1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

4Runner Fun Build

Discussion in '5th Gen Builds (2010-2024)' started by GrantA, Jul 7, 2021.

  1. Nov 2, 2021 at 9:02 PM
    #31
    Mtbpsych

    Mtbpsych New Member

    Joined:
    Dec 3, 2018
    Member:
    #7922
    Messages:
    1,887
    Gender:
    Male
    Vehicle:
    2018 SR5
    I’m shopping for a front bumper, and yours looks almost exactly like C4’s hybrid. Was it recommended you remove the front power steering steel lines that go in front of the condenser? It doesn’t look hard to do, but I’d rather not tamper with it and it looks like you kept your OEM setup.
     
  2. Nov 3, 2021 at 3:56 AM
    #32
    GrantA

    GrantA [OP] Enjoying God’s creation

    Joined:
    May 25, 2020
    Member:
    #14533
    Messages:
    1,320
    Gender:
    Male
    North Carolina
    Vehicle:
    Fully locked 2020 SR5 Premium
    - GOBI roof rack and ladder - Westcott Design Rock sliders - M.O.R.E. Underbody Skid plates - Dual ARB air compressor & ARB single compressor - LED interior lighting - Ironman 2.0 meter awning and enclosure - Ironman winch with factor55 hook - Ironman foam cell pro suspension - Ironman recovery snatch rope - Ironman recovery traction boards - lilbscustomfab Hybrid Front Bumper - lilbscustomfab BMC - RRW RR7-H Hybrid Beadlock wheels - Nitto Trail Grapplers 285/75/17 M/T - 4.88 gears - ARB front air locker - ARB rear air locker - Hi-lift jack & mount - Sony aftermarket speakers - LASFIT External LED Light Conversion - Center console organizer - Glovebox organizer - ICS phone Mount holder - C4 rear bumper with dual swing arms - C4 gas skid plate - C4 rear diff skid plates
    It is pretty close to the C4 hybrid. I didn’t have to do a thing except cut the factory front bumper. I didn’t have to modify or touch the front steering lines at all. I did keep my OEM setup for the power steering.
     
    Mtbpsych[QUOTED] likes this.
  3. Nov 3, 2021 at 9:02 AM
    #33
    Rupp1

    Rupp1 New Member

    Joined:
    Oct 25, 2021
    Member:
    #23959
    Messages:
    139
    Gender:
    Male
    NC
    Vehicle:
    2017 SR5 Premium RWD Starlight Black
    Very nicely done. :101010:
     
    GrantA[OP] likes this.
  4. Nov 17, 2021 at 4:02 PM
    #34
    ha y n

    ha y n New Member

    Joined:
    Jun 28, 2021
    Member:
    #22126
    Messages:
    24
    Gender:
    Male
    Vehicle:
    2021 SR5 white
    INT Diode Dynamics LED's LFD Crossbars Nfab Predator Pro Pedal Commander Weather Tech everything Amazon glovebox shelf/center console organizer *ICS dashmount on the way (Ram-mount on the way)
    how are you liking that V700? Do you feel it will last a long time?
     
  5. Nov 17, 2021 at 5:07 PM
    #35
    GrantA

    GrantA [OP] Enjoying God’s creation

    Joined:
    May 25, 2020
    Member:
    #14533
    Messages:
    1,320
    Gender:
    Male
    North Carolina
    Vehicle:
    Fully locked 2020 SR5 Premium
    - GOBI roof rack and ladder - Westcott Design Rock sliders - M.O.R.E. Underbody Skid plates - Dual ARB air compressor & ARB single compressor - LED interior lighting - Ironman 2.0 meter awning and enclosure - Ironman winch with factor55 hook - Ironman foam cell pro suspension - Ironman recovery snatch rope - Ironman recovery traction boards - lilbscustomfab Hybrid Front Bumper - lilbscustomfab BMC - RRW RR7-H Hybrid Beadlock wheels - Nitto Trail Grapplers 285/75/17 M/T - 4.88 gears - ARB front air locker - ARB rear air locker - Hi-lift jack & mount - Sony aftermarket speakers - LASFIT External LED Light Conversion - Center console organizer - Glovebox organizer - ICS phone Mount holder - C4 rear bumper with dual swing arms - C4 gas skid plate - C4 rear diff skid plates
    Oh yeah. It is doing great. No problems and it has been dry as a bone so far even in all the rain. Really happy I have it.
     
