1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

ramonortiz55 4runner build: La Venenosa

Discussion in '3rd Gen Builds (1996-2002)' started by ramonortiz55, Dec 13, 2015.

  1. Jan 11, 2017 at 7:56 PM
    #91
    inocoma

    inocoma mud slinging mall crawler for now.

    Joined:
    Oct 7, 2016
    Member:
    #2791
    Messages:
    122
    Gender:
    Male
    First Name:
    Jon
    Southern California
    Vehicle:
    2017 4Runner TRD Pro
    TRD Radiator and Oil cap
    Two is One and One is none.
     
    Palerider[QUOTED] likes this.
  2. Jan 12, 2017 at 5:28 AM
    #92
    ramonortiz55

    ramonortiz55 [OP] New Member

    Joined:
    May 3, 2015
    Member:
    #590
    Messages:
    1,665
    Gender:
    Male
    First Name:
    Ramon
    Vehicle:
    2001 4runner limited silver millenium
    thanks guys!
     
  3. Jan 12, 2017 at 5:40 AM
    #93
    Palerider

    Palerider New Member

    Joined:
    Feb 24, 2016
    Member:
    #1615
    Messages:
    655
    Gender:
    Male
    First Name:
    Mark
    Vehicle:
    2016 TRD PRO quicksand
    Installed Rago brackets and 4" cube ditch lights. Weather tech mats. Cargo net. Cargo mat. Ordered Gobi rack with ladder.
    You explain your Mods very well. Really helps the rest of us. Keep up the great work.
     
  4. Jan 12, 2017 at 6:34 AM
    #94
    ramonortiz55

    ramonortiz55 [OP] New Member

    Joined:
    May 3, 2015
    Member:
    #590
    Messages:
    1,665
    Gender:
    Male
    First Name:
    Ramon
    Vehicle:
    2001 4runner limited silver millenium
    Thanks! I take my time working on my vehicles, helps with making these writeups
     
  5. Apr 5, 2017 at 5:45 AM
    #95
    ramonortiz55

    ramonortiz55 [OP] New Member

    Joined:
    May 3, 2015
    Member:
    #590
    Messages:
    1,665
    Gender:
    Male
    First Name:
    Ramon
    Vehicle:
    2001 4runner limited silver millenium
    Last weekend I decided to clean the throttle body on my 4runner.

    Decided to document the procedure In hopes it would benefit someone who likes do things on their own:

    For this task, I picked up some throttle body cleaner, a rag, and my wife's toothbrush:

    [​IMG]

    One of the most important steps in this procedure is to stare down the throttle for a good 2 or 3 minutes. This helps break down the carbon inside. The harder you stare, the more it breaks down and easier it is to clean. Sorta like WD-40 loosens up rusted nuts and bolts.

    [​IMG]

    First step is removing the airbox assembly, loosen airbox bolts and straps:

    [​IMG]

    [​IMG]

    unplug mass airflow sensor and any other connectors in the vicinity:

    [​IMG]

    There will be a smaller airbox towards the firewall with some airlines connecting into it, remove the airhoses and the small airbox:

    [​IMG]

    [​IMG]

    Don't forget the airhoses that run towards the front of the engine towards the piping of the airbox:

    [​IMG]

    [​IMG]

    Loosening these thinner clamps will help removing the piping to the airbox:

    [​IMG]



    [​IMG]

    Remove another plug, this one is right besides the accelerator cable:

    [​IMG]

    Three cooling lines will be feeding into the throttle body, these can be removed also:

    [​IMG]

    [​IMG]

    [​IMG]

    Another plug:

    [​IMG]

    Remove the accelerator cable off the throttle, this can be done by clocking the body of the spring and sliding it out carefully:

    [​IMG]

    Another picture of everything removed:

    [​IMG]

    Remove the two top nuts that are holding the throttle in position:

    [​IMG]

    Now remove the bottom bolts that are holding the throttle in position:

    [​IMG]

    Pull off the throttle gently:

    [​IMG]

    Take it to the operating table:

    [​IMG]

    Generously spray inside the throttle body with cleaner and brush the carbon off with your wife's toothbrush and rag:

    [​IMG]

    Carefully rotate the "door" to make sure all the carbon buildup has been cleaned out.

