1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Improving ability/preventative steps to water ford in a flood

Discussion in '5th Gen 4Runners (2010-2024)' started by Austin26, Oct 5, 2022.

  1. Oct 5, 2022 at 4:31 AM
    #1
    Austin26

    Austin26 [OP] New Member

    Joined:
    Oct 5, 2022
    Member:
    #28940
    Messages:
    180
    Gender:
    Male
    First Name:
    Austin
    Vehicle:
    5th gen ORP
    I'm looking for mild improvements to help with water fording during a flood or emergency, or just minimize the damage afterwards.

    From what I've found here, a differential breather kit and doing what I can to seal up the airbox and piping is a good first step. Do transfer cases have breathers, and hence need one extended as well? I don't need a snorkel and I don't plan to attempt to seal up the engine bay. My thinking is along the lines of "an ounce of prevention is worth a pound of cure."

    After experiencing Hurricane Harvey and another flood event, I would like to be able to have a better chance of keeping my family safe and having the mobility to help others if possible. Thanks!
     
  2. Oct 5, 2022 at 9:59 AM
    #2
    SlvrSlug

    SlvrSlug Slightly bent.

    Joined:
    Jun 3, 2018
    Member:
    #6172
    Messages:
    7,542
    Gender:
    Male
    First Name:
    John
    Ramona Ca.
    Vehicle:
    2017 4-Runner SR-5 P. Kings, Built Right uca’s, Durabumps, RSG sliders
    You may want to research electrical components that would be susceptible to damage, my understanding is that is the first thing to get damaged.
     
    Austin26[OP] likes this.
  3. Oct 5, 2022 at 10:10 AM
    #3
    Overland WT

    Overland WT Grumpy Old Guy

    Joined:
    Jan 24, 2022
    Member:
    #25317
    Messages:
    638
    Gender:
    Male
    First Name:
    Bryan
    West Texas
    Vehicle:
    2017 TRD Off Road
    Many with many more to go
    The factory does a good job of keeping electrical from being damaged if it gets wet. Submerged for a period of time is a different story.

    Rear dif and the locker has a breather as well.

    https://www.youtube.com/watch?v=1MFW8YK9dx0
     
    Austin26[OP] and SlvrSlug like this.
  4. Oct 5, 2022 at 10:50 AM
    #4
    Captain Spalding

    Captain Spalding . . .

    Joined:
    Feb 4, 2022
    Member:
    #25492
    Messages:
    1,620
    Thanks for the video. Interesting that the diff lock has its own breather. Per the video, the list of components with breathers are:
    • Rear differential
    • Rear diff lock (if equipped)
    • Front differential
    • A.D.D.
    • Transfer case
    • Transmission
    In the host’s opinion only the breathers on the rear axle need to be raised.

    In the case of an older car I’d recommend dielectric grease on the electric connections under the hood, but I don’t know if that’s advisable on newer cars with lots of electronics. Maybe someone else could chime in on that.
     
    Overland WT likes this.
  5. Oct 5, 2022 at 8:30 PM
    #5
    McSpazatron

    McSpazatron New Member

    Joined:
    Feb 16, 2021
    Member:
    #19810
    Messages:
    4,612
    Gender:
    Male
    Vehicle:
    2021 4runner OR
    Dobinson IMS Warn Bumper CaliRaised Sliders 285/70 K02s
    I’ve heard that rear diff lock actuators can take on water, leading to failure…so those might be worth doing when relocating the rear diff breather.
     
    Thatbassguy likes this.
  6. Oct 5, 2022 at 8:36 PM
    #6
    McSpazatron

    McSpazatron New Member

    Joined:
    Feb 16, 2021
    Member:
    #19810
    Messages:
    4,612
    Gender:
    Male
    Vehicle:
    2021 4runner OR
    Dobinson IMS Warn Bumper CaliRaised Sliders 285/70 K02s
    I’ve seen some old school videos talking about the importance of technique when fording water. Key among them was maintaining steady forward speed, at the right speed to maintain a good bow wave. A bow wave in front effectively means a lower water level below you. You want to avoid stopping midwater because it’s inviting more risk for water infiltration or damage.
     
  7. Oct 5, 2022 at 8:38 PM
    #7
    McSpazatron

    McSpazatron New Member

    Joined:
    Feb 16, 2021
    Member:
    #19810
    Messages:
    4,612
    Gender:
    Male
    Vehicle:
    2021 4runner OR
    Dobinson IMS Warn Bumper CaliRaised Sliders 285/70 K02s
    Found it!!! I wont give you a timestamp for the water fording section, since the entire video is too good to miss any of it.;)

    https://m.youtube.com/watch?time_continue=383&v=Xz0hN05GyLQ&feature=emb_title
     
  8. Oct 5, 2022 at 10:00 PM
    #8
    whippersnapper02

    whippersnapper02 New Member

    Joined:
    Feb 27, 2019
    Member:
    #8982
    Messages:
    2,044
    Gender:
    Male
    First Name:
    Christian
    Vehicle:
    2019 4Runner TRD Offroad Premium
    Don't think you're going to build a submarine like this guy: https://fb.watch/f_6yog04U4/

    Water will quickly find any hole to pass through so seal them up.
     
  9. Oct 6, 2022 at 4:54 AM
    #9
    Austin26

    Austin26 [OP] New Member

    Joined:
    Oct 5, 2022
    Member:
    #28940
    Messages:
    180
    Gender:
    Male
    First Name:
    Austin
    Vehicle:
    5th gen ORP
    I was searching the internet for the best or a good 4runner forum meaning they had experienced and helpful people and I think I found it here. Thanks for the help, several of you. I didn't know the rear locker could have its own breather. I won't be able to get to these modifications right away but I will be getting a parts list together.
     
  10. Oct 6, 2022 at 10:23 AM
    #10
    Captain Spalding

    Captain Spalding . . .

    Joined:
    Feb 4, 2022
    Member:
    #25492
    Messages:
    1,620
    I located the breathers under the hood. They are all at about the level of the top of the wheel wells. I didn’t find a spec in the manual for maximum recommended fording depth, but I guess the height of the breathers is a good indication.

    There are two beside the fuse box, between the fuse box and the engine. They are silver metal cylinders at the ends of rubber hoses with black braided sheaths. About the size of a 9mm casing. There are two more behind the engine.
     
    McSpazatron likes this.

Products Discussed in

To Top