1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Tools-good buys, tips and tricks.

Discussion in 'Off-Topic Discussion' started by MI-FL off roader, Dec 27, 2021.

  1. Dec 27, 2021 at 1:26 PM
    #1
    MI-FL off roader

    MI-FL off roader [OP] T4R Hobby/Addict

    Joined:
    Aug 21, 2015
    Member:
    #878
    Messages:
    1,190
    Gender:
    Male
    First Name:
    Brett
    Merritt Island, FL
    Vehicle:
    03' SR5 Sport - 12' Limited
    Too many mods and too much money
    (Mods if there is already a tool section move this accordingly.)
    I looked around for a minute and didn't see a tool thread. So I decided to start one. Post up whatever tools you just bought/rented/used, hand tools, fabrication tools, welders, etc.. and whatever good deals you find. Also post up any homemade tools and general tips you might have. Given our current inflation rate, in the future, people might be more inclined to work on their own vehicles, homes, toys, etc...

    I like my Milwaukee cordless tools but my drill chuck didn't like the abuse I had put it through, and started to have issues. I looked on the Tube, and others have had problems even with warranty chucks so I decided to go this route. There are YT vids detailing how to swap it out.

    https://www.amazon.com/dp/B00DD7KUXO?ref=ppx_yo2_dt_b_product_details

    The old one is to the left and the Rohm is the one installed. New unit is made in Germany and has a very precision feel to it. The only draw back I see is the head not being chromed could possibly mar or scratch vulnerable surfaces, so I will have to be careful. I use it mostly for drilling metal that will be painted anyway so it wasn't that big of a deal.

    Milwaukee replacement chuck.jpg
     
    Thatbassguy likes this.
  2. Dec 27, 2021 at 1:57 PM
    #2
    Dabigono

    Dabigono Just Joined

    Joined:
    Dec 24, 2018
    Member:
    #8196
    Messages:
    3,652
    Vehicle:
    2020 4Runner
  3. Dec 27, 2021 at 2:07 PM
    #3
    Dillusion

    Dillusion New Member

    Joined:
    Dec 10, 2018
    Member:
    #7998
    Messages:
    2,687
    Gender:
    Male
    First Name:
    KYle
    Vehicle:
    2018 TRD OR
    BFH

    If you don't have one or used one I don't know what to say.
     
  4. Dec 27, 2021 at 2:55 PM
    #4
    MI-FL off roader

    MI-FL off roader [OP] T4R Hobby/Addict

    Joined:
    Aug 21, 2015
    Member:
    #878
    Messages:
    1,190
    Gender:
    Male
    First Name:
    Brett
    Merritt Island, FL
    Vehicle:
    03' SR5 Sport - 12' Limited
    Too many mods and too much money
  5. Dec 27, 2021 at 3:03 PM
    #5
    MI-FL off roader

    MI-FL off roader [OP] T4R Hobby/Addict

    Joined:
    Aug 21, 2015
    Member:
    #878
    Messages:
    1,190
    Gender:
    Male
    First Name:
    Brett
    Merritt Island, FL
    Vehicle:
    03' SR5 Sport - 12' Limited
    Too many mods and too much money
    Love my Estwing 28 oz framer. Got a couple smaller ones for light work, two decent size sledges, a dead blow, and a rubber mallet. Cause you never know who or what you might need to hammer.
     
    A&P likes this.
  6. Dec 27, 2021 at 3:05 PM
    #6
    MI-FL off roader

    MI-FL off roader [OP] T4R Hobby/Addict

    Joined:
    Aug 21, 2015
    Member:
    #878
    Messages:
    1,190
    Gender:
    Male
    First Name:
    Brett
    Merritt Island, FL
    Vehicle:
    03' SR5 Sport - 12' Limited
    Too many mods and too much money
    Not familiar w the boot...
     
  7. Dec 27, 2021 at 3:07 PM
    #7
    LandCruiser

    LandCruiser I have Toyotas

    Joined:
    Apr 15, 2021
    Member:
    #20965
    Messages:
    1,526
    Gender:
    Male
    East Bay Area
    Vehicle:
    5th Gen OG TE
    10mm socket.
     
