1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Removing Roof Rack

Discussion in '5th Gen 4Runners (2010-2024)' started by trdrunner2020, Nov 18, 2020.

  1. Nov 18, 2020 at 7:51 AM
    #1
    trdrunner2020

    trdrunner2020 [OP] @trdrunner2020

    Joined:
    Sep 16, 2020
    Member:
    #16783
    Messages:
    29
    Gender:
    Male
    Vehicle:
    2020 Black 4Runner TRD Pro
    I need some help yall. Has anyone removed a trd pro roof rack? I'm trying to install a front runner roof rack but first need to remove my existing pro roof rack. I've seen videos on removing the factory side rails but these are not sockets they are torx bolts. And unfortunately have a lot of thread locker on them, the red stuff. Any one got some advice or tips? Or if you have removed side rails any help there? Thank you!
     
  2. Nov 18, 2020 at 8:48 AM
    #2
    Daytonaviolet

    Daytonaviolet TRD Bro

    Joined:
    Mar 13, 2019
    Member:
    #9167
    Messages:
    1,639
    Gender:
    Male
    Bay Area, CA
    Vehicle:
    Blizzard Pearl TRD Bro
    My advice :)

    Keep in mind there’s a floating bracket which can fall off if the bolts are taken off individually.

    To undo the bolts, loosen one bolt two turns and switch to the other one. The goal is to have both bolts still attached to the bracket until the very end. Continue and at some point you’ll hit resistance, this is the loctite zone. This is the crucial area, the loctite zone is where it becomes harder to turn the bolt and may cause the bracket to slip. But since both bolts are still in place, the bracket will not slip out. Continue to alternatively turn each bolt until your out of the loctite zone and your good
     
  3. Nov 18, 2020 at 9:44 AM
    #3
    RusPro17

    RusPro17 Back home again!!

    Joined:
    Sep 26, 2017
    Member:
    #4821
    Messages:
    1,557
    Gender:
    Male
    First Name:
    Don
    Pa.
    Vehicle:
    2023 TRD Pro Solar Octane
    SCS wheels and Westcott lift
    Do just what Daytonaviolet said. You cannot rush this. I removed mine no problem. There are guys that had to drop there roof liner inside because of the small brackets.
     
    Thatbassguy likes this.
  4. Nov 18, 2020 at 10:05 AM
    #4
    trdrunner2020

    trdrunner2020 [OP] @trdrunner2020

    Joined:
    Sep 16, 2020
    Member:
    #16783
    Messages:
    29
    Gender:
    Male
    Vehicle:
    2020 Black 4Runner TRD Pro
    Thanks for the advice! The bolts are very difficult to even get started to turn. But hopefully if I take it slow I won't have to remove the headliner
     
    Thatbassguy likes this.
  5. Jan 7, 2021 at 7:57 PM
    #5
    PJPreacher

    PJPreacher New Member

    Joined:
    Jan 6, 2021
    Member:
    #18953
    Messages:
    11
    Gender:
    Male
    Vehicle:
    2020 4Runner TRD Pro
    2 inch lift , HID headlight kit and prinsu roof rack
    My experience with removing the basket from the roof :angrygirl: I found out how hard it is to remove. I went slow and still stripped out the bolt :bananadead: I used extractors and a dremel. I even dropped a retainer into the headliner.:crapstorm: 3 days working the solution to extract bolts. I tried using heat and vice grips to turn the remaining bolt shafts, no luck. I may resort to removing the headliner and buying new retainers. Did you have any issues?
     
  6. Jan 8, 2021 at 5:41 AM
    #6
    trdrunner2020

    trdrunner2020 [OP] @trdrunner2020

    Joined:
    Sep 16, 2020
    Member:
    #16783
    Messages:
    29
    Gender:
    Male
    Vehicle:
    2020 Black 4Runner TRD Pro
    I had trouble from the beginning. Same issues. Stripped those shitty torx bolts and eventually drilled the heads off the bolts. Had to drop the headliner slightly so I could get the brackets with the bolt stuck in them and replace them with new brackets. Very frustrating and time consuming process but with the right tools not that terrible. If you have to drop the headliner I would recommend getting a trim removal kit off made it way easier
     
  7. Jan 8, 2021 at 7:42 AM
    #7
    RusPro17

    RusPro17 Back home again!!

    Joined:
    Sep 26, 2017
    Member:
    #4821
    Messages:
    1,557
    Gender:
    Male
    First Name:
    Don
    Pa.
    Vehicle:
    2023 TRD Pro Solar Octane
    SCS wheels and Westcott lift
    There is so much write up on removing the roof rack. I recommend to google search all the info before you remove the roof rack. The key is patients to doing this. You cannot rush this job. I removed my Pro rack and added the black rails and removed them and did the roof rack delete. I had no issues at all. Just giving my opinion without upsetting someone. I did a lot of research before I removed mine.
     