    If you aren't bleeding, you aren't done:

    [​IMG]

    Once you are satisfied with the removal of carbon, installation is reverse of removal.

    [​IMG]
     
  6. Apr 5, 2017 at 5:48 AM
    #96
    ramonortiz55

    ramonortiz55 [OP] New Member

    Joined:
    May 3, 2015
    Member:
    #590
    Messages:
    1,665
    Gender:
    Male
    First Name:
    Ramon
    Vehicle:
    2001 4runner limited silver millenium
    The illumination bulbs were out on my AC controls, ECT, rear window button, rear defroster, and power point.

    This is a write up on the step by step process I took to replace the bulbs.

    My research was done here: ***************************************************************************

    After reading thru those threads, I determined I needed the following part numbers. These are for a 2001 4runner, the bulbs for other 4runner generations might be different.

    2001 4runner limited climate control light bulbs:

    Part Number #81850-35050 - 2 Total
    Part Number #81850-35040 - 2 Total

    Hazard control light bulb:

    Part Number #84999-10860 - 1 Total

    ECT and Defroster light bulb:

    Part Number #90010-01041 - 1 Total

    Rear window roll down:

    Part Number #90010-01042 - 1 Total

    Cigarette lighter:

    Part Number #84999-10250 - 1 Total

    ***************************************************************************

    Ordered all my bulbs from Camelback Toyota:

    [​IMG]

    Removing the center console cup holder, this is done by tugging it off:

    [​IMG]

    [​IMG]

    Then removing the shifter surround:

    [​IMG]

    Next, the radio surround is removed, gently pry it away from the dash:

    [​IMG]

    Pull it out slowly to reveal the plugs by the ac vents:

    [​IMG]

    Unplug the power point plugs:

    [​IMG]

    [​IMG]

    Once the power point plug connector has been removed, locate the bulb - it is the gray end of the power point:

    [​IMG]

    Twist to remove:

    [​IMG]

    Next, I removed the hazard switch:

    [​IMG]

    This is done by releasing the side tabs:

    [​IMG]

    Next, I removed this portion:

    [​IMG]

    This is done by releasing tabs at the ends AND at the top center:

    [​IMG]

    [​IMG]

    Next I removed the AC controls faceplate, tabs are on top. This is very flimsy, so careful:

    [​IMG]

    [​IMG]

    I then removed the screws that hold in the AC control unit, disconnected the rear plugs and pulled it out:

    [​IMG]

    At this moment, I went ahead and installed the power point bulb:

    [​IMG]

    Time for some surgery. Hazard switch:

    [​IMG]

    Twist and pull out the bulb, replace with new one:

    [​IMG]

    Now the strip, this has two bulbs. One for defroster and ECT, another bulb for the rear window switch:

    [​IMG]

    A needle nose pliers will allow the removal of one of the bulbs.

    [​IMG]

    To remove the other, the backing must be removed, a small flat head screwdriver helps here. I then removed the other bulb and replaced it.

    [​IMG]

    Next step of the surgery was to open the front of the AC control unit. I removed two screws. FOUR tabs need to be released on the top and bottom. Forks or toothpicks help keeping tabs open while I worked on other tabs.

    [​IMG]

    [​IMG]

    [​IMG]

    Carefully opened the AC control unit..

    [​IMG]

    [​IMG]

    Bulbs removed and replaced:

    [​IMG]

    [​IMG]

    I then assembled the AC control unit together.

    Reinstalled everything back together.

    Finally have all my illumination working properly!
     
    jester243 likes this.
  7. Apr 5, 2017 at 5:48 AM
    #97
    ramonortiz55

    ramonortiz55 [OP] New Member

    Joined:
    May 3, 2015
    Member:
    #590
    Messages:
    1,665
    Gender:
    Male
    First Name:
    Ramon
    Vehicle:
    2001 4runner limited silver millenium
    Decided to do a detailed writeup for swapping the valve cover gaskets on my 2001 4runner.

