1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Transmission not engaging

Discussion in '3rd Gen 4Runners (1996-2002)' started by trspaulding, Sep 30, 2020.

  1. Sep 30, 2020 at 8:11 AM
    #1
    trspaulding

    trspaulding [OP] New Member

    Joined:
    Sep 30, 2020
    Member:
    #17056
    Messages:
    4
    Vehicle:
    2001 4Runner SR5
    Hey folks--

    I drive a 2001 automatic. 233K miles or so. Engine runs fine but been having some hard shifts lately. Did a fluid change and that helped a fair bit. Hard shifts are only really when it's cold--either temp or engine.

    Friday it threw a code for a bad solenoid, which I was happy about--seems a fairly easy fix. That night I was driving about 50MPH and it felt like the tranny shifted to neutral. Pulled over, won't engage in any gear--4WD Hi, Lo, or any of the regular gears (R,D,1,2, etc.).

    I have noticed when I start it up, it sounds normal. When I go to engage it in any gear there's a whine like something is spinning but not engaging. It's as if the engine is not engaging the transmission.

    Any thoughts? I'm fine to replace the tranny if need be but I don't want to get hosed for a whole transmission if there's something simpler.

    Any feedback or thoughts are greatly appreciated!

    -Tim
     
  2. Oct 1, 2020 at 12:27 PM
    #2
    speedmaster

    speedmaster New Member

    Joined:
    Oct 1, 2020
    Member:
    #17077
    Messages:
    24
    Gender:
    Male
    Most definitely NOT an expert here. But maybe torque converter?
     
  3. Oct 2, 2020 at 11:39 AM
    #3
    negusm

    negusm New Member

    Joined:
    Oct 22, 2019
    Member:
    #11745
    Messages:
    1,899
    Gender:
    Male
    Vehicle:
    2002 4Runner SR5 4WD
    Did you pull the pan when you did a fluid change? If not...I would pull the pan and inspect. Replace the filter. See if that helps. I'm not expert on these either.
     
    speedmaster likes this.
  4. Oct 2, 2020 at 11:58 AM
    #4
    speedmaster

    speedmaster New Member

    Joined:
    Oct 1, 2020
    Member:
    #17077
    Messages:
    24
    Gender:
    Male
    I'm most certainly not an expert on these things but I have over the years seen some funky behavior in ATs when the fluid is low. And some are extremely particular about how you measure: hot vs cold, park vs neutral, flat ground, etc.
     
  5. Oct 2, 2020 at 12:00 PM
    #5
    negusm

    negusm New Member

    Joined:
    Oct 22, 2019
    Member:
    #11745
    Messages:
    1,899
    Gender:
    Male
    Vehicle:
    2002 4Runner SR5 4WD
    Yes. Pulling the pan may show junk in the strainer...which would limit fluid flow. Too much junk and it's plugging up places. And it could act like the fluid is low and be weird.
     
  6. Oct 8, 2020 at 2:58 PM
    #6
    trspaulding

    trspaulding [OP] New Member

    Joined:
    Sep 30, 2020
    Member:
    #17056
    Messages:
    4
    Vehicle:
    2001 4Runner SR5
    Tranny is being rebuilt. Apparently a orbital plate (or something like that--don't remember what the guy said) broke and the inside was a mess. Should be done tomorrow. Stoked to get her back!
     
  7. Oct 9, 2020 at 8:17 AM
    #7
    negusm

    negusm New Member

    Joined:
    Oct 22, 2019
    Member:
    #11745
    Messages:
    1,899
    Gender:
    Male
    Vehicle:
    2002 4Runner SR5 4WD
    Nice. Thanks for letting us know. How much was the rebuild?
     
  8. Oct 9, 2020 at 8:44 AM
    #8
    Fishguy

    Fishguy New Member

    Joined:
    Aug 31, 2020
    Member:
    #16446
    Messages:
    37
    Gender:
    Male
    Vehicle:
    95 4Runner (stock)
    Replaced EGR vacuum modulator!
    My 4 Runner guru/junk yard has transmissions for 2nd gens (I know yours is 4th) for $200.00. He was 5 or 6 of them because "they never break".

    Sorry to hear about your problems. These Aisin transmissions are the best out there.
     
    PJ2001 likes this.
  9. Oct 9, 2020 at 8:48 AM
    #9
    trspaulding

    trspaulding [OP] New Member

    Joined:
    Sep 30, 2020
    Member:
    #17056
    Messages:
    4
    Vehicle:
    2001 4Runner SR5
    I'm a 3rd gen.

    Total rebuild came in at $3,085.39. Had it done at a a reputable tranny shop locally. Called around and all quotes were basically the same. Apparently the planetary gears in the overdrive section failed and were all blown to crap.

    I spent 2 weeks looking to find another vehicle to purchase instead of rebuilding the tranny but couldn't find anything worthwhile without spending $10K plus. A used transmission would have put me about $1800. I'm happy to have the piece of mind of a fully rebuilt transmission with a 2 year/24K warranty.

    Stoked to get her back. I miss the old girl.
     
    Toy4X4 likes this.
  10. Oct 9, 2020 at 1:12 PM
    #10
    negusm

    negusm New Member

    Joined:
    Oct 22, 2019
    Member:
    #11745
    Messages:
    1,899
    Gender:
    Male
    Vehicle:
    2002 4Runner SR5 4WD
    Used car prices are through the roof. People are fleeing the new car market because the economy is tanking. I had pay way too much for a 2008 Mazda 3 hatch for my daughter. $3k in today's climate to get a reliable 4Runner going is definitely your best bet.
     
  11. Oct 9, 2020 at 1:41 PM
    #11
    trspaulding

    trspaulding [OP] New Member

    Joined:
    Sep 30, 2020
    Member:
    #17056
    Messages:
    4
    Vehicle:
    2001 4Runner SR5
    I know... been looking at Tacos.... don't even get me started. 20 years old 250K miles and $10-13K. Bonkers.
     

Products Discussed in

To Top