1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Antenna alternatives?

Discussion in '2nd Gen 4Runners (1990-1995)' started by jennyfantastic, Aug 15, 2022.

  1. Aug 15, 2022 at 6:36 PM
    #1
    jennyfantastic

    jennyfantastic [OP] New Member

    Joined:
    Jul 14, 2022
    Member:
    #27817
    Messages:
    4
    Gender:
    Female
    First Name:
    Jennifer
    Sarasota FL
    Vehicle:
    1995 4x4 Manual 4Runner
    The motor for my antenna kicks on and makes noise but the antenna does not raise or lower. Has anyone replaced or disconnected it and use something newer and shorter? Or is there an easy fix?
     
  2. Aug 16, 2022 at 6:53 AM
    #2
    watermelonman122

    watermelonman122 New Member

    Joined:
    Jul 4, 2020
    Member:
    #15297
    Messages:
    84
    Utah
    Vehicle:
    1994 4Runner SR5 3.4 V6 4wd 5spd
    I hated the telescoping antenna and just wanted a standard whip antenna. The motor worked fine, but a small dent in the antenna meant it didn't go down all the way. So I replaced mine with all of the OEM antenna parts. For the antenna mast, I'd look for one at a junkyard. No way it should cost what they're charging. Just make sure when you pull out the old antenna cable, that you tie a string to it. That will give you something to pull the new antenna cable back through.
    https://parts.toyota.com/p/Radio-Antenna-Mast/63609043/8630948020.html
    https://www.amazon.com/gp/product/B00GKMPXK4?ie=UTF8
     
    jennyfantastic[OP] likes this.
  3. Aug 16, 2022 at 7:09 AM
    #3
    jennyfantastic

    jennyfantastic [OP] New Member

    Joined:
    Jul 14, 2022
    Member:
    #27817
    Messages:
    4
    Gender:
    Female
    First Name:
    Jennifer
    Sarasota FL
    Vehicle:
    1995 4x4 Manual 4Runner
    Thanks! I’ll give it a try!!
     
  4. Aug 20, 2022 at 8:54 AM
    #4
    KRUPP

    KRUPP New Member

    Joined:
    Apr 2, 2021
    Member:
    #20698
    Messages:
    31
    Gender:
    Male
    First Name:
    Kevin
    Vehicle:
    1991 Toyota 4Runner, 3.0, 4wd
    None yet
    Common problem. Just disconnect the wires to the motor and leave the factory mast. You can reach it behind the wheel well liner if you take a few screws out. Remember to push it in/retract before the car wash. Ask me how I know.
     

Products Discussed in

To Top