  8. Dec 27, 2021 at 3:31 PM
    #8
    MI-FL off roader

    MI-FL off roader [OP] T4R Hobby/Addict

    Joined:
    Aug 21, 2015
    Member:
    #878
    Messages:
    1,190
    Gender:
    Male
    First Name:
    Brett
    Merritt Island, FL
    Vehicle:
    03' SR5 Sport - 12' Limited
    Too many mods and too much money
    LMAO, Like the proverbial "lost sock", they are always missing.
     
    LandCruiser[QUOTED] likes this.
  9. Jan 11, 2023 at 12:07 PM
    #9
    MI-FL off roader

    MI-FL off roader [OP] T4R Hobby/Addict

    Joined:
    Aug 21, 2015
    Member:
    #878
    Messages:
    1,190
    Gender:
    Male
    First Name:
    Brett
    Merritt Island, FL
    Vehicle:
    03' SR5 Sport - 12' Limited
    Too many mods and too much money
    So far it looks like a decent product.
    20230111_133158.jpg20230111_142735.jpg
     
    Ricphoto, Thatbassguy and Dabigono like this.
  10. Jan 11, 2023 at 1:31 PM
    #10
    Dabigono

    Dabigono Just Joined

    Joined:
    Dec 24, 2018
    Member:
    #8196
    Messages:
    3,652
    Vehicle:
    2020 4Runner
    I’ve been wishing for this jack ^^^
     
  11. Jan 11, 2023 at 2:23 PM
    #11
    Old goat

    Old goat Trout chaser

    Joined:
    Jan 25, 2021
    Member:
    #19357
    Messages:
    160
    Gender:
    Male
    Hudson Valley NY
    Vehicle:
    5th gen
    PLEASE,… if you don’t have a set of jack stands, don’t get under the vehicle!! Never trust just a jack to support your truck
     
    5six, Thatbassguy and ToyoTaco25 like this.
  12. Jan 11, 2023 at 3:06 PM
    #12
    MI-FL off roader

    MI-FL off roader [OP] T4R Hobby/Addict

    Joined:
    Aug 21, 2015
    Member:
    #878
    Messages:
    1,190
    Gender:
    Male
    First Name:
    Brett
    Merritt Island, FL
    Vehicle:
    03' SR5 Sport - 12' Limited
    Too many mods and too much money
    Yes, I have 4 of these double locking 6 tons. That was just a test to see how well the jack does.20230111_180224.jpg
     
    Thatbassguy likes this.
  13. Jan 11, 2023 at 5:13 PM
    #13
    Old goat

    Old goat Trout chaser

    Joined:
    Jan 25, 2021
    Member:
    #19357
    Messages:
    160
    Gender:
    Male
    Hudson Valley NY
    Vehicle:
    5th gen
    Smart man! I know of several instances where avoidable accidents have happened.
     
    Thatbassguy likes this.
  14. Jan 11, 2023 at 8:58 PM
    #14
    McSpazatron

    McSpazatron New Member

    Joined:
    Feb 16, 2021
    Member:
    #19810
    Messages:
    4,612
    Gender:
    Male
    Vehicle:
    2021 4runner OR
    Dobinson IMS Warn Bumper CaliRaised Sliders 285/70 K02s

    I like the adjustable pad on it. What impression do the wheels make on you? Do they look solid and roll well when the jack gets sucked in at max height? Are they steel or plastic?
     
    Old goat and Thatbassguy like this.
  15. Jan 13, 2023 at 5:36 AM
    #15
    MI-FL off roader

    MI-FL off roader [OP] T4R Hobby/Addict

    Joined:
    Aug 21, 2015
    Member:
    #878
    Messages:
    1,190
    Gender:
    Male
    First Name:
    Brett
    Merritt Island, FL
    Vehicle:
    03' SR5 Sport - 12' Limited
    Too many mods and too much money
    I really don't like buying chinese, but I ain't Freakin rich either.
    The Pro Eagle this jack copies is $600. Ridiculous. Does anyone know if that jack is made in America? If they claim that they are, I wonder if the parts are sourced from china and then assembled in the U.S.
    In comparison, my old Daytona (23.5" lift height) gave up the other day and I replaced it during their holiday sale, so for WAY LESS than the Pro Eagle, I bought two 3 ton jacks.

