Dobinsons and bilstein 5100s

Anyone have pictures of their ride with this setup: bilstein 5100s front and back. Front at 0 and Dobinsons c59-300 and back c59-599?

 

Hope this helps

 

How does it ride vs stock?

 

Runs amazing it’s better then stock , and most important it doesn’t rub with the 285, also no more nose dive

 

So you have that exact setup and 285's?? Has you gas mileage hit been bad?

 

Are the Dobinsons 300 and 599 the stock oem replacement where they are just stiffer than OEM, but not higher? Can you explain the differences? I was going to get these myself but considering the slightly higher ones as I do have the Bilstens but on the 4/5 setting, cornfed spacers in the rear with stock OEM coils. I'd like a bit stiffer coil but not have to lift everything again, then worry about getting the drop kit for the transfer case etc and control arms.

** Ah differences being front and rear. Are these larger than the OEM and what the Bilsteins 5100 come in? I have the 6112 and rear with the reservoir.


**Answered my own question. Per the Dobinson Rep

"Hello. Our C59-599 rear coils are the lowest height lift coils we make. They will lift 1" to 1.25", depending on loads and weight added to the rear"