1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

2020 + arb compressor mounting options

Discussion in '5th Gen 4Runners (2010-2024)' started by newlife, Jan 8, 2021.

  1. Jan 8, 2021 at 12:49 PM
    #1
    newlife

    newlife [OP] Not all who wander are ...... squirrel

    Joined:
    Sep 6, 2020
    Member:
    #16546
    Messages:
    860
    Gender:
    Male
    First Name:
    Adam
    Knoxville TN
    Vehicle:
    2021 venture 22 JTR
    All of them.
    So here’s my dilemma. I am ordering the arb Dual and can’t find anything but the slee mount for a dual air compressor mount on drive side. The issue is Toyota in their infinite wisdom added a larger than normal relay box and a bunch of wiring connectors on the driver side. Where most everyone mounts their compressors. I can’t do passenger fire wall because my dual battery setup is there. So what are my options for those that have done it. I don’t want the wifey kit from rago because they don’t offer install instructions for the 2020+ And basically the message on FB I got from them was you need to move some things. And that was it.

    So anyone got any other options they know of ?
     
    Last edited: Jan 9, 2021
  2. Jan 8, 2021 at 3:55 PM
    #2
    Mtbpsych

    Mtbpsych New Member

    Joined:
    Dec 3, 2018
    Member:
    #7922
    Messages:
    1,887
    Gender:
    Male
    Vehicle:
    2018 SR5
    I’ve seen people mount it in the rear where either the bottle jack goes or the little cubby area on the passenger side.
     
  3. Jan 8, 2021 at 5:10 PM
    #3
    Red_5

    Red_5 New Member

    Joined:
    Jul 8, 2020
    Member:
    #15378
    Messages:
    386
    Been overlanding for over a decade, with lots of different people and rigs. I still don't "get" on-board air. I just keep my Viair in a bag, and hook it up to the battery when I need to air up.

    All that said (since it was unhelpful), I'd definitely mount one in the vehicle cabin, if I could. Underhood stuff takes a lot of abuse due to dust, moisture, and heat cycling.
     
  4. Jan 8, 2021 at 5:41 PM
    #4
    mtnbiker67

    mtnbiker67 New Member

    Joined:
    Aug 19, 2020
    Member:
    #16208
    Messages:
    86
    Gender:
    Male
    First Name:
    Scott
    Vehicle:
    2020 TRD
    Google ARB compressor mounts for gen 5 4Runner. I've came across a few companies that make a mount for passenger side firewall. Lots of room there. Just can't remember the names of them. I'm old.
     
  5. Jan 8, 2021 at 9:01 PM
    #5
    glwood54

    glwood54 Stop making me buy stuff!

    Joined:
    Aug 19, 2019
    Member:
    #10964
    Messages:
    5,536
    Gender:
    Male
    First Name:
    Gary
    Albuquerque, NM
    Vehicle:
    2019 OR, KDSS, RSG sliders, Eibach shocks, 265/70 Falken Wildpeaks
    I get the feeling the post by @newlife was supposed to say can't do...
     
    newlife[QUOTED][OP] likes this.
  6. Jan 8, 2021 at 9:36 PM
    #6
    aesthetics

    aesthetics New Member

    Joined:
    Jul 24, 2019
    Member:
    #10676
    Messages:
    47
    I just put the Slee bracket in with the 2020 fuse box relocate. The slee mount is well built and the relocation bracket should allow you to put in any 5th gen driver side mount as it moves the fuse box closer to the firewall and frees up the mounting holes most other brackets use.

    I may be moving the compressor to the passenger side via Shrockworks dual battery smog pump relocate bracket + bandi arb compressor mount. and using the slee mount an spod to the driver side.
     
  7. Jan 9, 2021 at 6:17 AM
    #7
    newlife

    newlife [OP] Not all who wander are ...... squirrel

    Joined:
    Sep 6, 2020
    Member:
    #16546
    Messages:
    860
    Gender:
    Male
    First Name:
    Adam
    Knoxville TN
    Vehicle:
    2021 venture 22 JTR
    All of them.
    Thanks. I fixed it. But yes I can’t do passenger because my battery is there with the red arc. Well it will be today lol. Going to a buddy’s to borrower his router to cut the battery cover out today. Using a 1/2” piece of hdpe
     
  8. Jan 12, 2021 at 7:44 PM
    #8
    rageandlove

    rageandlove New Member

    Joined:
    Jul 10, 2020
    Member:
    #15427
    Messages:
    166
    Rago makes a very nice aluminum mount for driver's side that works with a minor tweak. Instructions here.

    (I've got one for sale for $40 if anyone is interested - I moved my compressor to the other side to make room for a Switch Pros.)
     
  9. Jan 13, 2021 at 3:57 AM
    #9
    newlife

    newlife [OP] Not all who wander are ...... squirrel

    Joined:
    Sep 6, 2020
    Member:
    #16546
    Messages:
    860
    Gender:
    Male
    First Name:
    Adam
    Knoxville TN
    Vehicle:
    2021 venture 22 JTR
    All of them.
    You’re selling the whole rago tray for 40?
     
  10. Jan 13, 2021 at 7:51 AM
    #10
    MAXIM

    MAXIM New Member

    Joined:
    Jan 6, 2020
    Member:
    #12593
    Messages:
    394
    Gender:
    Male
    Passenger Side via DIY custom bracket:

    -and-lt;-and-lt;-and-lt;-and-lt;-albums-_5ea9c85b95852311522875bf4616ef71b12ca756.jpg
     
  11. Jan 13, 2021 at 8:01 AM
    #11
    rageandlove

    rageandlove New Member

    Joined:
    Jul 10, 2020
    Member:
    #15427
    Messages:
    166
    Yeah + shipping. I'm not using it anymore so may as well go to someone that will use it. It's really well done - light and no rust and great fit.

    There are 5 bolts. I only have 2 (re-used the other 3) so you would need to make a trip to the h/w store for that or get them from Rago - they are really good about sending you their h/w for a few bucks.

    I was trying to sell it locally to avoid a trip to UPS, but if there's someone that wants it, I can go on a weekend.
     
  12. Jan 13, 2021 at 10:39 AM
    #12
    aesthetics

    aesthetics New Member

    Joined:
    Jul 24, 2019
    Member:
    #10676
    Messages:
    47
    What fitting is that? Looks beautiful compared to my 90 brass lol
     
  13. Jan 13, 2021 at 1:55 PM
    #13
    MAXIM

    MAXIM New Member

    Joined:
    Jan 6, 2020
    Member:
    #12593
    Messages:
    394
    Gender:
    Male
    Anodized aluminum 1/4 in NPT 45 degree fitting (any brand will do fine).
     
  14. Jan 13, 2021 at 1:59 PM
    #14
    ocrnr

    ocrnr New Member

    Joined:
    Oct 28, 2020
    Member:
    #17588
    Messages:
    15
    Gender:
    Male
    Vehicle:
    2020 TRD PRO
    i got a slee mount and the relocation bracket for the relay box. ill get a picture later on and post it for yall
     
  15. Jan 13, 2021 at 5:29 PM
    #15
    newlife

    newlife [OP] Not all who wander are ...... squirrel

    Joined:
    Sep 6, 2020
    Member:
    #16546
    Messages:
    860
    Gender:
    Male
    First Name:
    Adam
    Knoxville TN
    Vehicle:
    2021 venture 22 JTR
    All of them.
    Sent you a message
     

Products Discussed in

To Top