    The wheels are a hard composite, with good bearings and a very good fit on the spindles. They actually roll too well on concrete, because my driveway is sloped, it wanted to take off when I wheeled it out of the garage. I have two of those rubber chocks to keep the truck stationary, so it won't be a problem during lifting. But, in the dirt or on turf it should roll just fine.

    The saddle extension is pretty stout and bolts into the primary saddle with these 10 mm allen heads. I also like the storage slot in the frame, it has a latch and a set screw to keep it secure during transport. Total lift height is 29" with the saddle fully extended, which is a big deal when running 33 to 35" tires.
    Badland saddle 2.jpg Badland saddle.jpg
     
    Thatbassguy likes this.
  16. Jan 13, 2023 at 5:39 AM
    #16
    MI-FL off roader

    MI-FL off roader [OP] T4R Hobby/Addict

    Joined:
    Aug 21, 2015
    Member:
    #878
    Messages:
    1,190
    Gender:
    Male
    First Name:
    Brett
    Merritt Island, FL
    Vehicle:
    03' SR5 Sport - 12' Limited
    Too many mods and too much money
    Thatbassguy likes this.
  17. Jan 13, 2023 at 6:01 AM
    #17
    MI-FL off roader

    MI-FL off roader [OP] T4R Hobby/Addict

    Joined:
    Aug 21, 2015
    Member:
    #878
    Messages:
    1,190
    Gender:
    Male
    First Name:
    Brett
    Merritt Island, FL
    Vehicle:
    03' SR5 Sport - 12' Limited
    Too many mods and too much money
    Just in case there is any doubt lol. There was a Harbor Freight rep on Nate's comment section that said it was designed here by their R&D team, but produced in china.
    20230113_085420.jpg
     
    SlvrSlug and Thatbassguy like this.
  18. Jan 13, 2023 at 6:38 AM
    #18
    Thatbassguy

    Thatbassguy New member? Really??

    Joined:
    Mar 27, 2019
    Member:
    #9314
    Messages:
    12,420
    Gender:
    Male
    First Name:
    James
    S/E Wisconsin
    Vehicle:
    2019 TRDORP, KDSS, MGM
    RSG sliders, Yakima offgrid basket, Pro-Comp wheels, SOS Streamline bumper and skids, Warn VR EVO10S winch + Ultimate Sidewinder, Bilstein 6112 + 5100 + rear lift coils, Rigid Dually SS ditch lights w/Caliraised brackets and OEM style dash switch
    I'd like to replace my floor jack, also. I'll definitely be looking at Harbor Freight. It seems like the majority of my friends are using HF floor jacks now.
     
  19. Jan 13, 2023 at 8:19 PM
    #19
    MI-FL off roader

    MI-FL off roader [OP] T4R Hobby/Addict

    Joined:
    Aug 21, 2015
    Member:
    #878
    Messages:
    1,190
    Gender:
    Male
    First Name:
    Brett
    Merritt Island, FL
    Vehicle:
    03' SR5 Sport - 12' Limited
    Too many mods and too much money
  20. Jan 13, 2023 at 9:49 PM
    #20
    5six

    5six New Member

    Joined:
    Mar 22, 2022
    Member:
    #26248
    Messages:
    555
    Gender:
    Male
    First Name:
    55_4Runner
    GTA, Ontario, Canada
    Vehicle:
    2022 Black TRD ORP
    Ceramic tint (all glass), Toyo AT3s 285/70 C load, Eibach Pro Truck Stage 2 suspension, Ironman UCA, Cartrimhome TRD skid plate, RCI skids (rear diff, transmission, filler plate, catalytic anti theft), SwitchPro 9100 & MT Plate, Caliraised ditch lights & brackets, Caliraised molle panels, Sherpa roof rack, Westcott ladder, Weathertech window visors, Meso & LED interior bulbs, black badging, Weathertech mats, Husky cargo liner, Canvasback rear seat backing, Smittybilt 2781, Morrflate Quad, ARB Diff Breather, Ultimate9, TRD Pro rims, GTR Carbide headlights, DIY Knight Rider light strip.
    Torque wrench, just a few ratchet wrenches (10mm, 11mm, 12mm, 13mm, and 14mm), plastic trim pry tools (cheap Amazon ones work), portable air compressor for tires (more so if you plan offroading), regular ratchet set with extensions. Not necessarily tools, but some lubricants and anti seize grease, and then the opposite … blue loctite. And I’m a newbie, lol.
     
