1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Cool write up adding blinker capability to 3rd gen marker housing

Discussion in 'Lighting' started by Erik65, Jun 5, 2017.

  1. Jun 5, 2017 at 10:25 AM
    #1
    Erik65

    Erik65 [OP] New Member

    Joined:
    Oct 7, 2015
    Member:
    #1046
    Messages:
    56
    Gender:
    Male
    Central MA
    Vehicle:
    1998 4Runner SAS trail rig. 2011 Tacoma TX Pro
    Came across this write-up while reading about 3rd gen marker light sockets:

    https://www.yotatech.com/f2/corner-blinkers-96-2002-4runner-tacoma-132967/

    Thought some might be interested here. I am reworking the lights on mine as the conversion to the custom front bumper on mine now eliminated the bumper mount blinker housings. The previous owner converted my markers to combo markers/blinkers by drilling out the small marker socket hole to accomodate the larger blinker socket that has a 2 filament bulb, not sure what I'm going to do next but I do want the stock lights to keep shining
     

Products Discussed in

To Top