1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Timing belt change frequency

Discussion in '3rd Gen 4Runners (1996-2002)' started by Ahdofu, Dec 14, 2020.

  1. Dec 14, 2020 at 3:31 PM
    #1
    Ahdofu

    Ahdofu [OP] New Member

    Joined:
    Dec 14, 2020
    Member:
    #18506
    Messages:
    295
    Gender:
    Male
    First Name:
    Matt
    Vehicle:
    1997 4Runner SR5, V6, Auto, 4WD
    Hello,
    I have a 97 4Runner (V6). Per Toyota's recommendation I replaced the timing belt at 60K & 120K. In both instances the old timing belt was in almost new condition. Well the car now has 214K miles on it which means that I'm at 94K on current timing belt. My question at what frequency do people change their timing belts on the 97 4Runners? Driving wise my 4Runner does not get stressed and I live in a moderate climate (Northwest) but I figure there still an upper limit.
    Thanks in advance,
    Matt
     
    Thatbassguy likes this.
  2. Dec 14, 2020 at 8:01 PM
    #2
    Clutchplate

    Clutchplate New Member

    Joined:
    Apr 25, 2020
    Member:
    #13982
    Messages:
    73
    Gender:
    Male
    Vehicle:
    96 4runner 3.4 Liter
    I do mine at 100k
     
    Thatbassguy likes this.
  3. Dec 14, 2020 at 9:19 PM
    #3
    Dillusion

    Dillusion New Member

    Joined:
    Dec 10, 2018
    Member:
    #7998
    Messages:
    2,687
    Gender:
    Male
    First Name:
    KYle
    Vehicle:
    2018 TRD OR
    At 94k its time to start planning on doing it.
     
    Thatbassguy likes this.
  4. Dec 14, 2020 at 10:38 PM
    #4
    mousemeat

    mousemeat New Member

    Joined:
    Oct 8, 2020
    Member:
    #17209
    Messages:
    1,184
    Gender:
    Male
    Memphis, TN.
    Vehicle:
    1997 4 runner limited
    upgraded suspension, large all terrain tires
    at 100k, plan on replacing...better to be safe than sorry
     
    Thatbassguy likes this.
  5. Dec 15, 2020 at 7:38 AM
    #5
    negusm

    negusm New Member

    Joined:
    Oct 22, 2019
    Member:
    #11745
    Messages:
    1,876
    Gender:
    Male
    Vehicle:
    2002 4Runner SR5 4WD
    125k twice and no issues.

    Both belts I took off showed very little if not any wear. I only use the Mitsuboshi (OEM manufacturer) belts.

    It's a non interference engine so no harm if it does snap. On Hondas...I do it at 100k like clock work.
     
    lastcall190 and Thatbassguy like this.
  6. Dec 15, 2020 at 7:49 AM
    #6
    Ahdofu

    Ahdofu [OP] New Member

    Joined:
    Dec 14, 2020
    Member:
    #18506
    Messages:
    295
    Gender:
    Male
    First Name:
    Matt
    Vehicle:
    1997 4Runner SR5, V6, Auto, 4WD
    Thanks for all the replies. I suppose I can wait till at least 100K.
    Negusm, At 250K did you replace the seals for the cam and the main or were they they still good?
     
    Thatbassguy likes this.
  7. Dec 15, 2020 at 8:19 AM
    #7
    negusm

    negusm New Member

    Joined:
    Oct 22, 2019
    Member:
    #11745
    Messages:
    1,876
    Gender:
    Male
    Vehicle:
    2002 4Runner SR5 4WD
    At 125k, I skipped those seals.

    At 250k I replaced them and they looked fine, none were leaking but after I took them out, they were not quite as pliable as the replacements. (get a seal puller...totally worth it and to install there are super cheap PVC pipe adapters for plumbing from Home Depot for the size of the seal to tap it in with).

    At 250k, I checked the half moons for the cam shaft and they were fine...and not leaking, so I left them. I did do the valve cover gaskets. If you haven't done them by 200k...they have to be leaking. So best time to check those half moons.

    Funny thing is I had gotten seals in the t-belt kit I bought at 125k miles. The t-belt kit I got for 250k came with seals too. I compared them and the newer seals were NOT quite the same. The difference was the first kit supplied OEM Asian seals and the second were no-name. I used the Asian seals. The second kit did have all OEM Asian parts except for those seals. So you have to be careful. Sellers will still throw junk in with good parts!

    250k was a huge maintenance job. I also did all new vacuum hoses, coolant hoses, radiator, throttle body, intake air hoses, t-belt, seals, pulleys, tensioner, water pump, etc. Gunning to get a good 10 more years out of her.
     