    jth and MI-FL off roader[OP] like this.
  21. May 26, 2023 at 4:09 PM
    #21
    MI-FL off roader

    MI-FL off roader [OP] T4R Hobby/Addict

    Joined:
    Aug 21, 2015
    Member:
    #878
    Messages:
    1,190
    Gender:
    Male
    First Name:
    Brett
    Merritt Island, FL
    Vehicle:
    03' SR5 Sport - 12' Limited
    Too many mods and too much money
  22. May 26, 2023 at 6:02 PM
    #22
    Cowboy59

    Cowboy59 Enjoy the Adventure

    Joined:
    May 17, 2020
    Member:
    #14355
    Messages:
    913
    Gender:
    Male
    N. Florida
    Vehicle:
    2020 Off-Road Premium w/ Predator package & KDSS
    I agree with previous posters that the Badlands Jack rocks. Besides the fact that I don't have to add blocks to my old jack to properly raise my lifted 4R, I love the urethane wheels, as they don't mar my floor. When I go the new jack I touched up all the scars on my poly-coated garage floor, and now no more scarring.

    And I also like that you can lock the handle, which allows you tilt the front wheels off the ground for easy maneuvering of the jack in tight spaces.

    I would add to that list of tools, any battery powered impact wrench, along with a good torque wrench for 70 to 150 lbs, and one that can handle 10 to 70 lbs.
     
    MI-FL off roader[OP] likes this.
  23. May 26, 2023 at 6:04 PM
    #23
    Dillusion

    Dillusion New Member

    Joined:
    Dec 10, 2018
    Member:
    #7998
    Messages:
    2,687
    Gender:
    Male
    First Name:
    KYle
    Vehicle:
    2018 TRD OR
    I just bought a generator capable of taking propane to start from Costco.

    I almost never use it and didn't want to keep fuel sitting. It doesn't produce as much watts on propane or so it says but enough to keep the fridge and freezer going.
     
  24. May 26, 2023 at 7:18 PM
    #24
    FN2187

    FN2187 Stormtrooper

    Joined:
    Jul 6, 2022
    Member:
    #27707
    Messages:
    1,227
    Earth
    Vehicle:
    2019 TRD ORP w/ KDSS
    Victory 4x4 Blitz front bumper Smittybilt 10k Synthetic Gobi Stealth no-rise RCI sliders Rago panels and shelf, dash mount RCI Alu skids Dobinsons 2.5/1.5 285/70 Cooper Discoverer Rugged Trek SSO Hitch Mounted Swingout Anytime Front/Rear Camera
    My father-in-law bought me a Milwaukee screw gun probably 8-10 years ago. Since then, so I can switch batteries out and keep everything on the same set, I've gotten several other things Milwaukee like sander, oscillating multi-tool, jig saw, and weed whacker. I've been happy with all of the products - batteries still work great. Only issue was with the sander when I only had the two smaller batteries - it can eat batteries pretty quickly when you have large sanding projects (refinishing teak table and chairs). Now that I have the 3rd larger battery that came with the weed whacker I can usually rotate them on chargers without issue
     
    MI-FL off roader[OP] likes this.
  25. May 31, 2023 at 2:31 PM
    #25
    Dillusion

    Dillusion New Member

    Joined:
    Dec 10, 2018
    Member:
    #7998
    Messages:
    2,687
    Gender:
    Male
    First Name:
    KYle
    Vehicle:
    2018 TRD OR
    I had all battery operated tools. Makita.

    But now that I only use it at home. I go with all 120V. Got tired of charging batteries and stuff like the angle grinder drains batteries quick.
     

Products Discussed in

To Top