  6. Dec 26, 2021 at 6:39 PM
    #36
    GrantA

    GrantA [OP] Enjoying God’s creation

    Joined:
    May 25, 2020
    Member:
    #14533
    Messages:
    1,320
    Gender:
    Male
    North Carolina
    Vehicle:
    Fully locked 2020 SR5 Premium
    - GOBI roof rack and ladder - Westcott Design Rock sliders - M.O.R.E. Underbody Skid plates - Dual ARB air compressor & ARB single compressor - LED interior lighting - Ironman 2.0 meter awning and enclosure - Ironman winch with factor55 hook - Ironman foam cell pro suspension - Ironman recovery snatch rope - Ironman recovery traction boards - lilbscustomfab Hybrid Front Bumper - lilbscustomfab BMC - RRW RR7-H Hybrid Beadlock wheels - Nitto Trail Grapplers 285/75/17 M/T - 4.88 gears - ARB front air locker - ARB rear air locker - Hi-lift jack & mount - Sony aftermarket speakers - LASFIT External LED Light Conversion - Center console organizer - Glovebox organizer - ICS phone Mount holder - C4 rear bumper with dual swing arms - C4 gas skid plate - C4 rear diff skid plates
    Ordered the C4 rear bumper about a month ago and looking forward to that coming in at the end of January. I got the double swing. I also have the C4 rear diff skid and the C4 gas skid at the same time. Super pumped about getting that but was bummed because it weighs a bit more than I wanted. Guess the kids will have to ride in the trailer ;). jk obviously.
     
    2Toys likes this.
  7. Jan 2, 2022 at 2:29 PM
    #37
    GrantA

    GrantA [OP] Enjoying God’s creation

    Joined:
    May 25, 2020
    Member:
    #14533
    Messages:
    1,320
    Gender:
    Male
    North Carolina
    Vehicle:
    Fully locked 2020 SR5 Premium
    - GOBI roof rack and ladder - Westcott Design Rock sliders - M.O.R.E. Underbody Skid plates - Dual ARB air compressor & ARB single compressor - LED interior lighting - Ironman 2.0 meter awning and enclosure - Ironman winch with factor55 hook - Ironman foam cell pro suspension - Ironman recovery snatch rope - Ironman recovery traction boards - lilbscustomfab Hybrid Front Bumper - lilbscustomfab BMC - RRW RR7-H Hybrid Beadlock wheels - Nitto Trail Grapplers 285/75/17 M/T - 4.88 gears - ARB front air locker - ARB rear air locker - Hi-lift jack & mount - Sony aftermarket speakers - LASFIT External LED Light Conversion - Center console organizer - Glovebox organizer - ICS phone Mount holder - C4 rear bumper with dual swing arms - C4 gas skid plate - C4 rear diff skid plates
    Hey all… you all have been really helpful so I figured I would take it to the forum… any ideas how to remedy this situation???
    BA1832AD-0063-4F9A-BDD2-9456E486C820.jpg DB20D8A7-3B32-44D0-82F4-1D5D4BC49DA8.jpg
    The above is the front of my Yakima Skybox unit and you can see a big gap. The last time we used this we went through an epic rainstorm/tornado warning in Texas and when we opened it everything was soaking wet (I thought ahead and already had everything vacuum packed so our stuff was actually dry because of that but I would rather that not happened in the first place. Trying to get ideas in correcting this big gap then I want to put a rubber seal around the entire lip. Kinda bummed because I spent a good amount of money on this used unit and it is too late to get my money back.

    Inside the Skybox (wife locked me in but finally got me out) you can see the difference…

    Inside looking out the front:
    B440A013-3780-477A-A349-D415E3EE231E.jpg
    looking at the side by the locks where it is tight:
    5CD0F08E-0353-4CF0-9D8E-1636625CB5C9.jpg
     
    Last edited: Jan 2, 2022
  8. Jan 4, 2022 at 8:02 AM
    #38
    SlvrSlug

    SlvrSlug Slightly bent.

    Joined:
    Jun 3, 2018
    Member:
    #6172
    Messages:
    7,542
    Gender:
    Male
    First Name:
    John
    Ramona Ca.
    Vehicle:
    2017 4-Runner SR-5 P. Kings, Built Right uca’s, Durabumps, RSG sliders
    Just thinking out loud here, but maybe try a heat gun on the lid to see if you can shape it back in place.
     
