1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Drove through deep water, now all the warning lights are on...

Discussion in '5th Gen 4Runners (2010-2024)' started by dep4b, Jul 11, 2022.

  1. Jul 11, 2022 at 5:47 AM
    #1
    dep4b

    dep4b [OP] New Member

    Joined:
    Jul 11, 2022
    Member:
    #27770
    Messages:
    2
    Gender:
    Male
    Vehicle:
    2019 Red 4Runner
    My father in law drove through a flooded beach road on the Outer Banks, NC, and while the 4Runner did great, afterwords the Slip indicator AND the check engine light came on....

    No problems in driving it, however how do I get it to reset, or, does it reflect something bad happend to the vehicle? It's a ~2012 4 Runner.

    IMG_9650.jpg
     
    Thatbassguy likes this.
  2. Jul 11, 2022 at 5:54 AM
    #2
    Dabigono

    Dabigono Just Joined

    Joined:
    Dec 24, 2018
    Member:
    #8196
    Messages:
    3,735
    Vehicle:
    2020 4Runner
    You’re gonna have to find out what the malfunction code is. You might have shorted out a sensor or actuator
     
    4runGirl88 and Thatbassguy like this.
  3. Jul 11, 2022 at 10:53 AM
    #3
    Thatbassguy

    Thatbassguy New member? Really??

    Joined:
    Mar 27, 2019
    Member:
    #9314
    Messages:
    12,652
    Gender:
    Male
    First Name:
    James
    S/E Wisconsin
    Vehicle:
    2019 TRDORP, KDSS, MGM
    RSG sliders, Yakima offgrid basket, Pro-Comp wheels, SOS Streamline bumper and skids, Warn VR EVO10S winch + Ultimate Sidewinder, Bilstein 6112 + 5100 + rear lift coils, Rigid Dually SS ditch lights w/Caliraised brackets and OEM style dash switch
    If you just want to reset the computer, disconnect the battery for a half an hour or so. The computer will reset to factory settings. If the lights pop back on again, then you know you have a problem.

    Or, you could take it to an auto parts store and many of them will read the codes for you and reset them.
     
    brownersd, Ironguy and 4runGirl88 like this.
  4. Jul 11, 2022 at 11:06 AM
    #4
    banjos-n-beer

    banjos-n-beer New Member

    Joined:
    Oct 7, 2021
    Member:
    #23686
    Messages:
    677
    Gender:
    Male
    First Name:
    Steve
    Maine
    Vehicle:
    2018 Pro
    how deep was the water? where do you live?

    i'd check the fluids in your Diffs and T-Case. If water got in there thru the breathers you'll want to replace the fluids... especially if you live in a climate where that water could freeze and do irreparable damage those units.
     
    4runGirl88, Dabigono and Thatbassguy like this.
  5. Jul 11, 2022 at 4:30 PM
    #5
    Dabigono

    Dabigono Just Joined

    Joined:
    Dec 24, 2018
    Member:
    #8196
    Messages:
    3,735
    Vehicle:
    2020 4Runner
    X2
     
    DUSTYDOGDAN and Thatbassguy like this.
  6. Jul 11, 2022 at 4:45 PM
    #6
    Captain Spalding

    Captain Spalding . . .

    Joined:
    Feb 4, 2022
    Member:
    #25492
    Messages:
    1,634
    Just out of curiosity, how does one check the fluids for water without draining them?
     
    Bodie the Dog and Thatbassguy like this.
  7. Jul 11, 2022 at 4:49 PM
    #7
    ZebraScissors

    ZebraScissors New Member

    Joined:
    Jun 30, 2022
    Member:
    #27627
    Messages:
    16
    Gender:
    Male
    First Name:
    Drake
    Reno, NV
    Vehicle:
    2018 TRD Pro
    None yet!
    By draining them.
     
  8. Jul 11, 2022 at 4:50 PM
    #8
    McSpazatron

    McSpazatron New Member

    Joined:
    Feb 16, 2021
    Member:
    #19810
    Messages:
    4,735
    Gender:
    Male
    Vehicle:
    2021 4runner OR
    Dobinson IMS Warn Bumper CaliRaised Sliders 285/70 K02s
    you could suck some out through the fill hole. Bu I would just drain the fluid and replace if there was enough suspicion to bother checking. You’re already there anyway.
     
  9. Jul 11, 2022 at 7:06 PM
    #9
    Captain Spalding

    Captain Spalding . . .

    Joined:
    Feb 4, 2022
    Member:
    #25492
    Messages:
    1,634
    Okay. So please clarify, because it seems that what’s being implied is that a fluid change is prudent whenever the vehicle fords anything deep enough to get the axles wet.
     
  10. Jul 11, 2022 at 7:09 PM
    #10
    ZebraScissors

    ZebraScissors New Member

    Joined:
    Jun 30, 2022
    Member:
    #27627
    Messages:
    16
    Gender:
    Male
    First Name:
    Drake
    Reno, NV
    Vehicle:
    2018 TRD Pro
    None yet!
    Anything over the breather can get the diff wet inside. The breather is directly attached to the top of the rear diff. They aren’t designed to be dunked under water unless you have an extended breather.

    Like on my Tacoma, my rear breather is extended and sits behind my driver tail light.

    https://www.northridge4x4.com/part/170112-arb-differential-breather-kit

    This is the location of the rear breather. Mine of course has a hose because it’s re-routed.