    Last edited: Dec 15, 2020
    16runnerblue and Thatbassguy like this.
  8. Dec 15, 2020 at 10:55 AM
    #8
    mousemeat

    mousemeat New Member

    Joined:
    Oct 8, 2020
    Member:
    #17209
    Messages:
    1,184
    Gender:
    Male
    Memphis, TN.
    Vehicle:
    1997 4 runner limited
    upgraded suspension, large all terrain tires
    well, if you do the maintenance on a regular basis, and don't skimp...your vehicle should serve you well...my corvair is over 50 yrs old, my fiero is 33, and my 4Runner is 23....and shows no evidence of giving up the ghost...
     
    Thatbassguy likes this.
  9. Dec 15, 2020 at 12:13 PM
    #9
    Thatbassguy

    Thatbassguy New member? Really??

    Joined:
    Mar 27, 2019
    Member:
    #9314
    Messages:
    12,408
    Gender:
    Male
    First Name:
    James
    S/E Wisconsin
    Vehicle:
    2019 TRDORP, KDSS, MGM
    RSG sliders, Yakima offgrid basket, Pro-Comp wheels, SOS Streamline bumper and skids, Warn VR EVO10S winch + Ultimate Sidewinder, Bilstein 6112 + 5100 + rear lift coils, Rigid Dually SS ditch lights w/Caliraised brackets and OEM style dash switch
    I let the belt in my '03 V8 go for around 240K miles. This was definitely too long!!:eek:

    100K seems pretty safe.

    IMG_20150501_234344409.jpg
    IMG_20150501_234401705.jpg
     
    16runnerblue likes this.
  10. Dec 15, 2020 at 2:47 PM
    #10
    Ahdofu

    Ahdofu [OP] New Member

    Joined:
    Dec 14, 2020
    Member:
    #18506
    Messages:
    295
    Gender:
    Male
    First Name:
    Matt
    Vehicle:
    1997 4Runner SR5, V6, Auto, 4WD
    James - thanks so much for the pictures. And you kept them on for 240K!. Now I have a visual reference on how bad they can get. I was under the impression that they just fail w/o any visual clues. This picture tells me one sees deterioration marks before failure occurs. As I write this I suppose I can inspect them on a regular basis if I wanted to delay replacement beyond 100K.

    Negusm, I have already replaced the valve cover gaskets twice. They sure don't last that long. I see that you also replaced all the vacuum tubes. Did you buy the tubings bulk and cut them to size or are these things sold in kits?
     
    Thatbassguy likes this.
  11. Dec 15, 2020 at 2:54 PM
    #11
    Thatbassguy

    Thatbassguy New member? Really??

    Joined:
    Mar 27, 2019
    Member:
    #9314
    Messages:
    12,408
    Gender:
    Male
    First Name:
    James
    S/E Wisconsin
    Vehicle:
    2019 TRDORP, KDSS, MGM
    RSG sliders, Yakima offgrid basket, Pro-Comp wheels, SOS Streamline bumper and skids, Warn VR EVO10S winch + Ultimate Sidewinder, Bilstein 6112 + 5100 + rear lift coils, Rigid Dually SS ditch lights w/Caliraised brackets and OEM style dash switch
    I wouldn't push it until it looks like that ever again! It's a miracle that thing didn't snap, which would have been extremely expensive! I do not endorse waiting more than 100K!!
     
  12. Dec 15, 2020 at 3:27 PM
    #12
    07 2wd v8

    07 2wd v8 New Member

    Joined:
    Dec 15, 2020
    Member:
    #18525
    Messages:
    10
    Gender:
    Male
    First Name:
    Ray
    Vehicle:
    2007 4Runner V8
    None
    2007 2WD-Just replaced mine at 99,950 miles. The tech showed me the original belt and I was amazed at the looks like new condition. He assured me that it was the original belt from Toyota. This vehicle was definitely babied its one owner life. The CarFax was three pages long with oil changes and different fluid flushes.
     
  13. Dec 16, 2020 at 7:58 AM
    #13
    negusm

    negusm New Member

    Joined:
    Oct 22, 2019
    Member:
    #11745
    Messages:
    1,876
    Gender:
    Male
    Vehicle:
    2002 4Runner SR5 4WD
    I went on Partsouq.com, got all the part numbers for the molded hoses using my vin and bought them discounted from McGeorge Toyota. So they are all correct Toyota hoses. They are not that expensive.

    The ones that are just straight hose, I went to NAPA and had them get me 6mm/8mm/10mm or whatever is correct vacuum hose. They only keep SAE hose in stock...but were happy to order metric stuff. The SAE sizes or Fuel hose won't fit the brackets for the vacuum hose. I try to do it right the first time.