    GrantA[OP] likes this.
  9. Jan 4, 2022 at 8:42 AM
    #39
    GrantA

    GrantA [OP] Enjoying God’s creation

    Joined:
    May 25, 2020
    Member:
    #14533
    Messages:
    1,320
    Gender:
    Male
    North Carolina
    Vehicle:
    Fully locked 2020 SR5 Premium
    - GOBI roof rack and ladder - Westcott Design Rock sliders - M.O.R.E. Underbody Skid plates - Dual ARB air compressor & ARB single compressor - LED interior lighting - Ironman 2.0 meter awning and enclosure - Ironman winch with factor55 hook - Ironman foam cell pro suspension - Ironman recovery snatch rope - Ironman recovery traction boards - lilbscustomfab Hybrid Front Bumper - lilbscustomfab BMC - RRW RR7-H Hybrid Beadlock wheels - Nitto Trail Grapplers 285/75/17 M/T - 4.88 gears - ARB front air locker - ARB rear air locker - Hi-lift jack & mount - Sony aftermarket speakers - LASFIT External LED Light Conversion - Center console organizer - Glovebox organizer - ICS phone Mount holder - C4 rear bumper with dual swing arms - C4 gas skid plate - C4 rear diff skid plates
    I will give this another go and see what happens. Just waiting now to hear from Yakima and see what they suggest. I will share what I find out but I am not holding my breath since I am not under warranty
     
  10. Jan 11, 2022 at 5:07 PM
    #40
    GrantA

    GrantA [OP] Enjoying God’s creation

    Joined:
    May 25, 2020
    Member:
    #14533
    Messages:
    1,320
    Gender:
    Male
    North Carolina
    Vehicle:
    Fully locked 2020 SR5 Premium
    - GOBI roof rack and ladder - Westcott Design Rock sliders - M.O.R.E. Underbody Skid plates - Dual ARB air compressor & ARB single compressor - LED interior lighting - Ironman 2.0 meter awning and enclosure - Ironman winch with factor55 hook - Ironman foam cell pro suspension - Ironman recovery snatch rope - Ironman recovery traction boards - lilbscustomfab Hybrid Front Bumper - lilbscustomfab BMC - RRW RR7-H Hybrid Beadlock wheels - Nitto Trail Grapplers 285/75/17 M/T - 4.88 gears - ARB front air locker - ARB rear air locker - Hi-lift jack & mount - Sony aftermarket speakers - LASFIT External LED Light Conversion - Center console organizer - Glovebox organizer - ICS phone Mount holder - C4 rear bumper with dual swing arms - C4 gas skid plate - C4 rear diff skid plates
    I got the call today from C4 about my rear bumper being assembled along with my gas skid and diff skid plate. They estimated about 2 weeks I should have it. It will be at the powder coat shop and then I get to look forward to a “fun install”. Just to clarify the rear bumper does not look fun to install.
     
  11. Jan 18, 2022 at 6:48 AM
    #41
    fffffff

    fffffff New Member

    Joined:
    Jul 13, 2021
    Member:
    #22329
    Messages:
    25
    Gender:
    Male
    Great build so far!
     
    GrantA[OP] likes this.
  12. Jan 28, 2022 at 3:21 PM
    #42
    GrantA

    GrantA [OP] Enjoying God’s creation

    Joined:
    May 25, 2020
    Member:
    #14533
    Messages:
    1,320
    Gender:
    Male
    North Carolina
    Vehicle:
    Fully locked 2020 SR5 Premium
    - GOBI roof rack and ladder - Westcott Design Rock sliders - M.O.R.E. Underbody Skid plates - Dual ARB air compressor & ARB single compressor - LED interior lighting - Ironman 2.0 meter awning and enclosure - Ironman winch with factor55 hook - Ironman foam cell pro suspension - Ironman recovery snatch rope - Ironman recovery traction boards - lilbscustomfab Hybrid Front Bumper - lilbscustomfab BMC - RRW RR7-H Hybrid Beadlock wheels - Nitto Trail Grapplers 285/75/17 M/T - 4.88 gears - ARB front air locker - ARB rear air locker - Hi-lift jack & mount - Sony aftermarket speakers - LASFIT External LED Light Conversion - Center console organizer - Glovebox organizer - ICS phone Mount holder - C4 rear bumper with dual swing arms - C4 gas skid plate - C4 rear diff skid plates
    C4 bumper with swing outs and other parts have completed powder coating today. Got the gas skid, and rear diff skid as well and I installed those parts. Almost done with my build.

