacing your rear coils and shocks.
     
  3. Feb 20, 2018 at 8:51 AM
    #3
    Mikey#48

    Mikey#48 [OP] New Member

    Joined:
    Feb 19, 2018
    Member:
    #5517
    Messages:
    2
    Gender:
    Male
    Vehicle:
    97 4Runner 2wd
    Yes I replaced the rear shocks and springs but the front still sits a little higher. I was wondering if a taller rear spring would help
     
  4. Aug 8, 2018 at 9:42 PM
    #4
    GenIIIPauly

    GenIIIPauly New Member

    Joined:
    Apr 12, 2018
    Member:
    #5821
    Messages:
    7
    Gender:
    Male
    First Name:
    Paul
    Vehicle:
    Gen III SR5 ready to hub up!!
    New 3.4L, new tranny, fuel and brake systems, 3" Rancho suspension lift, BFG KO2's needs paint still
    My 98, same thing! Makes it a bitch when I'm on a technical part....

    GenIII.jpg
     

Products Discussed in

To Top