1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

3" Lift and VSC issues for 5th Gen?

Discussion in 'Suspension' started by Blue Steel, Jul 7, 2016.

  1. Jul 7, 2016 at 10:09 AM
    #1
    Blue Steel

    Blue Steel [OP] New Member

    Joined:
    Jul 7, 2016
    Member:
    #2266
    Messages:
    2
    Gender:
    Male
    Vehicle:
    2016 TRD Pro 4Runner Quicksand
    I was just curious if going a 3" lift on a 5th Gen caused any problems with the Vehicle Stability Control (VSC)? I have a 2009 Tacoma Prerunner Sport and the VSC would lock-up at times with that grinding sound after I did a 3" Toytec lift. I tried having the dealer zero-out the YAW sensor but it still did it on inclines/declines turning;really scared the crap out of me at times. I ended up removing the 3" Toytec and went with 4" Camburg Spindles which I was able to get the LCAs back to a better angle.

    I say this because I wanted to maybe go a 3" Icon Stage Lift on my 5th Gen and if it causes similar VSC problems like I had on my Tacoma.
     

Products Discussed in

To Top