    All wrapped up:
    40D32C80-5D8E-463F-B751-3B823F8833D7.jpg

    Unwrapped (oh boy there are a few parts):
    44571FED-0536-421B-88EE-52745093FA95.jpg

    Gas skid:
    073D2016-96C6-4839-90B4-AA6C4CF058B7.jpg

    Diff skid:
    3BE1D37A-959A-40C9-B37D-9D999BC3C9BD.jpg
     
  13. Jan 31, 2022 at 4:11 AM
    #43
    GrantA

    GrantA [OP] Enjoying God’s creation

    Joined:
    May 25, 2020
    Member:
    #14533
    Messages:
    1,320
    Gender:
    Male
    North Carolina
    Vehicle:
    Fully locked 2020 SR5 Premium
    - GOBI roof rack and ladder - Westcott Design Rock sliders - M.O.R.E. Underbody Skid plates - Dual ARB air compressor & ARB single compressor - LED interior lighting - Ironman 2.0 meter awning and enclosure - Ironman winch with factor55 hook - Ironman foam cell pro suspension - Ironman recovery snatch rope - Ironman recovery traction boards - lilbscustomfab Hybrid Front Bumper - lilbscustomfab BMC - RRW RR7-H Hybrid Beadlock wheels - Nitto Trail Grapplers 285/75/17 M/T - 4.88 gears - ARB front air locker - ARB rear air locker - Hi-lift jack & mount - Sony aftermarket speakers - LASFIT External LED Light Conversion - Center console organizer - Glovebox organizer - ICS phone Mount holder - C4 rear bumper with dual swing arms - C4 gas skid plate - C4 rear diff skid plates
    Finished installing the swing arms on the 4Runner. I still have to finish the license plate light and the rear backup camera but saving that for another time.

    Measurements for bumper install (Bottom of fender to ground):
    Pre bumper:
    Driver: 39.75”
    Passenger: 40.63”

    Post bumper:
    Driver: 38.94”
    Passenger: 39.75”

    [​IMG][​IMG]
     
  14. Jan 31, 2022 at 7:19 AM
    #44
    Dabigono

    Dabigono Just Joined

    Joined:
    Dec 24, 2018
    Member:
    #8196
    Messages:
    3,649
    Vehicle:
    2020 4Runner
    Wow! ^^^

    Going over the top!

    Can you post some pics of how your whole trucking is looking today ???
     
    Thatbassguy likes this.
  15. Jan 31, 2022 at 7:47 AM
    #45
    GrantA

    GrantA [OP] Enjoying God’s creation

    Joined:
    May 25, 2020
    Member:
    #14533
    Messages:
    1,320
    Gender:
    Male
    North Carolina
    Vehicle:
    Fully locked 2020 SR5 Premium
    - GOBI roof rack and ladder - Westcott Design Rock sliders - M.O.R.E. Underbody Skid plates - Dual ARB air compressor & ARB single compressor - LED interior lighting - Ironman 2.0 meter awning and enclosure - Ironman winch with factor55 hook - Ironman foam cell pro suspension - Ironman recovery snatch rope - Ironman recovery traction boards - lilbscustomfab Hybrid Front Bumper - lilbscustomfab BMC - RRW RR7-H Hybrid Beadlock wheels - Nitto Trail Grapplers 285/75/17 M/T - 4.88 gears - ARB front air locker - ARB rear air locker - Hi-lift jack & mount - Sony aftermarket speakers - LASFIT External LED Light Conversion - Center console organizer - Glovebox organizer - ICS phone Mount holder - C4 rear bumper with dual swing arms - C4 gas skid plate - C4 rear diff skid plates
    My whole trucking? Can you elaborate? Happy to help get what your seeking.
     
    Thatbassguy likes this.
  16. Jan 31, 2022 at 10:10 AM
    #46
    Thatbassguy

    Thatbassguy New member? Really??

    Joined:
    Mar 27, 2019
    Member:
    #9314
    Messages:
    12,412
    Gender:
    Male
    First Name:
    James
    S/E Wisconsin
    Vehicle:
    2019 TRDORP, KDSS, MGM
    RSG sliders, Yakima offgrid basket, Pro-Comp wheels, SOS Streamline bumper and skids, Warn VR EVO10S winch + Ultimate Sidewinder, Bilstein 6112 + 5100 + rear lift coils, Rigid Dually SS ditch lights w/Caliraised brackets and OEM style dash switch
    Damn, that's sexy!
     