    This job took me nearly two days - It was my first time doing this and I do like to take my time while working on cars. I've been known to start working on a car, leave it alone and come back and finish it a few days later. LOL.

    I know some of you are not as patient as me, I just am never in a rush when working on cars.

    So this it the list of items needed with Toyota Part numbers:

    1. Valve cover gaskets - Part #11213-62020 - 2 Total
    2. Spark Plug Tube gaskets - Part #11193-16010 - 6 Total
    3. Intake Plenum Gaskets - Part #17176-62040 - 2 Total
    4. Washer Seals - Part #90210-05007 - 16 Total
    5. Camshaft Plugs - Part #11188-62010 - 2 Total
    6. Halfmoon Plugs - Part #11183-62010 - 4 Total
    7. PCV Valve Grommet - Part #90480-18001 - 1 Total
    8. Toyota FIPG seal packing - Part #00295-00103 - 1 Tube

    **Throw the PCV Valve Grommet and Spark Plug Tube Gaskets in the Freezer a night before. I will explain why later**

    Mandatory parts picture:



    My research links: http://www.yotatech.com/f2/5vzfe-leaky-valve-covers-fixed-56k-beware-149594/

    Now let's tackle this job!

    First step is removing the airbox assembly, loosen airbox bolts and straps:

    [​IMG]

    [​IMG]

    unplug mass airflow sensor and any other connectors in the vicinity:

    [​IMG]

    There will be a smaller airbox towards the firewall with some airlines connecting into it, remove the airhoses and the small airbox:

    [​IMG]

    [​IMG]

    Don't forget the airhoses that run towards the front of the engine towards the piping of the airbox:

    [​IMG]

    [​IMG]

    Loosening these thinner clamps will help removing the piping to the airbox:

    [​IMG]



    [​IMG]

    Remove another plug, this one is right besides the accelerator cable:

    [​IMG]

    Three cooling lines will be feeding into the throttle body, these can be removed also:

    [​IMG]

    [​IMG]

    [​IMG]

    Another plug:

    [​IMG]

    Remove the accelerator cable off the throttle, this can be done by clocking the body of the spring and sliding it out carefully:

    [​IMG]

    Another picture of everything removed:

    [​IMG]

    Remove the two top nuts that are holding the throttle in position:

    [​IMG]

    Now remove the bottom bolts that are holding the throttle in position:

    [​IMG]

    Pull off the throttle gently, pay real close attention how the metal gasket is oriented. It needs to go back the same way or your truck will explode:

    [​IMG]

    Next, we will remove the upper intake manifold. Make sure to give it a good stare before you start. Nice, hard, evil stare. You're going to own that intake manifold. It's yours. Touch it. Feel it. Be the Manifold:



    To remove it loosen these brackets that hold the speedometer cable:



    and these other brackets that are on the driver's side of the manifold. (the bracket with the blue paint might need to be removed from the other end if you cant fit a ratchet at the upper bolt):



    disconnect this hose at the far end of the manifold, on top:



    Next, remove all the other bolts that hold down the intake manifold - Not pictured. Manifold should then come off.



    Now time to remove the lower intake manifold -

    If for some reason you couldn't take the speedometer bracket off due to it being too congested, you can take it off now:



    This stainless tubing has hose attached to the ends, take off the hose. I didn't have to remove the tubing itself, just the hose.



    Remove the computer diagnostics port that is attached on the driver's side of the manifold:



    At the back of the lower intake manifold, there is a bolt holding the wiring harness, remove it.



    At this time, the bolts holding the lower intake manifold can now be removed.



    Remove the remaining bolts holding the lower intake manifold down:



    Once the lower intake manifold is removed, cover up the exposed intake chambers with a rag, tape, etc to prevent stuff from falling in there. You do NOT want a bolt falling in there. Might as well jump off a bridge:



    Moving onto the passenger side valve covers, remove the spark plug wires and coil packs:



    disconnect the injectors:



    Remove the bolts holding down a wire bracket - This will not be able to be removed completely, but taking the bolts off will make the job easier. It will give you room to work with.



