1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Changing the glove box lock

Discussion in '4th Gen 4Runners (2003-2009)' started by solara54, Aug 14, 2016.

  1. Aug 14, 2016 at 1:38 AM
    #1
    solara54

    solara54 [OP] New Member

    Joined:
    Jun 16, 2016
    Member:
    #2156
    Messages:
    10
    Gender:
    Male
    First Name:
    Les
    Vehicle:
    2003 4Rnner
    Hi, I saw that some other owners tried to disassemble the glove box to change the lock but broke the plastic backing cover! Anyone/mechanics knows how to disassemble the cover without breaking it. I did try to pry it but it wouldn't give and probably would break if I tried with more pressure. I have the new lock and want to change it. I see by the illustration that it does come apart but it doesn't say how! Thanks
     
  2. Aug 17, 2016 at 12:17 PM
    #2
    Bob

    Bob Member Staff Member

    Joined:
    Apr 3, 2014
    Member:
    #1
    Messages:
    2,142
    First Name:
    Bob
    SoCal
  3. Aug 18, 2016 at 1:05 AM
    #3
    solara54

    solara54 [OP] New Member

    Joined:
    Jun 16, 2016
    Member:
    #2156
    Messages:
    10
    Gender:
    Male
    First Name:
    Les
    Vehicle:
    2003 4Rnner
    This the outer part of the lock but I can't get to the bolts in the back and no I haven't tried yet. I didn't want to damage my glovebox like the others did! I was hoping a tech was monitoring this thread and give us the answer. If I do find a way, I will post it for everyone.
     
  4. Aug 24, 2016 at 8:03 PM
    #4
    solara54

    solara54 [OP] New Member

    Joined:
    Jun 16, 2016
    Member:
    #2156
    Messages:
    10
    Gender:
    Male
    First Name:
    Les
    Vehicle:
    2003 4Rnner
    Hi, For those who want to remove or replace the glovebox lock, it has nothing to do with the plastic backing on the glovebox. Just remove the two screws holding the lock and while the door is open pry out the lock assembly. To take out the lock assembly, use a small screwdriver and pry the locking tab on the lock side and it will come out. There's a small spring, don't lose it! Now if only I can find my new lock I can install it! I have pictures if needed, I just don't know how to upload to this site yet.
     

Products Discussed in

To Top