    GrantA[QUOTED][OP] likes this.
  17. Jan 31, 2022 at 12:03 PM
    #47
    GrantA

    GrantA [OP] Enjoying God’s creation

    Joined:
    May 25, 2020
    Member:
    #14533
    Messages:
    1,320
    Gender:
    Male
    North Carolina
    Vehicle:
    Fully locked 2020 SR5 Premium
    - GOBI roof rack and ladder - Westcott Design Rock sliders - M.O.R.E. Underbody Skid plates - Dual ARB air compressor & ARB single compressor - LED interior lighting - Ironman 2.0 meter awning and enclosure - Ironman winch with factor55 hook - Ironman foam cell pro suspension - Ironman recovery snatch rope - Ironman recovery traction boards - lilbscustomfab Hybrid Front Bumper - lilbscustomfab BMC - RRW RR7-H Hybrid Beadlock wheels - Nitto Trail Grapplers 285/75/17 M/T - 4.88 gears - ARB front air locker - ARB rear air locker - Hi-lift jack & mount - Sony aftermarket speakers - LASFIT External LED Light Conversion - Center console organizer - Glovebox organizer - ICS phone Mount holder - C4 rear bumper with dual swing arms - C4 gas skid plate - C4 rear diff skid plates
    Thank you @Thatbassguy can’t wait for you to see it
     
    Thatbassguy[QUOTED] likes this.
  18. Jan 31, 2022 at 12:46 PM
    #48
    peter2772000

    peter2772000 New Member

    Joined:
    Feb 26, 2020
    Member:
    #13300
    Messages:
    433
    Gender:
    Male
    First Name:
    Peter
    Montreal/Cape Coral
    Vehicle:
    2019 TRD Pro
    GTR high and low beams, Victory rear carrier, remote oil filter, Dimple magnetic oil pan plug, interior LED lights, T9 radio, driver side grab handle, 305/50R20 Grabber A/TX on Helo 20 x 9's
    Nice!!!
     
    GrantA[OP] likes this.
  19. Feb 13, 2022 at 6:31 PM
    #49
    Toyota.ARK

    Toyota.ARK New Member

    Joined:
    Feb 17, 2021
    Member:
    #20194
    Messages:
    133
    Gender:
    Male
    Vehicle:
    2021 Magnetic Gray TRD-ORP
    Okay, what color/finish are the relation race wheels? I must of missed it in plain sight. Great looking rig btw.
     
    GrantA[OP] likes this.
  20. Feb 13, 2022 at 7:05 PM
    #50
    GrantA

    GrantA [OP] Enjoying God’s creation

    Joined:
    May 25, 2020
    Member:
    #14533
    Messages:
    1,320
    Gender:
    Male
    North Carolina
    Vehicle:
    Fully locked 2020 SR5 Premium
    - GOBI roof rack and ladder - Westcott Design Rock sliders - M.O.R.E. Underbody Skid plates - Dual ARB air compressor & ARB single compressor - LED interior lighting - Ironman 2.0 meter awning and enclosure - Ironman winch with factor55 hook - Ironman foam cell pro suspension - Ironman recovery snatch rope - Ironman recovery traction boards - lilbscustomfab Hybrid Front Bumper - lilbscustomfab BMC - RRW RR7-H Hybrid Beadlock wheels - Nitto Trail Grapplers 285/75/17 M/T - 4.88 gears - ARB front air locker - ARB rear air locker - Hi-lift jack & mount - Sony aftermarket speakers - LASFIT External LED Light Conversion - Center console organizer - Glovebox organizer - ICS phone Mount holder - C4 rear bumper with dual swing arms - C4 gas skid plate - C4 rear diff skid plates
    They are the Matte Gunmetal. Thank you for the feedback btw. We really like it as well and are happy with it.
     
  21. Feb 16, 2022 at 7:34 AM
    #51
    NaturalNativ

    NaturalNativ New Member

    Joined:
    Feb 8, 2022
    Member:
    #25557
    Messages:
    30
    Gender:
    Male
    First Name:
    Marcus
    Vehicle:
    20 T4R SR5 Foam Cell
    Lol did you actually crawl inside the box to take the picture??
     