    244A39F8-5C1F-4149-8D43-B50350CD1F1F.jpg
     
    onaquest and banjos-n-beer like this.
  11. Jul 11, 2022 at 7:14 PM
    #11
    McSpazatron

    McSpazatron New Member

    Joined:
    Feb 16, 2021
    Member:
    #19810
    Messages:
    4,735
    Gender:
    Male
    Vehicle:
    2021 4runner OR
    Dobinson IMS Warn Bumper CaliRaised Sliders 285/70 K02s
    That breather is maybe 2 to 3 inches higher than the center of the wheelhub. Which is pretty close to the bottom of the body. If you go that deep, you’d be safest draining your rear diff.
     
  12. Jul 11, 2022 at 7:21 PM
    #12
    McSpazatron

    McSpazatron New Member

    Joined:
    Feb 16, 2021
    Member:
    #19810
    Messages:
    4,735
    Gender:
    Male
    Vehicle:
    2021 4runner OR
    Dobinson IMS Warn Bumper CaliRaised Sliders 285/70 K02s
    I should add, the breather is supposed to shut, I think in situations where the diff experiences vacuum (like when a hot diff is cooled by water resulting in a vaccuum inside). So it’s not guaranteed that you would suck in water, and turn your diff oil into mayonnaise. But it’s more about safe than sorry, especially since I think that would be exceeding the maximum fording depth of the 4runner.
     
    banjos-n-beer likes this.
  13. Jul 11, 2022 at 7:36 PM
    #13
    Captain Spalding

    Captain Spalding . . .

    Joined:
    Feb 4, 2022
    Member:
    #25492
    Messages:
    1,634
    Okay. This mostly lines up with my prior knowledge. My understanding is that the water doesn’t get into the diff through the diff breather. It gets sucked in through the axle seals when a hot axle is suddenly doused with cold water. The purpose of the diff breather is to prevent the vacuum that sucks water in past the axle seals. The diff breather closes when the breather itself is submerged, so that water doesn’t just pour into the diff. I think it takes a long and deep bit of wading to contaminate the gear oil.
     
  14. Jul 11, 2022 at 8:39 PM
    #14
    MeefZah

    MeefZah ------------

    Joined:
    Nov 1, 2015
    Member:
    #1122
    Messages:
    2,611
    Gender:
    Male
    First Name:
    Mark
    Lexington, Ohio
    Vehicle:
    '24 ORP
    Oy, Cap'n: I have gotten wetter than many in various crossings, and when I changed my diff oil after multiple dozens of river fords there was no evidence of water contamination. I don't have any breather mods. Personally, I rate this concern of water intrusion to be not a worry... though obviously opinions vary.

    https://youtu.be/-fVw9N4T6aI
     
  15. Jul 11, 2022 at 8:47 PM
    #15
    Captain Spalding

    Captain Spalding . . .

    Joined:
    Feb 4, 2022
    Member:
    #25492
    Messages:
    1,634
    My prior vehicles, a 1985 G-Wagen and a 1997 Defender, both had remote breathers from the factory. So this is the first time I’ve had to really think about it beyond the theoretical.

    Nice crossing by the way. I saw that video in another thread, along with a video about plumbing one’s own remote breathers. Interesting that the threads on the stock breathers are BST.
     
    Last edited: Jul 11, 2022
  16. Jul 12, 2022 at 3:48 AM
    #16
    banjos-n-beer

    banjos-n-beer New Member

    Joined:
    Oct 7, 2021
    Member:
    #23686
    Messages:
    677
    Gender:
    Male
    First Name:
    Steve
    Maine
    Vehicle:
    2018 Pro
    yeah, i doubt its common, but it did happen to a guy with his CX5, and the crossing was no more than 7" or 8" deep. obviously different vehicles, but the science behind it happening is still the same, and swapping out the fluid is cheap insurance.
     
  17. Jul 12, 2022 at 5:25 AM
    #17
    Thatbassguy

    Thatbassguy New member? Really??

    Joined:
    Mar 27, 2019
    Member:
    #9314
    Messages:
    12,652
    Gender:
    Male
    First Name:
    James
    S/E Wisconsin
    Vehicle:
    2019 TRDORP, KDSS, MGM
    RSG sliders, Yakima offgrid basket, Pro-Comp wheels, SOS Streamline bumper and skids, Warn VR EVO10S winch + Ultimate Sidewinder, Bilstein 6112 + 5100 + rear lift coils, Rigid Dually SS ditch lights w/Caliraised brackets and OEM style dash switch
    I agree that it worth checking, or just changing the differential fluid to be safe.

    I'll have to see how mine looks the next time I change it, as I also tend to practice proper driving technique at times. No breather mod... yet.

    Screenshot_20220712-071123~2.jpg


    Screenshot_20220618-070051~3.jpg
     
  18. Jul 12, 2022 at 4:12 PM
    #18
    Tmiesowicz

    Tmiesowicz New Member

    Joined:
    Dec 30, 2021
    Member:
    #24881
    Messages:
    1,254
    Gender:
    Male
    The better half of New York
    Vehicle:
    2022 sr5 premium 4x4 (sold) 2022 ram classic tradesman 5.7L 4x4 (current)
    nice!
     

Products Discussed in

To Top