  8. Jan 8, 2021 at 8:07 AM
    #8
    MA250

    MA250 New Member

    Joined:
    Dec 26, 2020
    Member:
    #18738
    Messages:
    12
    Gender:
    Male
    First Name:
    Brian
    Vehicle:
    2021 4Runner TRD Pro Magnetic Gray Metallic
    Would removing the roof basket on a 2020/2021 TRD Pro be similar to the video below on removing the rails of a 5th gen 4runr? Same bolt removal procedure?

    5th Gen 4 Runner Rack Rail Removal Procedure https://www.youtube.com/watch?v=8qu7Plf8Leo

    Here are two bolts from the video on a non-trd pro 4runr.
    upload_2021-1-8_11-5-24.jpg


    I’m assuming the bolts in the picture above go into the same holes in the TRD PRO basket identified by the red arrow below.
    upload_2021-1-8_11-6-1.jpg

    These are the bolt retainers/glides that has been noted that can drop into headliner.
    upload_2021-1-8_11-6-20.jpg

    These are the rail plugs Toyota sells for the 5th gen 4runr. In description it below it lists to model year 2020. I am assuming they are the same for the TRD Pro. I purchased them to remove my basket at some point in the future. I’m hoping it’s a straightforward process as I would like to have the option to have the roof basket on and off as needed.

    upload_2021-1-8_11-6-45.jpg
    upload_2021-1-8_11-6-57.jpg
     

    Attached Files:

    Last edited: Jan 8, 2021
    DesertRob likes this.
  9. Jan 8, 2021 at 8:16 AM
    #9
    Snowtrooper

    Snowtrooper 5th gen TuRD

    Joined:
    Dec 20, 2020
    Member:
    #18631
    Messages:
    7
    My condolences. Keep us updated on the headliner as I’m sure others might encounter the same problem but could use your plight/ experience on a quick search.

    I wonder why Toyota of NA decided with the torx bolts. Aerodynamics on a brick? Ain’t nobody trying to steal that monstrosity.
     
    djwantke likes this.
  10. Jan 8, 2021 at 8:59 AM
    #10
    08TXRunner

    08TXRunner New Member

    Joined:
    Feb 17, 2020
    Member:
    #13179
    Messages:
    929
    Gender:
    Male
    Vehicle:
    '20 SR5P
    Sounds like it would be a good idea to have replacement bolts and brackets handy in case things go sideways. Return them if not needed.
     
  11. Jan 8, 2021 at 10:19 AM
    #11
    RusPro17

    RusPro17 Back home again!!

    Joined:
    Sep 26, 2017
    Member:
    #4821
    Messages:
    1,557
    Gender:
    Male
    First Name:
    Don
    Pa.
    Vehicle:
    2023 TRD Pro Solar Octane
    SCS wheels and Westcott lift
     
  12. Jan 8, 2021 at 10:21 AM
    #12
    RusPro17

    RusPro17 Back home again!!

    Joined:
    Sep 26, 2017
    Member:
    #4821
    Messages:
    1,557
    Gender:
    Male
    First Name:
    Don
    Pa.
    Vehicle:
    2023 TRD Pro Solar Octane
    SCS wheels and Westcott lift
    It’s the same procedure as the Pro roof rack but the difference is Toyota puts red lock tite on the torx head bolts at the port. That’s why you go back and forth with each one with just a little turn.
     
    djwantke likes this.
  13. Jan 8, 2021 at 10:33 AM
    #13
    RusPro17

    RusPro17 Back home again!!

    Joined:
    Sep 26, 2017
    Member:
    #4821
    Messages:
    1,557
    Gender:
    Male
    First Name:
    Don
    Pa.
    Vehicle:
    2023 TRD Pro Solar Octane
    SCS wheels and Westcott lift
    3906A3F1-2952-40EB-8923-CE2A9F9216D1.jpg Here is some pics after I removed mine.
     
    MA250 likes this.
  14. Jan 8, 2021 at 10:34 AM
    #14
    RusPro17

    RusPro17 Back home again!!

    Joined:
    Sep 26, 2017
    Member:
    #4821
    Messages:
    1,557
    Gender:
    Male
    First Name:
    Don
    Pa.
    Vehicle:
    2023 TRD Pro Solar Octane
    SCS wheels and Westcott lift
    6D90774E-E9E7-4032-A21D-965A525A9060.jpg Another.
     
  15. Jan 8, 2021 at 10:36 AM
    #15
    RusPro17

    RusPro17 Back home again!!