  22. Feb 16, 2022 at 7:44 AM
    #52
    GrantA

    GrantA [OP] Enjoying God’s creation

    Joined:
    May 25, 2020
    Member:
    #14533
    Messages:
    1,320
    Gender:
    Male
    North Carolina
    Vehicle:
    Fully locked 2020 SR5 Premium
    - GOBI roof rack and ladder - Westcott Design Rock sliders - M.O.R.E. Underbody Skid plates - Dual ARB air compressor & ARB single compressor - LED interior lighting - Ironman 2.0 meter awning and enclosure - Ironman winch with factor55 hook - Ironman foam cell pro suspension - Ironman recovery snatch rope - Ironman recovery traction boards - lilbscustomfab Hybrid Front Bumper - lilbscustomfab BMC - RRW RR7-H Hybrid Beadlock wheels - Nitto Trail Grapplers 285/75/17 M/T - 4.88 gears - ARB front air locker - ARB rear air locker - Hi-lift jack & mount - Sony aftermarket speakers - LASFIT External LED Light Conversion - Center console organizer - Glovebox organizer - ICS phone Mount holder - C4 rear bumper with dual swing arms - C4 gas skid plate - C4 rear diff skid plates
    Yes I did and my wife closed me in and couldn’t open it back up. I was stuck in there for a good 3-5 minutes until she figured it out. I bet she enjoyed that.
     
  23. Feb 16, 2022 at 9:01 AM
    #53
    NaturalNativ

    NaturalNativ New Member

    Joined:
    Feb 8, 2022
    Member:
    #25557
    Messages:
    30
    Gender:
    Male
    First Name:
    Marcus
    Vehicle:
    20 T4R SR5 Foam Cell
    I'm surprised you fit in there. No more getting the trunk area all dirty from hauling bodies now! hahaha sorry to derail your thread. Love the build.
     
  24. Feb 16, 2022 at 9:45 AM
    #54
    GrantA

    GrantA [OP] Enjoying God’s creation

    Joined:
    May 25, 2020
    Member:
    #14533
    Messages:
    1,320
    Gender:
    Male
    North Carolina
    Vehicle:
    Fully locked 2020 SR5 Premium
    - GOBI roof rack and ladder - Westcott Design Rock sliders - M.O.R.E. Underbody Skid plates - Dual ARB air compressor & ARB single compressor - LED interior lighting - Ironman 2.0 meter awning and enclosure - Ironman winch with factor55 hook - Ironman foam cell pro suspension - Ironman recovery snatch rope - Ironman recovery traction boards - lilbscustomfab Hybrid Front Bumper - lilbscustomfab BMC - RRW RR7-H Hybrid Beadlock wheels - Nitto Trail Grapplers 285/75/17 M/T - 4.88 gears - ARB front air locker - ARB rear air locker - Hi-lift jack & mount - Sony aftermarket speakers - LASFIT External LED Light Conversion - Center console organizer - Glovebox organizer - ICS phone Mount holder - C4 rear bumper with dual swing arms - C4 gas skid plate - C4 rear diff skid plates
    Oh the skybox I have is HUGE. I had no problem fitting. With a proper placement you could fit 2 people in it. Thank you for the feedback as well.
     
    Last edited: Feb 16, 2022
  25. Feb 18, 2022 at 4:59 AM
    #55
    DRobs

    DRobs New Member

    Joined:
    Jan 5, 2019
    Member:
    #8335
    Messages:
    1,297
    Gender:
    Male
    First Name:
    Dan
    Missouri Ozarks
    Vehicle:
    2019 TRD OR - MGM
    Pinstripes, lots of em. Plus a couple dents.
    Awesome build!
     
    GrantA[OP] likes this.
  26. Feb 18, 2022 at 5:03 AM
    #56
    GrantA

    GrantA [OP] Enjoying God’s creation

    Joined:
    May 25, 2020
    Member:
    #14533
    Messages:
    1,320
    Gender:
    Male
    North Carolina
    Vehicle:
    Fully locked 2020 SR5 Premium
    - GOBI roof rack and ladder - Westcott Design Rock sliders - M.O.R.E. Underbody Skid plates - Dual ARB air compressor & ARB single compressor - LED interior lighting - Ironman 2.0 meter awning and enclosure - Ironman winch with factor55 hook - Ironman foam cell pro suspension - Ironman recovery snatch rope - Ironman recovery traction boards - lilbscustomfab Hybrid Front Bumper - lilbscustomfab BMC - RRW RR7-H Hybrid Beadlock wheels - Nitto Trail Grapplers 285/75/17 M/T - 4.88 gears - ARB front air locker - ARB rear air locker - Hi-lift jack & mount - Sony aftermarket speakers - LASFIT External LED Light Conversion - Center console organizer - Glovebox organizer - ICS phone Mount holder - C4 rear bumper with dual swing arms - C4 gas skid plate - C4 rear diff skid plates
    Thank you.
     
