1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Wheel clearance

Discussion in '5th Gen 4Runners (2010-2024)' started by SCyota, Oct 21, 2020.

  1. Oct 21, 2020 at 5:37 PM
    #1
    SCyota

    SCyota [OP] New Member

    Joined:
    Oct 17, 2020
    Member:
    #17377
    Messages:
    4
    Gender:
    Male
    Question for you guys...will 285/70/17s clear the UCAs and the cab mounts with just a stock suspension if I get wheels with a 0 or slightly negative offset?
     
  2. Oct 21, 2020 at 5:42 PM
    #2
    fajitas21

    fajitas21 New Member

    Joined:
    Aug 2, 2016
    Member:
    #2395
    Messages:
    1,344
    Gender:
    Male
    First Name:
    Lee
    Collierville, TN
    Vehicle:
    2020 ORP
    Custom scratches
    Depends on tires. Some run smaller, like BFG, and would probably work without an issue at 0mm offset or a 7.5 or 8.5" wheel. 9" wheels...also probably...

    -12mm offset yes, but you'll have more rubbing on that offset to trim for.

    As far as will you clear UCAs on stock suspension, probably. Will you clear Cab mounts, probably not even close. I got my 265/70/r17 to rub with a 2.5" lift on -12mm offset wheels (8.5"), I imagine you'll rub pretty hard. At a minimum, mudflaps and front valance trimming will happpen.
     
  3. Oct 21, 2020 at 6:56 PM
    #3
    Mtbpsych

    Mtbpsych New Member

    Joined:
    Dec 3, 2018
    Member:
    #7922
    Messages:
    1,887
    Gender:
    Male
    Vehicle:
    2018 SR5
    You should clear UCA’s but will more than likely rub on the cab mount/pinch weld area.
    You’ll need to do quite a bit of work to get them to fit properly at stock height.
     
  4. Oct 21, 2020 at 8:34 PM
    #4
    SCyota

    SCyota [OP] New Member

    Joined:
    Oct 17, 2020
    Member:
    #17377
    Messages:
    4
    Gender:
    Male
    Thanks for the info guys.
     

Products Discussed in

To Top