    At this time, the valve cover can be removed:



    So beautiful, so clean. Thanks to frequent oil changes :)



    At the end of the engine heads there will be a wiring harness attached to a bracket, close to where my hand is at. If you feel around, you will find it. This will need to be removed:



    Looks like this:



    There are two halfmoon plugs per side:

    one in the front:



    one in the back:



    one camshaft plug in the back that is being held down by two bolts:




    The halfmoon plugs can be removed with some channel locks. Gently pry upward. UPWARD. You may wiggle a little. Just not much. Don't want to crack the head. :anonymous:

    Removed:





    Remove the camshaft plug:







    At this time, make sure your supervisor approves your work:

     
    jester243 likes this.
  8. Apr 5, 2017 at 5:49 AM
    #98
    ramonortiz55

    ramonortiz55 [OP] New Member

    Joined:
    May 3, 2015
    Member:
    #590
    Messages:
    1,665
    Gender:
    Male
    First Name:
    Ramon
    Vehicle:
    2001 4runner limited silver millenium
    After you have received supervisor approval, clean off the old gasket material using any scraping tool. Make sure to scrape well in the areas where the halfmoon and camshaft plugs go:



    After that is done get your valve cover and flip it over. The spark plug tube gaskets will now be replaced:



    Grab a small screwdriver and tap the gasket from the other side:





    Pull out the PCV grommet:



    Now remove the old washers seals:



    I did this by tapping it from the other end with a small flat head screwdriver:





    At this point, go back to the freezer and grab the THREE replacement gaskets and the PCV grommet:



    Pop the new PCV grommet in:



    Pop the new replacement gaskets in. Some people use a large socket to get them to sit right. Since I froze them, they were able to shrink. Making my job easier:



    Sit the new valve cover gasket carefully:



    Notice the areas that will need seal packing, this is where the FIPG goes. Be generous. Don't skimp out, you want a nice noticeable ooze when you sit it on the head:



    Install with new camshaft plug:



    Now goes the halfmoon plugs:



    Same procedure, a nice noticeable ooze:



    The Toyota manual indicated to add extra FIPG to the indicated locations:



    I made sure it was on there :D





    Set the cover on carefully:



    Torque the valve cover bolts down to



    The procedure for the driver's side is the same as the left, with the exception of a wiring harness section going above the valve covers:



    I didn't chase down the harness to see what it was for, I just worked around it.

    Once the driver's side is done, install everything as it was removed. Replace the plenum gaskets between the manifolds.



    Done!
     
    jester243 likes this.
  9. Apr 5, 2017 at 5:50 AM
    #99
    ramonortiz55

    ramonortiz55 [OP] New Member

    Joined:
    May 3, 2015
    Member:
    #590
    Messages:
    1,665
    Gender:
    Male
    First Name:
    Ramon
    Vehicle:
    2001 4runner limited silver millenium
    picked up some accessories for finishing a simple OBA

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
  10. Apr 5, 2017 at 5:50 AM
    #100
    ramonortiz55

    ramonortiz55 [OP] New Member

    Joined:
    May 3, 2015
    Member:
    #590
    Messages:
    1,665
    Gender:
    Male
    First Name:
    Ramon
    Vehicle:
    2001 4runner limited silver millenium
    Picked up some King Coils from a fellow TW member:

    [​IMG]

    [​IMG]

    After powder:

    [​IMG]
     
  11. May 1, 2017 at 11:46 PM
    #101
    DELPIERO10

    DELPIERO10 New Member

    Joined:
    May 1, 2017
    Member:
    #3981
    Messages:
    5
    Gender:
    Male
    Advice me, Where Could i get some wires for my battery like yours?
     
  12. May 2, 2017 at 5:21 AM
    #102
    ramonortiz55

    ramonortiz55 [OP] New Member

    Joined:
    May 3, 2015
    Member:
    #590
    Messages:
    1,665
    Gender:
    Male
    First Name:
    Ramon
    Vehicle:
    2001 4runner limited silver millenium
    The thick cable wires can be purchased at Napa. They cut to length.
     
