1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Understanding alignment numbers

Discussion in '5th Gen 4Runners (2010-2024)' started by sr5premium4x4, Oct 8, 2021.

  1. Oct 8, 2021 at 10:19 AM
    #1
    sr5premium4x4

    sr5premium4x4 [OP] New Member

    Joined:
    Oct 8, 2021
    Member:
    #23703
    Messages:
    2
    Got the following alignment numbers for 2021 SR5 Premium.

    Just installed 2.5 inch eibach pro lift kit with no UCA

    Are these alignment numbers any good or requires UCA to fix anything.

    Did not notice any issue myself except stiff ride compared to stock shocks. Just got 400 miles in total so maybe I need to wait little longer to find any issues. But want to understand those alignment numbers.


    Attached picture.

    This forum is extremely helpful to me in choosing and installing Eibach and 285 KO220211007_170212.jpg
     
  2. Oct 8, 2021 at 10:49 AM
    #2
    kmeeg

    kmeeg LionRunner

    Joined:
    Apr 18, 2018
    Member:
    #5853
    Messages:
    4,681
    Gender:
    Male
    No idea about alignment. Here's mine for comparison;
    upload_2021-10-8_11-49-16.jpg

    Update -
    My setup is ELKA 2.5 suspension and SPC UCA.
     
  3. Oct 8, 2021 at 11:12 AM
    #3
    Dillusion

    Dillusion New Member

    Joined:
    Dec 10, 2018
    Member:
    #7998
    Messages:
    2,707
    Gender:
    Male
    First Name:
    KYle
    Vehicle:
    2018 TRD OR
    About as maxed on caster you prolly get on stockers

    If you don't rub and don't plan to upsize you might be ok.
     
  4. Oct 9, 2021 at 5:11 AM
    #4
    sr5premium4x4

    sr5premium4x4 [OP] New Member

    Joined:
    Oct 8, 2021
    Member:
    #23703
    Messages:
    2
    Rubbing slightly on reverse full lock which I am planning to fix. I think mud flaps need to be removed and fender liner needs to be pushed.

    caster being slightly off(.1 degree) specified range cause any other issues?
     

Products Discussed in

To Top