Best phone mount options

After a lot of thought I decided to the left of the driver side on about the same plain as the instrument cluster and Head unit would be the most ideal placement. Less distraction and can still see the road in my peripherals. Easy to reach too.

Then I determined a charging dock would be best so I searched for the best I could find. The iOttie one touch wireless 2 Qi charger fit the bill. I have used these in the passed and they get better and better with telescoping arm and sticky suction cup, wireless charging is sweet too. Easy one hand mount/dismount.



I also use Car Home Ultra as the auto default when driving for easer use.

 

Is the file on thingverse or did you design it?
I can print one out of ABS.

 

I have had the off roam for a few months too and it’s the best one I’ve used. Been through about 4 others. 4wheeling, snow, Mtn roads - holds up well in all conditions! In my opinion - worth the $$

 

Off roam here also.

 

I designed this one.

 

I use a cup holder mount with a new magsafe qi head on it, works slick but uses a cup holder, doesn’t matter to me though.

 

I just bought one!

 

Anyone using a QuadLock? I am using the vent clip with the charging attachment. And I can’t stand it. I like the quad lock I just don’t like the placement of it. I read thru this thread and I got some really good ideas, but is anyone else using one?

 

I used a QuadLock for a few months in my Tacoma. It's a great mount, but I wasn't a fan of their phone case. It was slightly convex in the back to accomodate the locking mechanism and didn't lie flat on other surfaces. I also found it difficult to attach to the quadlock mount at times. These are personal issues I had. Its a well built mount and works well.

 

Yeah I’ve learned to live with the case. As I have the mount on my bike as well. I am still looking into mounts for the 4.

 

OK for you OffRoam guys are you getting the CD clip (pre-19)

https://getoffroam.com/products/phone-mount-kit-toyota-4runner-5th-gen-2014-2019

or the vent clip (10-23)?

https://getoffroam.com/products/phone-mount-kit-toyota-4-runner-2010-2023

Either will work on my 2019 but I am unsure which is better...? Thoughts? I plan on running the phone horizontally on longer drives for mapping and music. I don't use the CD player.

 

I got the 10-23 version because my 22 doesn't have a CD player. I think the 10-23 would be better since it would sit higher on the dashboard for viewing while driving and not block the infotainment screen/buttons.

 

I have the 2014-2019 version and it works well. I considered ordering the 2010-2023 version clamp only to try it out a bit higher up, but have dragged my feet. The difference between the two, as far as I can see, is the 2019 version's clamp uses 2 bolts, the 2023 version's clamp has 1 bolt. Whether that makes a difference, no clue.

 

If you run it horizontal is anything on the radio display, or a significant amount of the vents, covered? It's hard to visualize since no images show it horizontal.

If the phone is horizontal and the mount is on the passenger side is the clock blocked?

 

It doesn't. I have Google Pixel 6 Pro which is 6.45 x 3 inches.

 

Sitting on passenger side it does block it a bit.

 

Does it shake or bounce on the freeway/roads?

 

Haven't experienced any shake or bounce for the 7 months I've had it.

 

You inspired me to get the 2010-2023 dash clamp ordered. They don't list it on their site, you have to contact them; they don't apparently offer the base clamp separately unless you have already ordered the whole unit.

 

Ironically I ordered the other one!

 

The other clamp shows an ETA of Monday, so I'll swap my phone holder to the new clamp then be able to compare the two...

 

The phone mount I’m loving.

 

Do these scratch the vent/trim at all?

 

I realized I never followed up on the new clamp from Offroam. I did end up using the '10-'23 clamp after all, as I like how the phone mounts higher up. I see no measurable difference in the solidity of the newer mount vs the previous version.

 

The Offroam mounts do not. They have an elastomeric (is that a word?) pad on the clamp surfaces that contact the dash to prevent scratches or marks.

 

Yes Sir, that is a word. Elastomerics are used in aviation, for one.

 

After reading this thread, I am grateful I never bought a smartphone. I hardly ever turn on the little flip phone my wife bought for me. It happily sits in the door pocket...forgotten.

 

The install was bit of pain. Will use it for sometime and see how it goes.



https://youtu.be/jTKgEZMAKms

 

Ive been using this one and really like it. The make some with a Qi pad built in as well.

$27 iOttie Easy One Touch 6 Universal Car Mount Dashboard & Windshield Suction Cup Phone Holder for iPhone Samsung, Google, All Smartphones

https://www.amazon.com/dp/B0C1HP8N5D?ref=ppx_yo2ov_dt_b_product_details&th=1