  13. May 3, 2017 at 1:37 PM
    #103
    DELPIERO10

    DELPIERO10 New Member

    Joined:
    May 1, 2017
    Member:
    #3981
    Messages:
    5
    Gender:
    Male
    And the terminals and the gauge?
    This is by far some if the best builds, you explain all very well, are you some sort of electrician, mechanic, welder comb?
     
  14. May 3, 2017 at 1:39 PM
    #104
    ramonortiz55

    ramonortiz55 [OP] New Member

    Joined:
    May 3, 2015
    Member:
    #590
    Messages:
    1,665
    Gender:
    Male
    First Name:
    Ramon
    Vehicle:
    2001 4runner limited silver millenium
    I purchase the kit from a vendor on Tacomaworld.

    But the wires can purchased at Napa.
     
  15. May 10, 2017 at 1:44 PM
    #105
    3378jakesr5

    3378jakesr5 New Member

    Joined:
    May 10, 2017
    Member:
    #4026
    Messages:
    6
    Gender:
    Male
    First Name:
    jake
    Vehicle:
    SAS silver tacoma
    yes, all of them
  16. May 10, 2017 at 1:52 PM
    #106
    ramonortiz55

    ramonortiz55 [OP] New Member

    Joined:
    May 3, 2015
    Member:
    #590
    Messages:
    1,665
    Gender:
    Male
    First Name:
    Ramon
    Vehicle:
    2001 4runner limited silver millenium
    WTF.. Get out! :laser:
     
    3378jakesr5[QUOTED] likes this.
  17. May 10, 2017 at 1:56 PM
    #107
    3378jakesr5

    3378jakesr5 New Member

    Joined:
    May 10, 2017
    Member:
    #4026
    Messages:
    6
    Gender:
    Male
    First Name:
    jake
    Vehicle:
    SAS silver tacoma
    yes, all of them
    NEVERRRRRRRRR
     
  18. Oct 16, 2017 at 7:22 AM
    #108
    ramonortiz55

    ramonortiz55 [OP] New Member

    Joined:
    May 3, 2015
    Member:
    #590
    Messages:
    1,665
    Gender:
    Male
    First Name:
    Ramon
    Vehicle:
    2001 4runner limited silver millenium
    Swapped my icon coils to taller king coils over the weekend:

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
  19. Oct 16, 2017 at 7:23 AM
    #109
    ramonortiz55

    ramonortiz55 [OP] New Member

    Joined:
    May 3, 2015
    Member:
    #590
    Messages:
    1,665
    Gender:
    Male
    First Name:
    Ramon
    Vehicle:
    2001 4runner limited silver millenium
    I was able to obtain a 3rd gen 4runner Rago Fabrication Modular panel for my rear side windows.

    These panels will require drilling trim and removing the back cargo panels for proper installation.

    I highly recommend:

    1. Beer.

    2. A friend to help you - This is not a solo job.

    3. Time - This is not a job you want to start after work, during the week. You will need at least half a day to install both panels.



    You will need a rivnut tool, a drill, a step bit that steps up to at least 3/4" diameter, and 1/8" pilot bit, and a 25/64" drill bit.

    The 25/64" drill bit is important since the holes for the rivnuts must be EXACT. I recommend making sure the rivnuts in the packaging are all the same diameter and the drill bit is sized accordingly. There can not be room for error here.



    Make sure you have a helper. Even if it is your feline.



    First order of business is to remove the rear cargo panels. The first thing to be removed is the hatch floor trim -





    Next, remove the top panel where the hatch light is at.



    This is done by removing the light cover:



    Removing the four screws and the bulb:



    [​IMG]

    Pry the lighting bracket away from the roof trim carefully and pull out the power plug:



    at the ends of the roof trim there will be two small brass screws, remove these as well:



    Now the top trim can be removed by pulling firmly:





    Next we remove cargo cover brackets, removing the visible bolts will release them





    The shoulder panel must now be removed (picture was taken before I removed the cargo cover bracket):



    To remove the shoulder panel, the door floor trim must be removed, locate two screws and remove the door floor trim by firmly pulling away.



