1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Suitable Jack stands

Discussion in '3rd Gen 4Runners (1996-2002)' started by Shadco, Dec 19, 2021.

  1. Dec 19, 2021 at 6:37 PM
    #1
    Shadco

    Shadco [OP] New Member

    Joined:
    Dec 16, 2021
    Member:
    #24672
    Messages:
    19
    Gender:
    Male
    Vehicle:
    2K 4Runner LTD
    For a 3rd gen wwaering 265/75x16s.

    Need to do front pads and no longer own any.

    .
     
  2. Dec 19, 2021 at 7:17 PM
    #2
    Mtbpsych

    Mtbpsych New Member

    Joined:
    Dec 3, 2018
    Member:
    #7922
    Messages:
    1,887
    Gender:
    Male
    Vehicle:
    2018 SR5
    7385 likes this.
  3. Dec 19, 2021 at 8:44 PM
    #3
    Trekker

    Trekker Regular Member

    Joined:
    Jul 25, 2020
    Member:
    #15732
    Messages:
    853
    Gender:
    Male
    Vehicle:
    1997 3rz 5spd
    I have the big red 3 ton stands and the AC Delco 3 tons. Both hold my 4runner fine but I wouldn't recommend either.

    Get 6 ton stands because they extend higher. Both my 3 ton jack stands only extend far enough to hold the suspension uncompressed, but the wheels are still on the ground. This is fully extended. My car has no lift, with the stock 265 tires. Get the 6 ton stands.
     
    7385 likes this.
  4. Dec 20, 2021 at 4:52 AM
    #4
    Shadco

    Shadco [OP] New Member

    Joined:
    Dec 16, 2021
    Member:
    #24672
    Messages:
    19
    Gender:
    Male
    Vehicle:
    2K 4Runner LTD
    Thanks all, that is good info.

    .
     

Products Discussed in

To Top