Show us your rack!

I had too many wires to fit down the channels along side the windshield. So I just ran them straight out the back and down along the hatch seal. Then behind the taillights, under the truck and along the frame rail, then up into the engine bay.

 

Definitely a keeper

 

Do you guys know if I can apply loctite to all the bolts when install the Prinsu, sherpa, etc modular roof rack system?
The installation guides never call for any loctite but say do check the torque every 1000 miles.

I'm planning to install it to my sister's truck, and I don't see her ever going to check the rack or torque the bolts. Maybe locking the threads is a good approach if she never plans on touching or uninstalling it?

 

Use Blue loctite, its not permanent.

 

Here's mine.

 

Number 242 or 243 is what you need (both blue). Made for assemblies that need to come back apart at times. Medium strength. There are other designations (also blue) that may not be appropriate here.

Not trying for pedantry, just have used a lot of threadlockers in motorcycle and engine building and I thought I'd chime in.

Jason

 

Five pages into this thread and no love for the RCI rack, until now

 

That’s not a legal Gag anymore.

 

Bajarack mesh floor with sunroof cutout.

Decent article comparing brands

https://trail4runner.com/2017/12/04/5th-gen-4runner-roof-racks/

 

I can not decide between these two right now but need to soon. Love the mounting of the Sherpa but would like to support a local company in Westcott

 

Gobi Rack and ladder

 

Hope this counts.

 

If you are local like me then the choice is easy go with Westcott!!!! Jeff and his team are top notch. Well worth the wait my friend.

 

DAMN. Just spent the first hour of work looking through this thread. Not sure what to say but just to tip my hat good sir!

 

You did go on to #134, right?lol

 

Excellent shot arrangement and positioning!

 

2 questions for ya, 1. which thule model did you get? I tried to fit one on the oem cross bars with the TRD Pro rack and it didn't work out. 2. Did you ever install the awning? If so pics?

 

My Rola basket came today. It's more substantial than I expected, but it has a lot of bad welds. They're all strong enough, but there gaps that would allow moisture intrusion. I had already planned to sand and paint it, but in between those steps, I think I'll clean up some bad spots with JB Weld. If I had the skills and tools, I'd do some real welding, as others have posted, but not for this project.

 

Just brought mine home from dealership 2 days ago, I will be removing the one from the dealer .. Have been researching the best roof racks.. Clearly there are a lot to pick from.. What I would like.. is to find one that is Well Built and semi easy to install. I have a Tepui rooftop tent so I would like one that I can Easily attach the tent off and on with just me and another friend helping.. So would also like to find the best quick release for that..
1. Frontrunner?
2. Westcott?
3. Prinsue?

Anyone else have another I should check out?

 

nFab

 

reviving an older post. Curious what rack is that? Been meaning to find out which ones would handle Thule hullavator - this is the first example I can find.
Looks like Gobi?

 

it absolutely counts as two!

 

For all the gobi racks.
I know the rack has the wind faring and a clear vinyl type strip that that gets added for protection, has anyone noticed any wearing through that and into the paint? How tight did you mount the faring to the body?

 

how did you mount the case to the rack? i am looking at doing a similar setup. TIA!

 

I haven't had any rubbing through the vinyl tape.

The faring has a rubber gasket on the bottom that is in contact with the vinyl tape.......so it's not just a hard plastic faring rubbing against the tape.

 

Westcott. Fully loaded.

 

Funny thing you should bring that up. I got to put it back on the roof. Rack again as I took it off so I could put my Yakima rack up there.

When I install it up there I will take pictures.