    The shoulder trim can now be removed by pulling firmly. No screws are located on the shoulder trim.



    The main cargo panel can now be removed. In this case, the passenger side:





    We will now locate the TWO outer holes where the trim fasteners push into. In the picture below, you will see four holes below the window. It is the two outer holes.



    Pointing at the left and right hole respectively:





    Once they have been located - drill out the hole to the size of the rivnut:



    Use the step bit to de-burr the holes. We want nice clean holes to set the rivnut:



    Test fit and set rivnut:





     
  20. Oct 16, 2017 at 7:24 AM
    #110
    ramonortiz55

    ramonortiz55 [OP] New Member

    Joined:
    May 3, 2015
    Member:
    #590
    Messages:
    1,665
    Gender:
    Male
    First Name:
    Ramon
    Vehicle:
    2001 4runner limited silver millenium
    Drink Beer. Pet Cat.

    Next:

    A pilot hole will be drilled from the BACK end of the trim panel.

    Remember where the rivnuts are?

    The trim fasteners that were in this location are now obsolete. Remove them from their seats on the back of the panel. Use the center of the fastener seat to create your pilot hole.



    Grab the step bit and drill out to 3/4" hole, stopping periodically to check the fitment of the aluminum spacer. You want a nice snug fit. Don't over drill. Be patient.



    You can barely see the rim of the fastener seat thru the hole. Use it to make sure you are centered.



    Test the spacer for a nice, snug fit.



    This is what the back end will look like:



    Once the hole in the trim is complete - it will be centered against the rivnuts:



    Drill your second hole and install the panel, yes. INSTALL it. Make sure all the fasteners clip in place. Make sure it doesn't wobble. Make sure it is set to STAY. You will see why. This is important.

    Install the top brackets on the modular panel:







    Install modular panel (top brackets not shown here):



    Side view for clarity:



    Next make sure your friend is holding the panel to where the brackets are away from the window - I have it about a 1/4" clearance.

    Use the slotted holes in the bracket to center the pilot bit, drill thru the trim and mark a location in the metal beyond the trim. This will locate where the rivnut goes.

    Next, drill out the trim hole with the step bit in the same manner as mentioned before, drill your hole for the rivnut and set rivnut.

    The finished spacer install should look like this:



    Once the second location has been drilled and set, the panel can now be installed:





    Same installation procedure for the passenger side:



    Install goods and enjoy!

     
  21. Oct 16, 2017 at 7:25 AM
    #111
    ramonortiz55

    ramonortiz55 [OP] New Member

    Joined:
    May 3, 2015
    Member:
    #590
    Messages:
    1,665
    Gender:
    Male
    First Name:
    Ramon
    Vehicle:
    2001 4runner limited silver millenium
    Installed new swingout last weekend!

    [​IMG]

    [​IMG]
     
    GPSevinSixx likes this.
  22. Oct 16, 2017 at 10:08 AM
    #112
    RonT4R

    RonT4R New Member

    Joined:
    Mar 24, 2015
    Member:
    #526
    Messages:
    584
    Gender:
    Male
    First Name:
    Ron
    Virginia Beach
    Vehicle:
    2007 4runner SR5 4WD
    Damn Ramon, I now label you as "Write Up Master"!!!! Everyone was well presented and explained.......:bowdown:
     
    ramonortiz55[OP] likes this.
  23. Oct 16, 2017 at 12:38 PM
    #113
    ramonortiz55

    ramonortiz55 [OP] New Member

    Joined:
    May 3, 2015
    Member:
    #590
    Messages:
    1,665
    Gender:
    Male
    First Name:
    Ramon
    Vehicle:
    2001 4runner limited silver millenium
    thank you!
     
  24. Dec 26, 2019 at 9:28 AM
    #114
    ramonortiz55

    ramonortiz55 [OP] New Member

    Joined:
    May 3, 2015
    Member:
    #590
    Messages:
    1,665
    Gender:
    Male
    First Name:
    Ramon
    Vehicle:
    2001 4runner limited silver millenium
    4runner will be up for sale soon. I would like to move on to building my Tacoma
     

Products Discussed in

To Top