    Joined:
    Sep 26, 2017
    Member:
    #4821
    Messages:
    1,557
    Gender:
    Male
    First Name:
    Don
    Pa.
    Vehicle:
    2023 TRD Pro Solar Octane
    SCS wheels and Westcott lift
    DE18EA5A-6F2B-4DC4-A2C3-DF939005082F.jpg The best part without. I don’t use the roof rack. Don’t need a roof rack. So much easier to detail and clean the top. Just my opinion.
     
  16. Jan 8, 2021 at 11:22 AM
    #16
    4RoccoRunner

    4RoccoRunner New Member

    Joined:
    Jan 4, 2021
    Member:
    #18908
    Messages:
    21
    Gender:
    Male
    First Name:
    Max
    Vehicle:
    2020 Army Green 4Runner TRDPro
    Prinsu Full Length Rack (Non-Drill) CaliRaisedLED slim light bar
    dammit. I was happy with my full flat rack. But that just looks so darn clean now.

    well done sir.
     
  17. Jan 8, 2021 at 11:29 AM
    #17
    RusPro17

    RusPro17 Back home again!!

    Joined:
    Sep 26, 2017
    Member:
    #4821
    Messages:
    1,557
    Gender:
    Male
    First Name:
    Don
    Pa.
    Vehicle:
    2023 TRD Pro Solar Octane
    SCS wheels and Westcott lift
    Thanks Max, Yeah I like it better. After I removed it the wife had to mess with me and she said she liked it better with the roof rack. But I new she was only kidding. If I had use for the rack would have kept it. But being so anal about cleaning my vehicles it is so much easier now.
     
  18. Jan 8, 2021 at 11:34 AM
    #18
    08TXRunner

    08TXRunner New Member

    Joined:
    Feb 17, 2020
    Member:
    #13179
    Messages:
    929
    Gender:
    Male
    Vehicle:
    '20 SR5P
    Looks great man. What did you use to finish up the bolt holes?
     
  19. Jan 8, 2021 at 11:41 AM
    #19
    RusPro17

    RusPro17 Back home again!!

    Joined:
    Sep 26, 2017
    Member:
    #4821
    Messages:
    1,557
    Gender:
    Male
    First Name:
    Don
    Pa.
    Vehicle:
    2023 TRD Pro Solar Octane
    SCS wheels and Westcott lift
    Silicone and did not over tighten bolts. I did not crank them down. I just used my own judgment for how tight. Thanks for the compliment!!
     
  20. Jan 8, 2021 at 12:27 PM
    #20
    newlife

    newlife Not all who wander are ...... squirrel

    Joined:
    Sep 6, 2020
    Member:
    #16546
    Messages:
    860
    Gender:
    Male
    First Name:
    Adam
    Knoxville TN
    Vehicle:
    2021 venture 22 JTR
    All of them.
    There’s some rack delete brackets floating around somewhere that you can cover the bolts with and it looks like one continuous piece of trim. Let me see if I can find them

    never mind @MA250 posted them a little ways up.
     
  21. Jan 8, 2021 at 4:46 PM
    #21
    YetiMtnBkr

    YetiMtnBkr New Member

    Joined:
    Jan 3, 2021
    Member:
    #18893
    Messages:
    940
    Gender:
    Male
    First Name:
    Jim
    Frederick, MD
    Vehicle:
    2021 LR Pro
    None
    Looks so much better without that obnoxious do nothing rack. I think Toyota only puts that ridiculous monstrosity of a rack on to distinguish it as a Pro! That would be the first mod (de-mod) I would make on the Pro!
     
  22. Jan 8, 2021 at 5:29 PM
    #22
    MA250

    MA250 New Member

    Joined:
    Dec 26, 2020
    Member:
    #18738
    Messages:
    12
    Gender:
    Male
    First Name:
    Brian
    Vehicle:
    2021 4Runner TRD Pro Magnetic Gray Metallic
    Aerodynamics is not a hi priory engineering design criteria for a vehicle w
    I agree the 4runr looks better to me with it off. There are people in mid west (big sky country) that probably use racks more as the have access to numerous, and extremely large off-roading areas.
     
  23. Aug 29, 2023 at 6:35 PM
    #23
    RusPro17

    RusPro17 Back home again!!

    Joined:
    Sep 26, 2017
    Member:
    #4821
    Messages:
    1,557
    Gender:
    Male
    First Name:
    Don
    Pa.
    Vehicle:
    2023 TRD Pro Solar Octane
    SCS wheels and Westcott lift
    Had to bring this post back to life!! I see myself doing it again when I get my Pro. Lol.
     
    djwantke likes this.
  24. Aug 29, 2023 at 7:47 PM
    #24
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    2,605
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -K&N Engine Air Filter *NOW FRAM EXTRA GUARD CA10835 -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    @RusPro17 hahah patience right!? hope you still have the same control of your emotions
     
    RusPro17 likes this.

Products Discussed in

To Top