    I look at it like this...the Toyota engineers did a heckuva job on this engine. They picked specific sizes/diameters/lengths/bends. Why would I use anything except what they designed?
     
    Clutchplate likes this.
  14. Dec 17, 2020 at 6:18 PM
    #14
    Ahdofu

    Ahdofu [OP] New Member

    Joined:
    Dec 14, 2020
    Member:
    #18506
    Messages:
    295
    Gender:
    Male
    First Name:
    Matt
    Vehicle:
    1997 4Runner SR5, V6, Auto, 4WD
    Thanks Negusm
     
  15. Dec 17, 2020 at 6:46 PM
    #15
    Thatbassguy

    Thatbassguy New member? Really??

    Joined:
    Mar 27, 2019
    Member:
    #9314
    Messages:
    12,408
    Gender:
    Male
    First Name:
    James
    S/E Wisconsin
    Vehicle:
    2019 TRDORP, KDSS, MGM
    RSG sliders, Yakima offgrid basket, Pro-Comp wheels, SOS Streamline bumper and skids, Warn VR EVO10S winch + Ultimate Sidewinder, Bilstein 6112 + 5100 + rear lift coils, Rigid Dually SS ditch lights w/Caliraised brackets and OEM style dash switch
    @Ahdofu I feel like I should add this.

    I have done timing belts on 3 Toyota motors.

    -5MG, (twice), 3VZ, and 2UZ.

    They have made it near impossible to screw up. Rotate the engine to where the marks are lined up with the inside timing belt cover before removing the belt. The new belt has marks that line up with marks one the cam gears and crank gear. Every one has been so easy. It's just a lot of removal and re-installation.

    Anyone with a good set of tools, time, and able to follow directions can do it.
     
  16. Dec 17, 2020 at 7:17 PM
    #16
    Ahdofu

    Ahdofu [OP] New Member

    Joined:
    Dec 14, 2020
    Member:
    #18506
    Messages:
    295
    Gender:
    Male
    First Name:
    Matt
    Vehicle:
    1997 4Runner SR5, V6, Auto, 4WD
    I have done this twice on my V6 4Runner. As you've noted there are a lot to remove and reinstall. They have made it easy with the marks but I found the installation method of the belt to be unsatisfactory. The directions say install the belt after all the components have been installed. I found it quite hard to to slide the belt over with everything in place. The right way to do it, is to not install the hydraulic tensioner. This allows the tensioner pully to drop a bit and this makes it a lot easier to install the belt. Once the belt is in place, then add the hydraulic tensioner and of course don't forget to pull the pin afterwards. Anyway it is still a chore as this time around I'll be replacing the main as well as the cam seals.
     
    Thatbassguy[QUOTED] likes this.
  17. Dec 17, 2020 at 7:23 PM
    #17
    Thatbassguy

    Thatbassguy New member? Really??

    Joined:
    Mar 27, 2019
    Member:
    #9314
    Messages:
    12,408
    Gender:
    Male
    First Name:
    James
    S/E Wisconsin
    Vehicle:
    2019 TRDORP, KDSS, MGM
    RSG sliders, Yakima offgrid basket, Pro-Comp wheels, SOS Streamline bumper and skids, Warn VR EVO10S winch + Ultimate Sidewinder, Bilstein 6112 + 5100 + rear lift coils, Rigid Dually SS ditch lights w/Caliraised brackets and OEM style dash switch
    Good call installing the tensioner last!

    And, those seals are definitely an added chore!
     
  18. Apr 17, 2021 at 8:51 PM
    #18
    Ahdofu

    Ahdofu [OP] New Member

    Joined:
    Dec 14, 2020
    Member:
    #18506
    Messages:
    295
    Gender:
    Male
    First Name:
    Matt
    Vehicle:
    1997 4Runner SR5, V6, Auto, 4WD
    Ended up replacing the timing belt this week. The old belt had 100K miles on it. To me it still looks pristine.


    IMG_2832.jpg
     
    Last edited: Apr 17, 2021
  19. Apr 19, 2021 at 7:22 AM
    #19
    negusm

    negusm New Member

    Joined:
    Oct 22, 2019
    Member:
    #11745
    Messages:
    1,876
    Gender:
    Male
    Vehicle:
    2002 4Runner SR5 4WD
    Yup. I changed mine at 125k and 250k miles and it looked fine.

    I think I saw someone who got a car with 250k miles or more that never had a belt changed. The belt was noticeably cracked all over. So definitely they need to be changed...but 100k is obviously not critical.

    Nice thing is our engines are non-interference, so if a belt brakes, you just get embarrassed on the side of the road and no damage to the engine.
     

Products Discussed in

To Top