    DRobs[QUOTED] likes this.
  27. Feb 22, 2022 at 5:23 PM
    #57
    McSpazatron

    McSpazatron New Member

    Joined:
    Feb 16, 2021
    Member:
    #19810
    Messages:
    4,612
    Gender:
    Male
    Vehicle:
    2021 4runner OR
    Dobinson IMS Warn Bumper CaliRaised Sliders 285/70 K02s
    Wow man, that looks fantastic! Any more pics from the front and sides with how it currently sits?
     
  28. Feb 22, 2022 at 6:05 PM
    #58
    GrantA

    GrantA [OP] Enjoying God’s creation

    Joined:
    May 25, 2020
    Member:
    #14533
    Messages:
    1,320
    Gender:
    Male
    North Carolina
    Vehicle:
    Fully locked 2020 SR5 Premium
    - GOBI roof rack and ladder - Westcott Design Rock sliders - M.O.R.E. Underbody Skid plates - Dual ARB air compressor & ARB single compressor - LED interior lighting - Ironman 2.0 meter awning and enclosure - Ironman winch with factor55 hook - Ironman foam cell pro suspension - Ironman recovery snatch rope - Ironman recovery traction boards - lilbscustomfab Hybrid Front Bumper - lilbscustomfab BMC - RRW RR7-H Hybrid Beadlock wheels - Nitto Trail Grapplers 285/75/17 M/T - 4.88 gears - ARB front air locker - ARB rear air locker - Hi-lift jack & mount - Sony aftermarket speakers - LASFIT External LED Light Conversion - Center console organizer - Glovebox organizer - ICS phone Mount holder - C4 rear bumper with dual swing arms - C4 gas skid plate - C4 rear diff skid plates
    No but I can surely get some. I plan on doing a rig walk around video at some point and posting it up on YouTube.
     
  29. Apr 18, 2022 at 4:50 AM
    #59
    GrantA

    GrantA [OP] Enjoying God’s creation

    Joined:
    May 25, 2020
    Member:
    #14533
    Messages:
    1,320
    Gender:
    Male
    North Carolina
    Vehicle:
    Fully locked 2020 SR5 Premium
    - GOBI roof rack and ladder - Westcott Design Rock sliders - M.O.R.E. Underbody Skid plates - Dual ARB air compressor & ARB single compressor - LED interior lighting - Ironman 2.0 meter awning and enclosure - Ironman winch with factor55 hook - Ironman foam cell pro suspension - Ironman recovery snatch rope - Ironman recovery traction boards - lilbscustomfab Hybrid Front Bumper - lilbscustomfab BMC - RRW RR7-H Hybrid Beadlock wheels - Nitto Trail Grapplers 285/75/17 M/T - 4.88 gears - ARB front air locker - ARB rear air locker - Hi-lift jack & mount - Sony aftermarket speakers - LASFIT External LED Light Conversion - Center console organizer - Glovebox organizer - ICS phone Mount holder - C4 rear bumper with dual swing arms - C4 gas skid plate - C4 rear diff skid plates
    While not a rig walk around this is the 4Runner performing 2 recoveries. First time putting the C4 rear bumper to use.

    https://youtu.be/cN3s4X3-A3M

    I should have done a rig walk around at the beach but honestly I didn’t think of it until after I got off the beach.
     
  30. Nov 21, 2022 at 8:53 AM
    #60
    BigDgak

    BigDgak New Member

    Joined:
    Sep 3, 2021
    Member:
    #23169
    Messages:
    17
    Gender:
    Male
    First Name:
    Jack
    Minnesota
    Vehicle:
    2021 TRD Off Road Premium
    Did you install your front bumper yourself? I'm seriously considering the same lil b fab bumper, but they recommend getting it professionally installed due to the weight. Also, did you get the bumper with the full height bar?

    Thanks,
    Dakka
     

Products Discussed in

To Top